rabbitgoo Window Film Privacy Frosted Window Film Opaque Stickers for Glass Doors Frosting with New Grid Design No Glue Anti UV Self Adhesive Sun Block Home Bathroom Office 60 x 200 cm

Wanted this to create privacy on a front door window pane without blocking out excessive light.FUNCTIONALITY : This has added privacy to a front door. When applied to the front door the FROSTED WINDOW FILM was extremely effective in adding a frosted white background to a decorative door window. Looking inwards it is not possible to see inside the house during both daylight and night time hours even when the light is on insider the house and it is dark outside.INSTALLATION: Installation required some level of care and skill. This was due partly to the curved frame of the window but also to the nature of the installation process itself.Installation of this film requires similar attention to details as when adding a protective screen to a mobile phone.1) Separating the backing from the film is not easy. The suggested technique of using adhesive tape did not work. Eventually it was necessary to pick at the film backing with a pointed surgical blade trying to get the blade between the film and backing. This worked and I was able to start the separation.2) Applying the film to the wetted window is straight forward. Once on the window, partly because the frame is curved, cutting off the excess film required care. I found that even with a very sharp surgical blade the there was a tendency for the film to be dragged down the glass in the direction of the cut and/or if the film was held in place to stretch slightly under the cutting action of the blade. Neither of these issues caused a problem but care was needed to ensure a good cut. This may have been because of the curved frame.3) Smoothing out the water. This was easy and straight forward using a credit card type piece of plastic.DUST: The window was cleaned before applying the film with a window cleaner to remove grease etc and then washed down. However after applying the film I noticed two specs of dust under the film. This in my view id not a problem with the film. It is more to do with the inability to keep the local area free from airborne dust. It is the same issue as when applying protective covers to mobile phones. One reason this dust got under the film may have been because I only sprayed the window with water. I did not spray the film a with water as I have seen suggested. This may have prevented the film picking up dust due to static. However I believe that it should be easy to peel part of the film away from the window and then remove the dust particle as you would when fixing a phone screen protector. I Haven't done this as you are only able to see the dust from 5-10 centimetres away and then only of you peer carefully and intently.DUST UPDATE : The film has been on for a few days now and the dust specks that were visible immediately after installation seem to have disappeared. At least they are no longer visible. The only explanation I can come up with is that the film has molded itself around the dust and because it is frosted the small dust particles have been come invisible to the eye.GLASS TEMPERATURE/CRACKING: Some reviewers have reported windows cracking as a result of installing BLACK film. Cracking in sunlight has not happened to my windows. Out of interest I measured the the glass temperature of the window with the opaque/frosted film, a clear glass window, and a true frosted glass window all in direct sunlight on a sunny and very warm day.All windows were above ambient temperature. The clear glass window was about 5 degrees above ambient, the true frosted glass window was about 7 degrees above ambient, and the window with the film was about 5 degrees above ambient.This suggests that in my case the frosted film is not causing the window to heat up unusually when compared with other glass windows. However, I can appreciate that a solid black film, because black absorbs heat, may cause the window to heat up more. For interest the ambient temperature at the time of the measurements was recorded on the device used to measure the temperature of the windows as around 30C.

Very pleased with the effect, just what I wanted. Applied to my caravan bathroom window for privacy. Very easy to fit. The hard part was peeling off the backing as I only wanted a rounded oblong shape. Took a while and had to use a cocktail stick to get a grip but was worth it.great product and a great price

Bought something similar years ago, but this product is far better. I ordered frosted and it looks great, for my garage windows because they overlook my garden and next door's. Easy to put up, the secret plenty of water on the window and the film once you take the backing off to put up. Easy to measure to ,the backing has a grid pattern on it, easier to cut to size. A must buy the tool for the job, a little plastic applicator it's a card with felt on one side, much easier to get the bubbles and the water out , I should have one years ago. The down side a little tricky to find the corner on the next piece you cut, but with patience and a fine blade I did it.

This is an amazing product for adding privacy and a touch of class to your windows.HOWEVER - you need to follow the instructions carefully.Think about the best sex you've ever had.... it needs to be taken slowly, you need to peel back the layers, and above all, it needs to be moist!If you rush it, don't take the backing off, or apply it dry, it will not work.Firstly, cut the sheet to the exact size you want (this is easier than trimming it once in place).Then use the little tabs supplied, to stick on the front and back, to pull the backing away from the product.Spray the window liberally with water (add a tiny amount of washing up liquid - and I mean tiny), and also spray the back of the vinyl.Then put the vinyl onto the window, starting at the top and pushing it down with your hands.Once in place, wipe over it with a dry cloth to remove any big bubbles.Then use a squeegee to push out all the other bubbles, from the centre to the edges.Once smooth, it will stay in place and look incredible.

Useless, I have used this product several times in the past 6 years, I don't know what they have changed but it is now useless, I cleaned the glass meticulously 1st using a very expensive glass cleaner changing clothes each time then using soap and water and a lint free glass cloth, after spraying the water and soap solution as you can see from the photos the product does not stick, when I went online for the company product support there is none they are not available, I suspect this to be redundant stock someone is trying to dispose of.

Very easy to use and does the job well.I found it tricky to separate but once one it looks good.

So impressed ! Managed to use this myself, didn’t need anyone to assist me, did my bedroom windows and looks so professional. Ridiculously easy to apply and fit, very very pleased indeed, can highly recommend.

I liked how easy it was to apply to the window and how tough it was I disliked the film you had to remove that could have been easier to remove but I do understand why it was there and liked the helpful cutting lines one film, if you how to wall paper this will be easy to do a good product

The window film is really easy to install and works amazingly. Looks really good and once it is set, and dried it looks like it was done at the glass manufacturer. Does a really pro job. I never write reviews but we are extremely happy with this product especially for the price.

Buena calidad. Queda increíble y fácil de poner

Vraiment occultant et facile à poser

Bon produit

Ho messo 4 stelline alla facilità da installare perchè la tipologia di prodotto necessita di un poco di dimestichezza per applicare la pellicola. Ma una volta presa la mano è veramente semplice e ti perdona anche eventuali errori di prima stesura. L'effetto oscurante è totale. Nessuno potrà più vedervi (io ho scelto la variante oscurante, n.d.r.). La tenuta è ottima. consigliatissimo sia per non mettere tende oppure per non mettere cannuccati se come me avete vetri sui balconi.