PLA+ Filament 1.75 mm, Upgrade Pla+ 2.0 More Robust and Stronger 3D Printer Filament 3kg Spool, Max 300 mm/s Printing Speed, Dimensional Accuracy +/- 0.02 mm, PLA+ Black+White+Gray

Techbears, The only brand I've never had a failure with, and used straight from the bag.Print qualities are excellent, same goes for detail that can be achieved with a 0.2.P1s & A1 printers.

Very well packaged and precision wound on a plastic spool that fits my Hankermake printer .Prints really well.

Bought for a good price item arrived well packaged but the vacuum bag had a pin hole in it through it in the dryer and it worked great no strings or blobs and a good colour will buy again

Not stringy and always ends up with a nice looking finish

Nice clean white filament.No adhesion issues over the filament I normally use.The filament seemed reasonably consistent and I didn't come across any winding snags so far.End result prints look nice.Came with resealable bag for storage to help keep it dry which was nice.

Although I can see some benefits, I have yet to be convinced of the need for PLA or PLA+ filaments. On my K1 I normally print with PETG, finding it easier to use and that it produces a more stable, durable, 3D print. I normally print with a filament dryer but as this is a freshly opened spool, no dryer was used.Under Vine I was recently offered this TECBEARS PLA+ 2.0 Black filament. Based around appearance, performance and price, have I changed my mind? In a word, yes (but with a caveat).This black PLA+ 2.0 filament is well packed and supplied on a plastic spool. Personally, I prefer a plastic spool as it runs freer in the dryer than a cardboard spool. I like that two suggested printing temperatures are printed on the spool (for print speed ranges) and that a plethora of information is included on the box. However, strangely, the print temperatures are not included on the box.Out of the box, the black filament is as you would expect. Unlike most PLA filaments, the raw filament does not feel brittle (and is actually very resistant to breaking) but it does discolour if you bend it.In use, I initially used a Creality Print stock CR PLA+ profile and had no issues whatsoever. The parts printed cleanly, uniformly and flat.The image is of the part I produced. It is called ‘Nautilus Gears’ and was downloaded from Thingiverse. I was very pleased with the overall appearance. The 0.16mm layer lines are uniform and virtually unnoticeable.Price wise, this filament is as cheap as chips. An absolute bargain, particularly given that this has the benefits of being + as well as 2.0.In summary, easy to use, produced a part that was dimensionally accurate and assembled easily. Very pleasant and uniform in appearance and extremely competitively priced.The caveat? This comes close, and I prefer this over all other black PLA’s, but I would still choose a Black PETG, hopefully sourced from TECBEARS.

It keeps snapping like it is old and dry

This review is for TecBear’s White PLA Filament. I received this PLA from TecBear free of charge via Amazon Vine for my impartial reviewI print using a Sidewinder X1 printer with a 0.6mm volcano hot end. I typically use a temperature of 195c for PLA and a print speed of 60mm/s. As I print mainly functional parts quality is not my first priority and neither my printer or Cura profile are tuned to perfection but I think this helps good filaments stand out.TecBear’s filament comes on a plastic spool. This is ideal for me as my spools sit on rollers and the plastic spools minimise friction. The filament is vacuum packed in a bag that can be resealed thanks to its built-in zip lock function. I wish more filament manufacturers would use this method so that filaments can be preserved longer..`The filament is well wound upon the spool and the colour is a pure white. While not a matte colour, this PLA is one of the most matte of my ‘standard’ white PLA Benchy collection.On the box, the recommendation is for a nozzle temperature of 200c to 210c for standard PLA. I chose to use the lower end of 200c and I am aware my volcano hot end is very good at lower temp printing.The sample Benchy I produced in this review was one of the best I have ever produced. I am amazed to get this quality of result without further tuning or by using PLA+. Despite the 0.2mm layers, the hull barely shows any layer lines and the helm cabin had no stringing. I do not usually get such good results out of the box.In conclusion I am very pleased with the performance of this PLA on my printer, and on the thought taken in packaging. I would be happy to recommend this filament.

Buen enrolladoBuenas impresiones

Mycket bra kvalitet. Mycket bättre än det som säljs i Sverige

Lässt sich Super Drucken und das schwarz ist echt sehr gut. Bis jetzt keine Probleme mit gehabt.Duchfluss kan gerne auf 20mm/s gestellt werden.Auf beiden Druckern (A1 und A1 Mini) keine Probleme gehabt.

Lot sympaPla couleur bois et ne comporte pas d'impuretés pouvant boucher la buse

-great layer attaching-great color intensity-dry