Brampton Marine Epoxy Strong Bonding for Boat Repair - Bonds in 30 Minutes, Water Resistant, 4 Ounces

This work so good, follow instruction apply in warmer weather of use a heat gun or hair dryer to warm the surface being repaired. I went a little crazy and put on six coats inside and outside of a hot tub shell with hair line great that lost 1/2 the water level every two days. It’s now been holding no leak for two weeks. 🙏🙏🙏🙏🙏

Convenient packaging and seems to be a good epoxy. Easy to mix and waterproof.

I used this along with fiberglass woven cloth to repair pool filter housing crack. I applied this on the inside. It is holding under water pressure .

I ordered this when working on some boat repairs. It is some of the fastest curing resin I have ever used. It cured quick and well. Mix in small batches and be aware of the quick cure time. Otherwise it cured nice and strong. used it to fiberglass some boards together.

This epoxy is easy to mix and apply, but keep two things in mind - it's a bit thick, so wetting out glass cloth (don't use strand mat unless it's specifically epoxy rated) can be a bit tricky, and they aren't kidding when they say the working time is 5 minutes. This stuff is great for patches and crack filling (I used it to repair a bathtub that had been damaged in shipping) but I wouldn't recommend it for laying up any items of large size due to it's fast cure time. My rough guess would be no more than a 1' square patch with 3 layers of glass - and have plenty of spreaders handy. My preferred way to laminate a patch using quick cure resin is to precut the glass, set the pieces on some visqueen, pour the resin on the cloth, spread it, lay another layer of visqueen over the wet glass, and then spread with more pressure. As soon as it's wetted out, peel the patch with the top layer of visqueen off your work area, and slap it onto the area needing repair. Note: you may want to slightly prewet the patch area with resin, especially if it's textured or rough Work out all the air bubbles (quickly, you're on the resin kickoff clock!), let it cure, and then peel off the visqueen. Keep in mind that the strongest laminate will have only enough resin in it to wet out the fiberglass completely, but in a repair situation, this epoxy seems to do a good job of filling the voids, and appears to be strong even without glass fibers infused into it.

This could be the strongest epoxy I’ve ever used. Had a fiberglass pool filter with a hair line crack. Used this produce on both sides, very little dripping yet it did flowed where I needed it to go easily, stoped the leak, fixed the crack, sets up really fast, so be ready to work on project right away, no waiting around with this stuff. Any way great product would definitely buy again. Thanks Brampton!

I got this for a boat repair. This is not really a marine epoxy, even though they say it is. This is basically a two-part, 5 minute epoxy that would come in a syringe, that you would buy at Walmart. I went ahead and used it on my boat. It's very thick and it sets very fast. I hope it will durable, but I have my doubts. Definitely would not recommend this for laminating.

Had my metal roof replaced at great expense. Sadly, my chimney mortar was crumbling and new roof was leaking in heavy rain. Decided to cover the brick and mortar with this epoxy until we save money to rebuild chimney. Dripped some epoxy here and there, but easily removed with heat gun and plastic scraper. Worked great. No leaks so far.