Art3d Slat Wall Panel, 3D Fluted Textured Panel 12-Tile 19.7 x 19.7in. - Black

Swapped these underneath our standard drop ceiling tiles and what a difference it made! We took one of them to a local paint store and had them color match so we painted the grid before installing. It's very important to save your old tiles to lay on top of these so they don't bend if you have to cut them. Super easy to cut and ultra lightweight. Easily got LED lights in them after drilling small holes for the LEDs.Extremely high quality and well worth the cost!

Love how these turned out. Originally I wanted full panels as I didn't like the spacing every square with these, then I saw pictures in the reviews of someone alternating the direction of each square, and loved that idea. I will say they are not easy to cut, but easy to drill/poke holes in. I have part of my wall left to do since we need a mini table saw to cut them. They're too fragile for a regular saw, but too thick to cleanly cut without a saw. If it's something that can have a messy cut, like an outlet hole thay will get covered up, it's doable, but otherwise you need something else. Either way I wouldn't change it since they're really the perfect thickness to be light enough for mounting tape, and thick enough to look good. I did my entry way wall in a couple of hours independently, and for $180 it looks great (and we have some panels left over for somewhere else).

Absolutely loved it, changed my wallpaper completely. Don’t forget to buy the tape for it as this is not a self adhesive. The double sided tape that is recommended is perfect. Super durable and thick, it was easy to apply and cleans easily.

the first review question is asking is how they adhere. First they don't come pre impregnanted with adhesive material so adhesion is irrelevant and I gave 1 star because I cannot give 0 stars. Easy install yes its easy I used 100% silicone clear. I went every other rib on the back side and it worked when I pressed it against the wall I help then agains the wall for a few making sure the the silicone compressed and pulled it against the wall. My only gripe is the eyes of the panels are not made to but up with each other they are meat to slight overalap I think. in any case that's what gave me a decently uniform look. As my walls are not perfectly flat as many walls are not th edges in some cases needed more glue to adhere correctly I only glued the back side noting on th exterior font side. Light weight - yes the panels are light weight. I had to trip a couple triceps for the light switch fixture and the to needing a full sheet to complete my run. I used a oscillation tool to do so.

I purchased 4 sets of panels for our office space at our WeWork building. Because it is a temporary space, we can't make marks in walls and our specific office has a cinderblock wall and concrete. It was hideous and everyone thought we were in a dungeon or basement for zoom calls. First I tried the application with the Elmer's putty which was great for a while, bit I didn't clean off the cinderblocks before and there was a lot of dust and I think that.is why they fell down. So, after that, I went ahead and got a hot glue gun and used it and it was amazing. A few burned fingers and a headache and voila! It totally transformed the space and it looks so much better. I think they should pay us because it was terrible before.There are two cool things that happenrd that i want to share, specifically.1) I cut very small cuts at the bottom and top of a few of the pieces and I was able to enclose the ethernet cable, hdmi and the TV power cord through the raised portions of the panels. Super cool, unintended thing there.2) we had this polished concrete wall with a curve in the right side of the room and I never thought about applying the panels around a curve and it looks soppy great in person.A few pointers:- this can be cut but get some serious scissors bc using regular crafting scissors took forever.- the hot glue will cause it to bubble if you get too much on it, too thick so just be careful bc the heat causes it to melt.- go ahead and get the big hot glue gun and large gluesticks. You'll be glad you did. I used an entire bag of large gluesticks, 8 CT, on this project.-as far as estimating, the images were 4 boxes, but I had some overlapping when I did the curves and there is a bit of a learning curve on cutting in.Overall, this is a fantastic project and i had a lot of fun and it totally transformed our space. 5 stars!!

So, I bought several packs of these thinking I could make a nice entry way to my basement home theater. I thought they'd be an easy and neat way to create an interesting vibe as you went downstairs. I was sorely mistaken and this is my warning to others. So, these are very thin. I had trouble getting them straight and cutting them as a massive struggle. I had to buy double sided tape on the side and when it was all said and done...it was falling of the wall. It didn't look good. I thought about trying to cover it with some self adhesive wallpaper and even that was just going to be a pit of it's own. So I ended up removing them. Of course, half the wall got ripped off by the double sided tape. So, a lot of time, effort, wall spackle, paint, and money later, and the wall is back to normal...and I am still without my cool entry way. So, this was a few hundred bucks just flushed down the toilet. So, make sure you really think about this before getting into this project. There's a reason you're looking at this and not just buying paint like I should have done.

love these! they are a little hard to cut. i don’t recommend regular scissors. that’s what i used and they cracked in a few places. i’m going to buy a box cutter or something to finish the wall. like another commenter said i just used double sided tape and they are staying up just fine. they are really light.these really make my living room look great already and it’s not even finished yet. loveeeeee x100000000 !!