Flux Pro Full-Tower E-ATX PC Case, 6 PWM Fans Included, Black

Really, this is an awesome case. It's massive, has nice airflow, looks great with the wood accent, and is easy to build in. It comes with 5 fans! So far, I have no plans to add more; my temps are great. The front, top, and side panels all pop off instead of needing thumbscrews (front is also held on with magnets). One of my favorite small things about this case is that the front panel connections are integrated into one connector, instead of having separate, tiny connectors for the power switch, reset switch, etc. Also enjoyed that it came with a small set of screws and standoffs. I'm not using it, but the iShift for the PSU is a nice feature. The CPU/GPU temp display is neat, but you do have to download Antec's iUnity software to use it. I don't love needing extra software to use the display, and I can't really see it the way my desk is set up, so I probably will just keep it turned off. The PCIe slot covers are reusable, so no need to worry about popping off the wrong slot. Most of the cables were already routed and the cable management was good. Managing the rest of my cables was a breeze, especially after taking out the bottom chamber drive cage. It's going to be a long time before I buy another case. This one is 100% worth it.

The Flux Pro is hands down the best case I have ever personally come across in years of building PCs for myself, friends and family. - Nicely shipped, comes in a box with molded foam padding holding the case securely in place. - Includes plenty of screws etc. for various arrangements, multiple SSDs, as well as a nice transparent plastic screw case/organizer with movable separators. - Spacious and easy to build in. Plenty of space for large CPU coolers and GPUs. Comfortably fits Noctua NH-D15 with room to spare. - Great options for cable management inside the case with preinstalled loop straps for cable bundling. Existing cables inside the case (e.g. for front panel) are very well managed also. - Included fans are very efficient and high quality, getting 6 of them included makes this case not only great quality but also a great value. They come pre-installed and hooked up to a small daughter board near the front/top panel with nicely routed cabling. - Excellent and quiet air cooling performance. Using AMD 9800X3D and NH-D15 cooler, Sapphire AMD 7900XT GPU with default curves on the case fans, baseline 40% on the NH-D15 up to about 60C and an aggressive curve ramping quickly to 100% by 80C. The resulting system is totally silent for basic use and nearly all gaming loads; fans only become audible under very CPU heavy loads like code or shader compilation. Most of the time the GPU fan (and some GPU coil whine...) are the loudest thing in the system. I rarely ever see the CPU above about 65C, and even maxing out all cores I simply can't get it much above 76C with instant peak of 81-82C before fans catch up. Of course the 9800 and Noctua also get credit for this, but it's truly impressive how quiet it is. - The HDD rack in the lower bay is easy to completely remove if you aren't using it, for slightly better airflow from the two lower fans pulling up through the bottom of the case. - Power supply is easy to install with plenty of room for dealing with cables thanks to the large mostly empty lower bay. - The mesh front panel and small holes on the bottom panel do a good job of minimizing dust in the case. Not perfect, but very good given the outstanding airflow of the case. The spacious interior also makes it easy to clean. - The USB ports and power button on the top/front panel are solid and firmly mounted. - The CPU/GPU temperature display works well (with required software installed) and is kind of cool. - I didn't really care about the wood accent when I purchased, but it looks quite good and is a nice "premium" touch. - No quality issues with my unit of any kind. A small nit, but depending on the arrangement of your motherboard, the cables from the front panel may be very slightly on the short side. Not really a problem, but for one of the cables from the front panel I had to basically force a shortest path diagonally across the back of the motherboard (ignoring most cable management) to be able to reach the far left side of the bottom edge of the mobo.

Fans came pre installed and wired to their hub. Easy and plenty of room. Side panels are like cabinet doors. They have pegs that slide easily into pressure locks. Mine came with the SIDEMOUNT PSU connect preinstalled. But easy to remove and be normal. Will fit any gpu and I guess my 420MM aio is actually TOO Small to fill the top. Check case specs for optimization. Very good case. The side view temps is a great bonus.

Absolutely wonderful. It's genuinely a beautiful case where functionality and artistic sense come together. The aesthetic is perfect with the wood frame on the front giving it a nice classy feel without being over the top. The case fits my ATX motherboard + RTX 4090, and a 360mm AIO with ease. It does wonders to help with temps, the larger size and design (upgrading from a Corsair 5000D which I liked, but struggled with high temps) guarantees good airflow and the fans it come with work great from the get-go, no extra fan purchases are really needed unless you absolutely need the quietest of the quietest fans. Noise level is pretty standard, but definitely not silent. However it may be possible to make it very quiet with some tweaks in the BIOS. There's a little rubber piece that was missing where the PSU sits I think (it has been a while since I purchased) but in the end it's not that big of a deal, my satisfaction with how it performed and the ease of working with it far outweighed that little minus. Overall, this is it for me, my forever case. I have no need nor want to ever use another case. I'm so satisfied with this one. I don't think it's possible for this case to not be a good purchase, unless it simply didn't fit your needs.

This is without question the best case I've ever built a system in, after 25 years of building computers. Everything was thought out extremely well and everything has a purpose. The ventilation into the shroud area is present front, back and bottom, with reverse flow fans to draw some of that air up to the GPU. The top comes completely off for full access to placing fans, radiators, or even hooking things up through the top while installing components. The top and rear have a sliding track that you can move your fans along to be in the location you want, and the whole 3 fan assembly up front has 5 different positions to move, up or down. The altered direction PSU is a game changer for installing and removing cables and for cable management. All the cable routing can easily be done in pre-made paths that are all velcro'd. I didn't have to use one zip tie and ended up with the best cable management I've ever had in probably 30 builds thanks to the multitude of perfectly located cutouts and the velcro cable tracks. Included is a quality screw box with strong, good quality metal screws of all the types you will need to build your system. All are in labeled packets. I had no problem fitting any of my components in. Every piece has room and air around it and my system stays much cooler than it ever did with a 4070 Ti Super and a12900k. The case is rather heavy, so be aware of that before you lift your completed system. It is solid steel for the most part and I found very little if any flex, even with both sides and the top off. I highly recommend this beautiful, well-designed case. It is on the more expensive side, but you'll likely keep it for many years.

