Running Boards Compatible with Jeep Wrangler JL 4 Doors 2018-2025, 6" 2-Stairs Side Step Rails Coated Black Carbon Steel Nerf Bars

Great quality and looks great, well packaged, clear instructions, and even an extra parts bag. Easy install. Before and after pictures shown.

Arrived on time. Directions are a little sketchy but once you look at the parts it’s really simple. Fit up perfect. 1 hour start to finish and that includes removing the factory rub rails.

I recently purchased these runners and was impressed by the overall quality. The product arrived well-packaged, with all parts included, even spare bolts, nuts, and washers, which is a rarity these days. The runners look fantastic—great finishes, high-quality materials, and excellent craftsmanship.However, I couldn’t give this a five-star review, but not because of the product itself. The installation instructions were vague and unclear—worse than the typical ones you’d get from Ikea. The video provided by the company didn't offer much help either, as it was just a vague visual guide.Fortunately, my wife is great at puzzles and figuring things out, and after 30 minutes, we managed to match the correct bolts, washers, and nuts with each part. Installation took us a 30-45 minutes longer than it should have to due to the lack of clear instructions. I hope the company sees this review because they have a great product, and improving the instructions would surely lead to better reviews.

These are some very, very nice steps. These are well designed well-made the brackets fit perfectly and there’s no problem at all following how to put everything together. The only downside I would say is the instructions. Don’t really tell you or at least I couldn’t figure it out. what bolt she should use where so I ended up having to go get some more bolts because I wanted to use the bigger bolts and I ran out of those, and I thought that the bigger bolt should be used in more places and what they supplied that Other than that, everything is stamped and marked left and right and the brackets at Bolton to the Jeep were marked front metal and rear. Everything was very easy to put together all I would tell someone is to just bolt things up. Don’t tighten anything down get everything adjusted well and then go back and tighten everything up after you get it all put together, but I am really really happy with these steps and they look really nice

The entire process took me 1 and 40 minutes solo, which included setting up, removing the old running boards, figuring out all of the hardware, and mounting. The instructions are completely garbage.For clarity:M6 set is for the alignment screwsM8 set is for mounting to frame (don’t use)M10 is for mounting the running boards to the bracketTools required:M6 = 10mm socket and 10mm wrenchM8 = 13mm socket and 13mm wrenchM10 = 16mm socketReference the picture I attached for setting up your bolts: bolt > spring washer > washer > (component you’re attaching to > washer > nutStart by removing the factory alignment screws with the 10mm socket. Then remove the mounting screws with the 16mm socket. Slide off old running board.Each new bracket is marked with location. Hand tighten each bracket into place (do not tighten with sockets and wrenches yet). Mount the running boards hand tight.To finish, with socket and wrenches, start by tightening the M8 mounting bolts, followed by the M6 alignment bolts, and finally the M10 running board bolts.Build quality is pretty decent. Out of the box there were a few very sharp slivers of metal protruding. Ask me how I found out. Everything fit into place pretty well, I did have to tighten one of the rear screws in order to get the second to fit for both rear brackets. There were also a few scratches that were removed some of the powder coating from transport or production. All in all, they are not bad. Definitely an improvement over the OEM and matches perfectly on my Oscar Mike. The center step is a nice added bonus as it allows plenty of access to the roof.Stars reflect lack of instructions, random metal filings, and the few scratches I found.

The directions were easy to use and I breezed thru the assembly - I laid out the parts exactly how and where they needed to go, front and rear, D/P, etc. The driver side was easy (definitely do not tighten the mounting brackets as you may need to shift one of them a qtr inch or so). I decided to give myself more room for the passenger side and turned the vehicle around in the garage. HOWEVER… I 💯 forgot to switch where I placed the rear and front mounting brackets 🙄🙄🙄 and proceeded to assemble. After about 10min of swearing about the manufacturer (my bad), I realized my boneheaded mistake. Took me an additional 20 min to finish then it should’ve (90min). Love the finished product. My only complaint is it looks like they will be an absolute bit** to keep clean.

I agree with most that the instructions and video are extremely lacking!! 3 size bolts, the largest of which has 12 bolts, 24 flat washers, and 12 lock washers, these secure the running board to the bracket. The mid sized bolt, which has 6 bolts, 6 flat washers, are used to secure the bracket to the bottom of the body, then lastly there are 12 small bolts with 24 flat washers and 12 lock washers, these are to secure the bracket to the pinch welds, the head of which will face out towards you when your looking at your vehicle from the side. Once I sorted that out which didn’t take long it took me under an hour to secure both sides. Very sturdy and compliment my jeep quite nicely.

New 2024 Jl 2 door on for a monthOctober 18 - November 21st. Rust started to develop on driver side . Trying to contact for resolution! Looks great on truck very functional! Disturbing we have had no poor weather or salt or driver applied since application! Worry for long term issues! Good luck update if they stand by products!! ???Update they credited my account and shipped back boards.