Sir this product can use for pulsar 180

This product is as useful to engines without a radiator as tampons to men.

I want to flush my ertiga radiator so please tell me the process. Can i pour the flush liquid in coolant reservoir or at any other pkace in radiator.

Hai, A coolant flush, also referred to as a cooling system service or radiator flush, is the process of adding a cleaner to the cooling system to eliminate sediment or rust, These are the following process to clean your radiator. 1)Ensure the engine is completely cool. You will not be able to work otherwise. The engine is coolest when it has not been operated for at least two hours. This step is vitally important as coolant in a recently-used engine can be extremely hot and can cause injury if it comes in contact with your skin. 2)ack up the front of the car. While not strictly necessary, raising the front of you car makes it easier to work underneath the radiator and helps eliminate air bubbles from your coolant when you flush the radiator. 3)Raise the hood and locate the radiator. The radiator is usually near the front of the car next to the engine. Clean the metal slats on the front and back of the radiator that allow air to move throughout (otherwise known as fins) with soapy water and a nylon brush. Brush in the direction of the radiator fins to remove dirt and grim (not against -- this may cause damage the fins).[2] It may not be possible to clean the slats, as the A/C condenser is sometimes mounted in front of the radiator, blocking the slats. 4)Ensure the existing radiator works properly and is in good working order. Look for large patches of rust, corrosion, or leaky pipes and hoses. If, for example, you can smell antifreeze while driving, you may need to take you car in for a larger fix than simply flushing. The radiator cap acts as a lid for the radiator keeping it pressurized. It consists of a spring coil stretched between a wide flat metal top and a rubber seal. The tension between the seal and the spring is what allows the radiator to maintain the proper pressure. If any part is worn out, the cap may need to be replaced. Two hoses run from the radiator. The top hose is where hot coolant enters the radiator, and the lower hose is where cooled coolant enters the engine via the coolant pump. Ensure that neither hose is collapsed, as this will prevent coolant from flowing properly. 5)Center a drainage pan underneath the radiator's drainage valve, or petcock. Petcock's come in various shapes and sizes, but they are all small plugs that you can pull out to drain away fluid. Put a pan underneath the petcock to catch all of the fluid when you drain it. The petcock is usually attached to the bottom of one of the radiator tanks and is the only bolt you will find there. You may need to remove a small plastic covering from beneath the radiator to get to the drainage valve. This can be done with a screwdriver.

Manufacturer	LIQUI MOLY- GERMANY, Liqui Moly
Brand	Liqui Moly
Model	LIQUI MOLY
Product Dimensions	5 x 4.6 x 17.2 cm; 250 g
Item model number	LMRC
Manufacturer Part Number	7898
Volume	300 Millilitres
Colour	MIX
Stain Resistant?	No
Assembly Required	No
Manufacturer	Liqui Moly
Country of Origin	Germany
Imported By	ANSYSCO ANAND LLP, F-19, Sector -2, Industrial Area, Parwanoo, Himachal Pradesh – 173220 (India); Email: [email protected]
Item Weight	250 g

Liqui Moly Radiator Cleaner (300ml)

Description

Specifications

Common Questions