I was building a new computer and this was released at the same time. Some good reviews showed up on well known Youtube channels so I took a chance. It's an amazing case. It's very modular in how you can change things. They thought of almost everything. Plenty of space to fit anything you want and easy to work inside. The fans are already wired to a fan controller and cables are managed. Easy to install fans or radiators on the top and front since the bracket comes out. I had no problems wiring everything and nothing was pinched. You can fit a ton fans and still not be cramped. Water cooling would be easy in this case. The exterior has a really nice texture and the wood accent isn't obnoxious. It does move a ton of air. I put all fans on full and left the side panels off and I could feel air across the room. Once I set the fans to PWN they acted normally and it still has a ton of airflow. It's mostly tool-less except when you move some brackets around for fan mouning. So far it's quiet and cool. Even on heavy games with fans ramped up it's barely noticeable. I didn't think I would be this impressed since it was a new release but Antec released an incredible case.

Best case I ever invested it, the size, space and layout make building and repairs a breeze. Easy to snap all panels off and on. Only thing I don't like is the Unity software required for the integrated display to work is off on actual CPU temps by a whopping 10°C all the time somehow. I wish there was more options when it comes to interfacing softwares. Luckily third party tools exist that I will look into

I read some reviews (not only here but various places like Newegg) about quality control issues like scratches on the wood - mine came perfect! Airflow is absolutely amazing! You WILL NOT ever have to worry about leaving a side panel off for cooler system temps because the airflow is TOP NOTCH! Since I went with liquid cooling with this case I was able to set a custom fan curve in the BIOS of the motherboard (MSI MAG X670E Tomahawk) and make both the case and radiator fans run dead silent and the system still runs cool! Case fit the ARCTIC Liquid Freezer III 420 AIO without having to move the front three fans down! So out of the box there was no tweaking or fussing required to mount the big dawg 420 AIO! I AM SUPER LAZY with cable management. I haven't bothered with zip ties or putting any effort into cable management on my last few builds because if something goes wrong and you have to take it back apart you have to fuss with all those cables and zip ties but the way that this case is designed (see my second pic) it looks that clean inside and I did absolutely NOTHING as far as effort put into cable manage! I simply found the cable hole nearest to the connector on the motherboard that I wanted to plug into and that was it! However, if you're going to populate all of the hard drive locations like I did you won't be able to fit all of the harddrive cables into the built in velcro straps down the center along with the large mobo power connector but who cares since once you put the side panel on that side you never see any of those cables behind the motherboard anyway and the side with the motherboard/glass window will look clean and managed with minimal to zero cable management effort. The case is also solid and built like a tank and I find all of the I/O connectors on the top useful and placed well. I chose this case because of it's blend of high performance, highly configurable and compatible with all sizes of liquid coolers, and the main reason I chose this over others is that it looks more like a piece of furniture rather than some gaudy in your face "gaming" case. The sight of it doesn't draw and distract your attention (I'm the type of person who sets my Windows desktop to no wallpaper/solid black background and will cover bright power lights on audio gear with black electrical tape so that they don't distract and draw attention while watching movies in a darkened room) but when you do look at this case, it has a very pleasant on the eye piece of furniture look WITHOUT SACRIFICING performance, compatibility, and configurability. I did consider the Fractal Design North but felt that was a tad too much wood on the front and the Antec Flux Pro looks a lot more subtle and disappears and blends into the background of the room more. Also, the case was sold and shipped by Amazon and arrived super fast (two days normal shipping) and no issues with delivery and no defects in the case what so ever. Perfect five stars from start to finish! I normally don't waste my time writing reviews, even when I'm happy with a product and everything goes well, but Antec really knocked it out of the water with this case and it exceeded all of my expectations! I'm glad that I spent an entire week researching cases and narrowing it down to this one!

Gabinete lindo, muito bem construído, com um fluxo de ar excelente, já melhorou bastante a temperatura, tanto da GPU quanto da CPU. O gabinete é Full Tower, então você precisa ter um bom espaço pra acomodar ele, segue a foto em comparação com um Mid Tower

This case is very well built, like a Lian-Li, it's also very well thought out, like a Lian-Li. The wood detailing is beautiful, the added CPU and GPU temp LCD display is a bonus. It's easy to build in, no worrying about cutting yourself as it is machined to perfection (like several other Antec cases I've bought as of late). I think that after the Antec Performance Series P120 Crystal, Antec Performance Series P20C, and the Antec Performance 1 FT, all impressive in their own right, and now the Antec Flux Pro, I'd say that Antec is back and not only back but at the very top with Lian-Li and Fractal Design in terms of the top 3. Antec is releasing bangers that's for sure.

空冷やるなら最強かもしれない

Es quizás una de mis mejores compras que realicé para un nuevo setup. El diseño es realmente muy elegante, presenta un muy buen flujo de aire y con la cantidad de ventiladores que viene es más que suficiente para sentir la baja temperatura a la que puede llegar. El diseño de gromets para cableado es genial, bastante modular y con muy amplio espacio. El software iUnity es fácil de configurar. Consideraré incluso colocar ventiladores ARGB para aprovechar sus conexiones que vienen incluidas en el chasis.

Beautitul case easy to work with and put together lots of airflow. 5 stats!