KOMITASUI OFC Leadwire Turntable Headshell Wires, Silver-Plated Connectors Headshell Litz Wire for Turntable Vinyl Record Player

These fit the pins on MY Nagaoka MP-110 and AR XA aftermarket headshell with a very nice, tight fit. Sounds awesome too I've just ordered another set for my new Nagaoka MP-200.

These cartridge replacement wires clip onto posts easily and firmly. Well insulated 26 gauge wire are identified by color and letter. End connectors are soldered and crimped. They are slightly bulky vs original set. I don't plan to mess with these very much, they replace 40 year old original wiring that I might've touched 5 times total.

Wires were well packaged, neatly lined up in a plastic bag that was encased in a clear plastic container. Used the wires to install an AT95EX cartridge in an old Technics SL-1300 headshell. Connections to the cartridge were very tight; headshell connections were snug but good. None of the terminals slid the full way onto the pins. After final assembly I began to play an album but found only 1 channel produced sound. Verified it was not an issue with the amplifier and that the tone arm wiring was fine. I ended up removing the wires to test them. 3 were fine - the green wire was intermittent on the end connected to the headshell. Removed the sleeve and found the wire was not attached to the terminal. There was no indication the connection should have been either crimped or soldered (the bare end of the wire was clean and still a round twist). The wire just slid out cleanly. Soldered another terminal on (from the old wires), reconnected all, and now have a working turntable. Did not remove the shrink tubing from the other 7 ends as they were fine so I do not know if the wires are crimped or soldered, but this one was neither. Considering the care given to the packaging, I am disappointed this got by whatever QC is done and resulted in so much time to trouble shoot and resolve.

Too long and to loose for technics head shell with Stanton needle

More phono cartridge leads. The standard chrome tips fit well on my cartridges and headshell, wire is a decent weight, but still flexible, but the best part is the way they're wrapped tip to tip in the wire color. This makes it easy to tell at a glance if you've completed the install correctly. They sound good, function as intended. are made well, and they're really inexpensive. If the original wires in your headshell look all corroded and junky, these are an excellent alternative.

Well-made and sounds terrific!

Kinda long and flimsy. Don't know if they'll stay positioned in the headshell without sagging.

These do not fit my denon headshell or my nagaoka mp-110. all 8 connections were sloppy which means they are useless.