Ailun3 Pack Screen Protector for iPhone 15 [6.1 inch] + 3 Pack Camera Lens Protector with Installation Frame,Case Friendly Tempered Glass Film,[9H Hardness] - HD

This is not the first screen protector I tried; the prior one had only two screens and the frame to mount it was part of the protector; that one did not work well (bubbles, misaligned). Enter this one: EASY and perfect. I mean PERFECT. You clean off the phone (pro tip: wipe it all over front and back with a microfiber cloth, not the one in the kit). Then use the included wet wipe (pro-tip 2: have a clean area to work with no dust, etc). Then wipe/dry with the included fine microfiber cloth. Lastly, mindlessly use the sticker all over to remove and last bits of dust. Now, the reason this kit works so well: the included plastic frame snaps gently but securely around the screen. Now, you just can't put the screen on unless it is aligned. I removed the protective film on the screen protector itself. It is sturdy and easy to handle by the edges (I presume a single fingerprint would ruin it). I aligned the L edge of the protector with the L edge of the frame at a steep (> 45 degree) angle. This way, it is easy to move up and down so that the protector is perfectly aligned with the frame. Then gently lower it and let is settle. WAIT. Just wait. There will be at least one large bubble but it will slowly disappear. There were some small remaining bubbles. I pushed with my finger and got most of them out. Some wouldn't move but then I used my fingernail and firmly pushed to the edge repeatedly from different directions toward the edge: all bubbles gone. The edges needed to be pushed down and that was easy. Done.

The alpha-skinny: yes, the screen protector goes on easy without bubbles and I’m very happy with this product so far but I’m concerned about recommending because I haven’t dropped my phone yet to find out if it’s going to sacrifice itself and allow my screen to live on. But I’m fully confident in its capabilities as a scratch-guard and it feels as robust as my previous screen protectors that saved my screens and it actually completely covers the screen!The meat and bones:I’m not using the lens protectors which look great but I already affixed 3 independent lens protectors. I will certainly use a lens protector from this set when mine fail.This is a great deal: the screen protector goes on beautifully/perfectly and this set comes with 3 of these excellent screen protectors and 3 lens protectors too!I design products and I’m very picky when buying products.I do a lot of research.I always want the best of the best or the best balance of price and quality.(Here I feel I’ve got great quality and a great product…but again; I haven’t dropped it on the screen yet…)And I don’t like it when things go wrong; when a product sucks or has major flaws.I feel it’s disrespectful to sell products that are bad or clearly lousy in comparison with the competition.(So far everything I’ve experienced with this product has been excellent.)Sometimes I’ll buy a few ways of achieving similar results. To see what works best for me.I was especially concerned this screen saver wouldn’t fit right or it would trap dust and bubbles.(This product fits great and trapped no dust nor bubbles and isn’t budging.)I was surprised how extremely few reviews mentioned having problems attaching the screen protector without having problems with dust and bubbles.I figured I would certainly have these problems and was again surprised…because I didn’t have those problems.I think these clever manufacturers have come up with excellent adhesives. And the three-stepped lens cleaning helps too.Fortunately the included instructions and included equipment made it as fail proof as possible with an exception we will fix right now:These are the first two steps you’ll want to take to prep your operating table:Step 1: prepare a dust-free environment on which to work: pick a warm, dust free place -preferably indoors. Dust yourself off. Clean a 24” x 24” area on a countertop. Wipe it dry with a damp cotton towel or shop paper towel. (Not kitchen towel which may leave dust). Place a clean and dry cutting board or sheet of paper on this surface for backing. Open the package and lay your items in place.Step 2: prepare your hands and your iPhone: Wash your hands with a little dishwashing liquid to get your fingers oil/grease free. Wipe your hands dry with a clean cotton towel or paper shop towel. (Not a kitchen towel…) and use this towel to wipe your phone clean if you hadn’t already cleaned it.And now simply follow the instructions.•the package comes with clear instructions, wet wipes to first wash the phone’s screen, a microfiber cloth to wipe it dry and a dust collection sticker. Use the sticker on the full surface of your screen. And of course it comes with the screen protectors and lens protectors.After cleaning the iPhone’s screen in the 3-step process (wet wipes, microfiber dry wipe, dust removal sticker…) you’re ready to apply the screen protector using the frame that keeps the screen protector within proper limits. It works surprisingly well.(Btw I cannot stress enough the importance of making sure there isn’t even the tiniest speck of visible dust on your screen. It’s paramount to a proper, bubble-free mount. And having your phone warm helps the adhesive to properly seal itself onto the screen surface.)Be patient and allow the screen protector to slowly find its purchase onto your phone. I simply rubbed the top left and right of the screen and it began attaching itself from the center down to the bottom of the screen and out towards the sides. As soon as I saw any bubbles along the sides I gently massaged them over and out to the sides.some took a few seconds of pushing them out. I had two spots that took several attempts. I think it took almost a full minute before my screen cover looked perfect. As it does now.I have dropped a mobile phone twice in the 20 years and the screen protector saved me both times…so don’t expect any updates but I will update if the product protects or fails to protect my screen or lenses.If you don’t see an update you can assume all is well.Also I should mention I’ve never used lens protectors on any of my previous phones and yet been lucky enough to never had a scratch! But I stopped the habit of taking chances with my phone.In closing I would like to wish you -the review reader- a great product experience and also add that I’m very grateful to the product designers and manufacturers for making a very well made and noble product. Thank you!…I really hope these screen protectors will protect your and my screens in the event we drop our phones…fini.

These arrived on time and look to be of good quality. I have an iPhone 16 Plus and these fit perfectly.I cracked my last tempered glass protector and I needed a replacement. I ordered these based on the reviews. I have not accidentally dropped or scratched my phone since the installation, so I don’t know how well they will hold up. However, for now the quality looks good.Installation: I HATE installing screen protectors. I am the bubble queen. These come with some type of applicator device that is supposed to help. It helped but I still got a few tiny bubbles — but they were still nothing like how many I’d normally get. I was also surprised by the lens covers that were included. I don’t know if the product description says this but I clearly overlooked it so I was happily surprised. I didn’t install those becaue I already had some on. Overall I am happy with this purchase . Will update if I cracks for no reason. This comes with three screen protectors and three lense covers and all the things you need to install the protectors. 👍🏾👍🏾

A good cover, but there is no cutout for the selfie camera, only for the earpiece. I don't mind this -- I almost never use the selfie camera, and if the glass is clean, no real issue with there not being a cutout for the lens.Also, there is no physical installation guide to help with alignment, but since iI have several of those from previous screen protector purchases, it's not a real issue.Otherwise, it's a good protector.It would be an improvement to provide the same number of camera lens protectors as screen protectors.

These Ailun screen protectors are easy to install, cling on great and are very intuitive. I bought a three pack for the Iphone 14 pro and the Iphone 16, which my boyfriend just received due to breaking his phone.First thing out of the box, you get the bang for your buck! Each pack comes with multiple wipes including a dust wipe, dry wipe, alcohol pad and screen protectors, not only for the screen but the camera as well! The screen one fits perfectly and the camera clicks on very easily. We've had them for a couple weeks and there are no issues so far with touch capacity, the visiblity is clear, and no air bubbles. They stick great, and overall have functioned well for the price, and held up so far. They aren't peeling and the stickiness seems to be very adequate for the price. Overall a great choice for screen protectors!