46.2 SF White Large PVC 3D Wall Panels for Interior Wall Décor,3D Textured Wavy Wall Panels Decorative, Pack of 6 Tiles(47.2"×23.6")

I think I did pretty good!! I had absolutely no problems putting it up. The recommended double sided tape sticks like concrete, you only really need like 1” strips on each corner. Highly recommend. S/n The first package they sent me only had 3 pieces in it but I was about to return it and they had a replacement here the next day.

I bought these textured 3D wall panels after being inspired by an Instagram post and envisioned them enhancing my office space. Surprisingly, I ended up with 6 extra tiles and wasn't sure what to do with them. The photos in this review show how I creatively utilized these leftovers to fix an imperfection in a bedroom door. (I still haven’t had a chance to finish my new office space so I’m not able to show photos of how that turned out yet.) During renovations, I accidentally damaged the door, creating a hole that was difficult to patch up. Initially, I considered covering it with a mirror or poster, but I wanted something less tacky. I toyed with the idea of using a vinyl wrap or wallpaper, but then it hit me – why not use the spare 3D wall panels? I painted the white panels a dark gray to match my door, and the results were better than I expected. It's a unique solution that saved me from buying a new door. While the panels don't exactly match the rom’s aesthetic, people I’ve shown the photos too thought it looked cool… so I'm keeping it for now. I'm thrilled with how easy it was to glue (construction adhesive) and paint the panels, and I love the final look. If you choose to paint these, I’d recommend using a paint sprayer, if you have one or can get a hold of one. These 3D wall panels turned out to be a versatile and stylish fix for my home improvement dilemma.

Loved these for the accent wall in my basement. I added trim to all 4 sides of the wall to help frame it in and I think it turned out great. Easy to cut the panels with a good pair of scissors. I used a tube of clear gorilla glue with a caulk gun. It was nice that I could move them into place if I didn’t get them into the perfect spot immediately. But it was a little hard to hold them in place long enough for the glue to partially set. They tended to slide down with gravity. I wanted to start from the top because I wanted the cuts to be near the floor because that’s where seals/chairs will be but if you start at the bottom then work your way straight up, the panel underneath will prevent slippage. And use a paper towel to rub the edges against the wall and that wipes away access glue. But because the panels are PVC it’s easy to run the glue off after it dries. Using my hands to hold/push the panels in place, I got some glue on the panels but clean up was pretty easy. Also, I rotated each panel 90 degrees so the geometry looked more random then having an actual pattern to it like you see in most of the product images. (My ceiling is not finished, just sprayed black)

I remodeled a guest bedroom and wanted to put in a floating wall with a TV and fireplace. I originally though about doing this wall with a dry stack stone, but it was cost prohibitive and would be messy and time consuming. I'm glad that I went with these 3D panels instead. Everyone who has seen them has been wowed by them. I built the floating wall using 3-1/2" steel studs and covered it in 1/2" OSB. I primed it with white Kilz (so that any gaps in the panels would not be as noticeable) and used double sided carpet tape to adhere the tiles. The tiles look fantastic! If you are going to build a floating wall, I would suggest that you build it to the same dimensions as the number of tiles you plan to use (width and height). I don't think you could find a way to make a cut edge look finished, unless it butts up against and adjoining wall. To cover the edge of the OSB (plywood) I used the plastic drywall finishing edge from the local Big Box hardware store (see the second picture). I left approximately 4 inches of overhang on all sides and mounted these chasing LED's from Amazon https://www.amazon.com/gp/product/B07M9XHYVB/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 in these angled channels https://www.amazon.com/gp/product/B01LL3S006/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The TV mount and fireplace are also from Amazon. When building the steel stud wall, I internally braced the TV mount location with wood 2x4" and ran a power cord to that area. I used a table saw to cut the panels for the bottom row, but I could have used a handsaw or really good scissors. These panels are a decent thickness and not flimsy at all. There are microscopic gaps between the panels, but they are only noticeable close up. If you are concerned about the gaps, I would suggest that you mount the panels, then fill the gaps and paint the panels with a paint suitable for plastic. BTW, the electric fireplace puts off quite a bit of heat (mostly forward and up) and it has not affected the tiles at all.

These are so amazing, the design is did in my bathroom and my daughter laundry room is so beautiful, the 3D affects are awesome everyone who has came to our home absolutely love this and plans on ordering some also, the only thisbis I wish they came with self adhesive tape on them ,it would make it very easy to place and much faster.

I love it I wish I got a different color...ima just spray Paint it when I decide to change colors .im not done yet just ideal...Will post finish results...please please use liquid nails made the job ez

A quick easy upgrade to any space complexity transformed the area with the Art3d 12 Pack 3D Diamond Design Wall Panels. A small pack went a long way durable nice color and adhesives!

The panels were used as a back drop for a TV wall entertainment center. We used double stick tape, clear also purchased on Amazon. We painted the panels first and then mounted. Tape was used mostly on the sides to make sure the panels lined up and stayed flush with each other. We used a Dremel with a saw blade to cut the panels which gave us a remarkably straight cut. The side strips are metal floor transition strips purchased at Home Depot and the panels cut end slipped perfectly into them. After the panels were mounted, the small lines between them were filled in with spackle which worked well and easy to work with and clean up. After the spackle dried we touch up painted them and the lines could not be seen and it looks like one large panel. I am not sure why they made them 19.7 inches instead of 20 inches. It made measuring a little more complicated but all in all it looks great. I recommend using flat paint if you are painting.

Los paneles 3D de Art3d me han sorprendido muchísimo por su calidad y acabado. El diseño en forma de diamante queda increíble una vez instalado: aporta profundidad, luz y un estilo moderno que cambia por completo la habitación. El material de PVC rígido es justo lo que esperaba: se nota firme, no se dobla, no se marca y mantiene la forma incluso durante la instalación. Además, cada panel viene perfectamente cortado y encaja muy bien con los demás, así que el resultado final se ve limpio y profesional. La instalación ha sido sencilla. Con cinta adhesiva fuerte o pegamento de montaje quedan perfectamente fijados, y al ser tan ligeros no dan problemas al colocarlos. También se pueden pintar sin dificultad si quieres personalizar el color.

Cheap material but gets the job done if you’re on a budget

El producto físicamente no es como en las imágenes, lo que me orilló a devolverlo; sin embargo, solo me hicieron una devolución parcial, dado que el proveedor no reporta la recepción del producto en su totalidad, pero DHL reportó que sí entregó todo completo.

Made of plastic the texture is really impressive. Looks great on the wall

Pannelli che si applicano facilmente, basta acquistare una colla/silicone di buona qualità, belli da vedere: effetto visivo spettacolare se illuminati da faretti multi direzionali come ho fatto io. Unica nota negativa la scarsa disponibilità, soprattutto di quelli bianchi. Art3d ottimo fornitore.