Cooler Master MasterFan Pro 140 Air Flow RGB- 140mm High Air Flow RGB Case Fan, 3 In 1 with RGB LED Controller, Computer Cases CPU Coolers and Radiators (MFY-F4DC-083PC-R1)

The Cooler Master 140mm fans fit my case perfectly. I had all 3 installed and cable managed in about 20 minutes. Each fan's wire leads are long enough to reach fan headers and the RGB controller from anywhere inside a normal Mid-Tower case. The excess wire would allow for use in much larger cases. However, I used my extra length to route the wires in hidden case trays and cable management ducts. The RGB controller is small and uses a magnetic mounting mechanism. The overall solution was painless to implement and the components work well together.The fans are very quiet. I replaced two 120mm OEM Phanteks fans with four of these 140mm Cooler Master fans and found it provided a dramatic reduction in noise.The LED lights provide a generous amount of illumination inside my case without being overpowering.The management software for the RGB controller has a nice visual user interface and provides flexibility in creating lighting effects.My only complaint is that Cooler Master does not fully support native integration with the RGB controller on my MSI motherboard. This would be a nice feature to have in the future for coordinating effects in both ecosystems.

These are great fans and push a lot of air. The downside is they can get rather loud if you have them set on Full Speed or have them alternate speed based on CPU/GPU temps. I set mine to run at Performance level through my ASRock X470 Taichi, keeping them at about 75% max speed, low noise, and high AF.The Best part is the controller works with the newer Cooler Master SF120 fans.

I really love that this is easy, quiet, and relatively simple to install. I was confused on where to put the backplate support but I figured it out, I just had never installed a cooler like this and the instructions were just pictures so I didn't realize how to install it on the back. Overall it is a great cooler and I'd reccomend it to anybody looking for cooler than stock cooler temperatures.

These fans are super quiet, in my opinion. Just be aware that with these type of RGB fans, the colors wash out because the LED is not bright enough to emit the light through the blades. I was aware of this issue before ordering them. You will never get true GREENS. Red works nicely, but it is not a deep red. I would not get these fans if you are going for a green setup, you will more than likely end up with a yellowish green. All in all, they do what they are supposed to do. If you want true, deep colors, go with ring RGB fans and not where the light goes through the blades. Works perfectly with Asus Aura.

My mobo (z370m pro4) doesn't support RGB but I wanted rgb fans. This was easy to install and get working. The backside is also magnetic which was SUPER COOL and made installing it a breeze. No double sided sticky tape needed. There is one extra rgb port on the controller that you can use to connect to any other device in your system. I had it connect to my p300 case leds and it worked fine. There are a lot of ways to customize your lights but unfortunately 'mirage mode' can only be turned on or off with no inbetween. Mirage mode also has a way to make port 2 different from the rest so if you have a special device that is different (aka 3 fans and 1 led strip) it would be best to set the led strip to port 2 on the controller. Software is easy to download and use. Fans are high quality and have rubber screw holes which eliminate rattling.

2 of the fans didnt light up properly with the rgb controller provided but worked just fine with asus aura sofware . terrible air flow for 140mm fans.

So I was looking for inexpensive lighting for a slightly older PC and at the price, these fans looked liked they would pair very well with a Hyper 212 Black RGB. I thought that since they were both made by the same company, the lighting would match. It doesn't. But my really big issue was with the software. I'm not sure how it happened but the first time I installed the software, it updated itself and the Cooler Master RGB controller software actually worked and allowed me to actually use it to control the RGB for all of the fans. Then I turned the computer off. When I turned it back on and tried to start up the RGB software it no longer worked. I uninstalled and reinstalled. Although I downloaded what Cooler Master said was version 1.06, after installation it says I'm running 1.01 and forces me to update to 1.01. It basically re-installs the same version which no longer even detects the controller. I know the RGB still works because some fans will light just after it finishes installing then turns off. I also removed the USB controller and used the included 3 button switch and that works to control the RGB but with very limited options. Cooler Master does say that this is compatible with several motherboard manufacturer native software but since I had an older board, ASrock's software didn't support my board.On the bright side, the hardware does work. Perhaps if Cooler Master fixes its software I might try and use the USB controller again. When it did work, it did allow me to customize the colors and gave more lighting options than the 3 button switch. I was actually satisfied with the purchase until the software stopped working.If you can use your motherboard's software to control the RGB you might have better luck since motherboard manufacturers usually have better software than this.

I bought 2 packs of these as I needed 3 fans each for 2 identical gaming PC builds. They were for me and my son’s first gaming PCs. I used ThermalTake Core G21 cases which only had 1 exhaust fan in the rear of the case. The cases supported 2 140 mm front intakes and a 140 mm top exhaust so this 3 pack was exactly what i needed. Our Asus ROG Strix B350 motherboards have Asus Aura RGB sync and these fans work with it so i had no need for the included RGB controllers. The fans are quiet and run at low RPMs due to their increased size. I think these are a great option considering what is included for the price. Depending on how many RGB headers are on your motherboard, you may need RGB splitters as well.

RGB controller is easy to set up. SDK allows for custom rgb coding. 1 of the fans has vibration noise.

I got those fans for 50 dollars. They work really good

色がきれいに再現される。静音性が高い。十分な送風量。が気に入った点です。少々、値段が高いのが星－1の理由です。

Un poco caros y para ser de 140 no se siente mucho flujo de aire, aunque por otro lado las temperaturas en general siempre van de 30 a 35 en reposo

don't no if it just the package of 3 140mm fans i got but all 3 make nose's and vibrates. (and its only at 900 rpm) i don't even see this on $2 fans let alone $80 fans. as for the color looks good imo maybe an option to cover up the center hub with a sticker.the controller uses tiny connectors that are designed to brake.the feel is like an generic brand not a house hold name brand like cooler master.