HORUSDY No-Spill Coolant Funnel Kit with Valve Switch

As it turned out, I didn't need this set.But I looked it over real closely and it seems good. All the pieces fit together just fine and it appears sturdy.I'll be doing some radiator work on my truck this coming spring so I'll have a chance to test it out then. Thanks//(~_~)\\ AU

You can't miss with this one! I have owned MANY different kits for coolant bleeders from all the typical auto store brands like autozones and advanced auto parts and so on and so forth... This kit is far superior and is more than fairly priced! Also the ease of use and quality is far greater than the price they're asking! 100% buy this kit if your looking to bleed/fill your coolant the right way! I can't believe the quality and low cost of this one especially after all the others i have tried over the years. Im just Very happy with this great product!

Oh how I love these. My original Matco one finally cracked and died... After 30 years of using the same one, I decided I would not be without.. No longer turning wrench professionally, there was no reason to buy the top dollar USA made unit, so Amazon cheapie it is! Way more fittings than my Matco, works the same, and my plunger fit the new one perfectly. Basically a clone of the Snap On Matco unit. First time I used it I was delighted. No leaks, burped the system, allowed me to bring system up to temp with no issues and to verify all air was out. A requirement any and every time you play with coolant!!

Worth the money I spent on it. Great price. Sorry no pictures. Watch a YouTube video on how to use this product first before mounting it on your car. I have no problems with the coolant pressure after using this tool.

I used this kit to flush my coolant system and bleed the air from the cooling system for my Infiniti G35. The G35 is known to be hard to bleed the air from the coolant system and this kit made it easy, it just took a bit of time.The instructions are very basic and lacking. I threw them away when I first got the product but when I used the product I just kind of figured it out as I went. You stick in the orange piece in to your radiator (G35 uses the "B" orange piece) after removing the OEM cap and then put the rubber gasket on top. Then put the matching metal "B" bracket/cap piece on top of the orange piece and then twist it shut. It should shut tight with the rubber gasket. Then screw the funnel piece on top. Very sturdy when assembled correctly. Took me a bit to figure out how to assemble it correctly.To bleed the air I just filled the funnel with about 1/4 full of coolant and then started the car. I let it warm up/idle while turning the heater on 90 degrees (max temp) and either half or full fan speed. The heater is a good gauge/indicator of if you have air in your cooling system. It will blow ambient temp air while there is still air in your system but will turn hot when you purge all the air out. I let it warm up then revved it up to about 3k for ten to twenty seconds at a time every once in a while. Make sure to watch the funnel through the gap in your hood while revving it up because it will start to rise and you don't want it to boil over and get boiling coolant everywhere. When it started climbing too close towards the top, I let off the accelerator. I had to shut off the car a couple times when I revved it too much and almost made it boil over. Occasionally I would squeeze the upper and lower thick radiator hoses about ten times to help purge the air out. At first my lower radiator hose was cool to the touch but as I purged more air out it became hot like it should be. Wear gloves and some safety glasses while doing this whole process because you don't want to get boiling coolant in your eyes and use common sense (aka don't take off the funnel assembly while it's boiling hot, don't taste the coolant, etc.) Took about an hour or so to get it completely purged.

Excellent product. Great value.

used twice and has worked great

Well... there are a few issues with the product. 1. The cap had a hard time fitting so "Universal Fitment Applicable to Any Vehicle" is a bit of false advertisement. When I did get it to fit (Admit-tingly Force-ably) or so I thought there was a small leak on the bottom on the cap. 2. After checking for why there was a leak... There was NO RUBBER SEAL! All other caps as for what I seen have a seal on it but this one did not! But other Reviewers had the same issue as well with the fittings/caps. Causing the small leak to come from the bottom of the cap. Where it did fit on without any leak was on the Radiator Coolant Reservoir... 3. A bit disappointing because again it's advertised as a "Radiator Bleeder Funnel Kit" You usually bleed from the highest point which is supposed to be on top of the radiator cap. Not the Coolant Reservoir. Again another false advertisement issue. Not good especially for the price.Do. Not. Buy.

El plástico es muy resistente

Good delivery time and updates.

I threw out the instructions so i was super confused at first but when i figured it out it worked perfectly

The media could not be loaded.  This kit is very well made and has some useful features, the tap lets you transfer excess coolant to a different bottle or the expansion tank. The handle makes it easy to carry, measurements are very clear and is handy to have. Comes with plenty of attachments. The lid isn't as tight as I'd like it to be once packed up however besides that this kit is great. highly recommend.

It did its job the way it should no complaints' thier. Worth the price and can see many uses for it. Cheers Lindsay.