TINMORRY Filament TPU 1.75 mm, TPU Filament 3D Printing Materials for 3D Printer, 1 KG, 1 Spool, Transparent

I bought the Olive Green PETG-ECO to use on my BambuLab A1.There wasn't a filament profile in my slicer and the info on the box was slightly different to the info on the reel, so I contacted Tinmorry to ask questions about the filament density and such so i could create one. They were really helpful and sent me profile that i could import into my slicer for best results. I was very impressed, the PETG-ECO printed beautifully with no issues and colour was just what i was looking for.The filament itself was well packaged and vacuum sealed with some desiccant inside. It was neatly wound and printed with a nice consistent colour.I would happily buy this filament again.

I didn't do much research before buying and didn't realise how brutal carbon fibre is on non hardened nozzles also if you have a stock pre 2022 midrange printer your hotend likeley won't be all metal and will offgass toxic hydrocarbon carbon flourides.Dispite all the negatives I've listed this stuff is great, it prints better than most petg with a lovely finish and good bed adhesion and if I were to give it an arbitrary rigidity value I would say it is 15% more rigid than normal petg 50 percent more abrasion resistant but 20% easier to cut/scrape with a knife than normal petg.Owing to the increased strength and temperature resistance I'm saving this for printing hotend mounts/shrouds

I got 2 3d printers and I printed PLA and ABS usually. Tried PETG now (did before another brand but found it hard as would do a mess on your nozzle - sticks to nozzle picks it up moves to another position and so on) and this brand of PETG is excellent!! No mess, no random deposits and the stringing is minimal (note that I did printed at 245 with bowden ) Very good surface and no warping. Also see the 3 Rd picture - that was done without support and I did expected to sag as the temperature was high - but it didn't, and came out maybe bit better then PLA! With a max fan of 40% variabile from regular 20 to 40%, layer time 10s, first 4 layers no fan. This was printed on a Tronxy xy2 pro mainly stock but well tuned the most important settings were: travel speed 120, 6 mm retraction at 20mm/s!, flow at 96% from slicer with a master flow setting via start gcode at 95% so equivalent of 92% flow overall. (This low flow setting might be specific to my machine but worth to try lowering it if your head picks up material and drops it randomly on your part). Part came out strong and flexible, came off the bed easy - so 99% as easy to print as PLA. So is very good and recommended! I would advice for anyone wanting stronger material than PLA but not as warping as ABS to spend time and dial settings for PETG as once you got it you will have the same results as PLA, but much stronger and weather resistant part. I will for sure buy more PETG from this company. And by the way they did sent a zip bag so I could store the old filament. Also please note I did dried the filament for 4 hours at 55 degrees even if it was vacuum sealed with silica gell in it, as I do with any filament before using it.

Printed well on my ender 3 v2. The colour was exactly as described and vibrant. Filament slightly stringy (I know Petg is known for it) but I even with changing multiple settings I can’t seem to dial it in to reduce it much. Maybe the spool has a slight bit of moisture in. Good filament for the price though!

Prints great using standard Creality slicing software and settings on Creality K1 and K1 Max enclosed printers. Very strong and tough for structural parts with the right design work, infill settings etc. Really nice finish too. Good price, will be buying more of this.

Prints great at 225C. Very little stringing on my Ender 3 V3 SE and as I've gotten used to using it, I've been able to bump the speeds up a fair bit. I'll definitely be using this again when I need another roll.

Very happy with my purchase. Amazing printing quality pteg. I got black colour filament it's nice and shiny prints. Definitely will buy again this brand.

Most of the good reviews for this product are for PETG. I bought TPU and what a mistake. In order to get the right settings for my Bambu X1 Carbon I had to join a facebook group, which is outrageous. No data sheet with the product. I found some settings on the web to start with.I wanted to malke a phone case but no matter what settings I tried I could not get it to print properly, with stringing and the filament failing to extrude part way through.My opinion is that the TPU is rubbish, I am sending it back.

I can't praise Tinmorry PETG-CF filament highly enough. It is easy to calibrate, easy to print, and allows me to produce highly durable functional parts with precise dimensions and beautiful matte finish. With it, I have never encountered any warping, stringing or delamination -- it is very tolerant to both printing and bed temperatures and fan settings, which can deviate from "perfect" but still yield a good result. I don't remember a single failed print, even when I accidentally used wrong settings (though, of course, the best results are obtained when all settings are correct). Clogging is also a non-issue, even with a 0.4 mm nozzle. With this material I can even print springs: it is rigid, but can flex and, more importantly, return to its original shape once the force is removed. For all it its great mechanical and aesthetic qualities, it is also quite inexpensive -- especially compared to the likes of PA-CF, which can easily cost twice as much, but are not as easy to print with.Now, some downsides, or rather "considerations". When printing with PETG-CF (or any carbon fiber containing filament), it is important to make sure you printer is equipped with _both_ a hardened nozzle and a hardened extruder gear set, as it is quite abrasive and can ruin your "regular" steel parts in no time. (For my Bamboo Lab P1S such upgrade cost me about $40). Sanding this material is usually a bad idea unless you're doing it outside and wearing a respirator mask, because the dust particles it produces are not biodegradable and thus very harmful to inhale. (Good thing you don't need to do it often because the finish is usually great as is). I'd also like to mention that this plastic is not fully radio-transparent because of CF content; so it is not well suited for making enclosures for electronic devices containing a functional radio antenna.Overall, it is a very reliable material yielding highly consistent results, and is now one of my favorites.

No tuve que mover ningún parámetro de la impresora, simplemente use el perfil para PETG estándar y funcionó a la perfección. El color y acabado realmente es impresionante, en algunos ángulos incluso desaparecieron las lineas de capa, definitivamente lo pondré en mis filamentos de uso diario.

As described.

das ist ein sehr schönes filament. lässt sich superleicht drucken und liefert top ergebnisse.meine pläne sind das petg-cf für rc-modelle und zubehör zu nutzen, da diese modelle nicht gleich kaputt gehen sollen zb ein auto, dass über einen bordstein knallt oder eine heli oder flugzeug, was bischen härter landet etc. diese teile werden verschraubt und auch das klappt super.hier in den bildern hab ich mal zubehör gedruckt. einmal ein schutzhalter für meine funke und das andere ist ein einstellbarer smartphonehalter, der auf den sender raufgeschraubt werden kann, so kann man auch telemetriedaten sehen und/oder ein kamerabild übertragen.ich kann das filament von Tinmorry wirklich empfehlen und freue mich schon auf meine zukünftigen bestellungen. vielen dank an Tinmorry für so ein tolles produkt :)

Zie foto'sGeprint met Bambo Lab P1S met 0,6 mm. nozzle. Nozzle temp 270°C, bed temp 75°C op PEI plaat met structuur.Max volumetric speed 11,5 mm3/sec., dit zorgt ervoor dat de print snelheid niet te hoog wordt, De eerste 2 lagen geen koeling en dan alleen part koeling. Deksel en deur van de P1S open op een kier van ca. 4 cm.De kwaliteit van de geprinte producten is zeer goed, bijna dezelfde kwaliteit als met de Bambu Lab PETG-CF filament.De spoel is van plastic en daarom geschikt om in de Bambu AMS te gebruiken.Carbon Fiber PETG Filament 1.75mm, TINMORRY PETG-CF 3D