Genuine Beko Oven Fan Motor 264440102, 1cm, Metal, 25dB, 6.3W, 230V AC, Compatible with Arcelik 9650DI, Beko BD533AK, ..., Leisure CK110F232K

Bought this to fix our oven when the fan stopped working. Easily fitted and quality is great. Saved us from buying a new oven

Received within two days and fitted in 15 mins.Direct replacement for a failed fan motor within a BEKO BDVC667S oven.Works like a new oven now.Excellent choice.

Directly related to the Beko D533W.This is a really simple replacement disconnect from mains, 4 screws inside the oven. 8 in the back.This is the same as the Espares fan which is the current replacement for the Beko original (But not the same dimensions).Out of the box this might not immediately fit. The shaft is 3mm too long so the fan interferes with the inner fan cover and doesn't spin. And as a result might have you thinking you need to replace whole cooker. However, if you bend the upper half of the upright part of the blades back (about 30 degrees. ) i used a pair of long nose pliers, this allows the fan to spin freely and had the oven working as new.I was able to take 20 degrees and 5 minutes off some baking roasting times once the fan was replaced.

All ok, good price fits ok have brought another one since for another oven beware of the scam where the supplier says that it a genuine beko part number which it may be but that does not mean that the actual part is a genuine beko part unless it specifically states that the part and not necessarily the number is genuine. this part seems to be genuine and ok, would recommend .

My beko main ovens fan kept catching and making a noise. Eventually the element burnt out and replacing it helped a little. However, the internal fan was still slow, sometimes noise / clattering and sometimes the fan would stick all together, causing the element to glow red hot.I found out that there is a fan attached to the motor on the other side / outside of the main oven ( I'm not a maintenance trained person). I gained access to the motor and it was somewhat burnt and sticky with old fat etc. After buying a new motor on Amazon, it was very easy to fit and it works a treat. Just make sure the fan on the inside spins cleanly inside the element, so that the motor isn't under strain. I would recommend this part and seller. Part arrived quickly and in good condition.

Fitted in about half hour . Terminals are in a different position. In this instance I put the yellow wire nearest the oven and blue wire on the other terminal . Works PERFECTLY although different. A great product at a great price . Thank you

I tried to fit the fan motor to my oven, but the fan motor does not fit my oven OIF21300B as stated. The fan motor spindle screw is 2-3mm shorter than the original fan motor that I have taken out. When I tried to fitted the metal fan blade back to the this fan motor with the supplied nut. The nut can only turn about 80-90 degree and then you can’t turn it anymore, I just need a tap on the metal fan blade the nut will came out, so this fan motor is not fit for it purpose.This also does not look like Genuine as well, it does not look like the original fan motor I took out from the oven. And the wire pin lay out is not the same too.The fan motor that is cream colour on the coil is the original I have taken out from the oven, I brought the oven brand new 2-3 years ago. The fan motor the is red colour on the coil is the one I received

Our Beko OIF22300X oven after turned off would trip the switch board some one said was the fan so bought this one easy to fit, great price quick to deliver, but was not this fan that caused the problem but kept it as now a spare, was the Cooling fan we needed that is on its way now