Senninger Pressure Regulator 25 PSI 3/4" Hose Thread Drip Irrigation Pressure Reducer Low Flow Valve - Landscape Grade High Performance White

Works great. The water pressure coming off my meter and into my sprinkler system is about 110 psi. This is too much for the drip system in my garden. So, using this pressure regulator was essential. It's simply works! It reduces the pressure down from about 110 to 25 PSI.

I have a several of these and they are well built and work great. Easy to install on a irrigation coupling using a 3/4" to 1/2" Irrigation System / Faucet Hose Adapter fitting. I had an initial concern about the minimum stated flow rate of 1/2 gallons per minute as I have a couple circuits with only seven 2-gal per hour emitters, which equates to about 1/4 gallons per minute, or half the stated min. I checked the Senninger and got a response that they would still reduce the pressure but may vary 3 or 4 PSI higher or lower than the 25 PSI target depending upon the input pressure; certainly a livable tolerance for my needs. Bottom line is they still work OK and I have had no issues with emitter failure or excessive drip rates. They might cost a little more but are a good value.

EXCELLENT PRODUCT! HIGHLY RECOMMENDED.

Worked really well

I installed a drip system for my garden and actually didn't realize that I needed to maintain a pressure of 25 PSI so that I would get the best performance. My water is hooked up through a hose and the water pressure at the end of my hose is 45 PSI - too high for my drip irrigation. All I had to do was put this in line to my battery-operated B-Hyve which I use to control when and how long to run the drip system. Seems to have done the job. I have NOT had any leaks so far this season and making it inline made it easier to use.

Compact pressure regulator that does the job!

So far so good. Pressure regulator seems to be working as intended. I have very high psi and my drip irrigation system needs a regulator.

The regulator works well. The issue I had was the black end- where the source of the water attaches- doesn't seem to be as sturdy ass the white end. The threads easily buggered up, so now I can't get the hose to screw in far enough to get a good seal. Water leaks out that end. Seems that end should be the strongest since the regulator is limiting flow it needs to be tight to prevent backflow

Be aware that the output is US hose connector pitch. Buy it Direct does an adapter for US to UK threads for graining American Hot tubs.

Friert nicht so schnell kaputt

Save your time and frustration; do not buy the cheap ones with holes (they leak out of holes and don't work). This is the one you want to connect to your programmable outdoor hose water faucet.The cheap ones do not manage the water flow properly and drowned my potted plants, these on the other hand, work perfectly and plants are getting proper water distribution again.

Bought this item from Karazone. Product works well and they provide good service with timely delivery....Thanks, seller.

Increíble que no puedas encontrar algo tan sencillo como un regulador de presión en Home Depot.Este regulador lo uso para riego por goteo junto con un B-hyve Temporizador de Grifo ya que mi casa cuenta con presión alta y eso ocasionaba que la unión de las mangueras y el aspersor se desconectaran. Con esto solucioné el problema.