GT Omega Classic Wheel Stand - GT Omega Steering Wheel Stand for Logitech Steering Wheel G923, Logitech G29, Logitech G920 with V2 Shifter Mounts PS4 Xbox Fanatec - Sim Racing Wheel Stand

I've been sim racing for years with my wheel clamped to my desk and pedals underneath due to having limited space in my room and thought that was ok but after breaking my 2nd table clamp for my t300 i looked into getting something sturdier but without taking up too much space. I found this and I wish I had bought it sooner. Really stable, easy to setup and put away, great compatibility and options to upgrade later down the line. Would definitely recommend for anyone that was like me, racing on a table because they were limited on space.Would also like to mention, i have a set of CSL elite pedals with the LC pedal and while the website didn't say if they were supported I can confirm to anyone that they are. You need to move the pedal bracket as far back from you as possible and then the 2 oval shaped holes near the front line up with the feet of the CSL elites to screw in M8 bolts (you have to buy these seperately as neither fanatec or GT omega include any). I haven't screwed in the individual pedals but the setup seems stable enough as it is with no sliding or lifting under heavy braking.

I received it yesterday and it does the job perfectly. It can get a little fiddly trying to assemble it and put your wheel and pedals on. Being a bigger guy I found that the gearstick mount can get in the way of your leg on whatever side you have it mounted. All in all very sturdy but the folding down mechanism is a easy as I makes out as you need to remove bolts each time.

After a couple of months of struggling to play Project Cars 2 and GT Sport with a PS4 Pro controller I bit the bullet and purchased a Thrustmaster T300 Wheel and pedal set up. However, I was faced with the problem of how I use it when seated on the sofa in front of the TV in the lounge, so I opted for the GT Omega steering wheel and pedal stand.I have to say it really is a substantial piece of kit, strong, sturdy and weighty. Because the GT Omega is pre assembled in the main, the only thing needing fitting are the adjustment knobs and feet, then it’s onto installing the wheel and pedal. Attaching the Thrustmaster T300 wheel is no problem as the pre drilled holes line up perfectly. When fitting the T300 pedals I found the pre drilled holes a little to close and also to central, so I used the slider bar attachment and got every thing just where I wanted it. The complete set up has really made a difference to driving Project Cars 2. I just need to mod the brake pedal on the T300 so that it acts a feels like a brake pedal.If I had the space I would go the whole way and add the racing seat from GT Omega. The stand is well designed and well made and worth it.

Been struggling with a fold up table for ages with my wheel and after playing Driveclub one day and the table wobbling all over the place I decided to take the plunge. I really wish I'd done so sooner. The stand is very sturdy and is great with no obstruction to the pedals like cheaper stands. With the option to upgrade this over time into a full racing pod as omega sell all their components separately it could be something I look into in the future. For now though I'm more than happy with this stand. Easy to assemble plus I can leave all my peddles and wheel attached as the stand folds down nicely allowing me to store in my cupboard when not in use. If you're thinking of getting a stand I can highly recommend this one.

i wish you could pick 0 stars

After spending a moderate amount of hours using this stand I can say that this is it. Putting it together is really easy, dedicated mounting points are exactly where they should be and everything I needed was included in the box. I found it extremely comfortable to use. The stand is built like a brick wall. Once You put it together and set it up to your preference it will stay like this and won't move even if You really push your racing to the limits. Worth the money, it's a great upgrade for anybody using cheap universal stands and a great way to start if You just bought a steering wheel and look for a quality wheel stand.

Good piece of kit ...Pros:More stable than the folding lawn table I used before.Heavy but it helps with the stability.Easy to put away.Cons:If the paint didn't scratch easily it would have gotten 5 starsNo instructions in the box but it isnt rocket scince

Great piece of kit, sturdy and solid, all holes matched my Thrustmaster T300RS wheel and pedal set. Easy to assemble, solid and weighty enough, without being too heavy to put away. Nice not to have an annoying centre bar getting in the way as well, unlike many other stands. Fits perfectly up to the armchair so I am able to drive in comfort! If you're not sure whether this piece of kit is right for you, take a chance and go for it!Best piece of kit I've bought for my PS4!

Hatte vorher einen Wheelstand Pro, dieses Setup dann aber komplett verkauft, nun wollte ich wieder damit anfangen und habe mich, da ich mich unglaublich mit dem Wheelstand rumgeärgert habe, für den GT Omega Stand entschieden, per DHL geliefert, ausgepackt, alles nötige angeschraubt, fertig, alles lief binnen 20 Minuten, im Gegensatz zum Wheelstand, wo die Pedale anschrauben eine reine Tortur ist, ist das Ganze beim GT Omega sehr simpel, da hinter dem Ständer genug Platz ist, um meine Hände drunter zu bekommen, somit war das anschrauben super einfach.Zur not kann auch der halter der pedale nach oben geschoben werden, 2 Schrauben ab, anheben, wieder anschrauben, dann hat man genug platz (habe das ganze auch genutzt, um meine Pedale eine stufe tiefer zu machen!), man hat mit diesem System insgesamt 6 Stufen, wie hoch/schräg die Pedale stehen sollen.Es gibt 2 Wege den Schalter anzubauen, welche auch gleichzeitig(!) angebracht werden können, z.b. für Handbremse und Schalter, ich persönlich habe den Schalter so angebracht, dass er quasi genau neben meinem knie ist, leider kann man den Schalter nicht weiter nach vorne schieben, womit er fast etwas zu nah an meinem Körper ist, konnte das ganze Etwas verbessern, indem ich, anstelle von schrauben, den normalen Table Mount vom Shifter benutzt habe, und diesen so weit es geht nach rechts geschoben habe, nervt aber beim Fahren wenig.Um das Lenkrad abzubauen würde ich erst empfehlen den Rim zu entfernen, falls möglich, um das Gewicht etwas zu balancieren, danach ist man aber 2 schrauben davon entfernt das ganze anzubauen, Schräglage kann mit 2 Bolzen geändert werden.Leider wurde für das Kabelmanagement nicht viel gemacht, du bekommst bei der Lieferung 2-3 schlingen, womit du sie am Rig selbst halten kannst, aber eigene spuren gibt es nicht.Ich persönlich habe, um den Kabelsalat etwas einzugrenzen, ein USB Hub genommen, welche ich dann nur noch in den PC Stecken muss, das ist um einiges einfacher, als jedes Kabel einzeln zu suchen und einzustecken.'Da ich den Rig nie einklappen muss, kann ich nicht sagen, ob er kompakt ist, zu notieren ist aber, dass, falls der Shifter Mount, welcher unten in den Wheelstand geschoben wird, genutzt wird, dass der Wheelstand NICHT einklappbar ist, mit einem seitlichen Shifter Mount geht das ganze aber.Zu der Zuverlässigkeit kann ich bis jetzt noch nichts sagen, da aber alles mit dicken Schrauben angebracht wurde, sieht es sehr stabil aus, und fühlt sich auch so an, etwas wacklig, wenn man dran rüttelt, der Rig ist aber um einiges stabiler als ein Wheelstand Pro.Wer sich die Ausmaße des Wheelstands angeschaut hat, wird sicher gesehen haben, dass dieser 12kg wiegen soll, ich persönlich würde ihn also nicht immer wieder von Raum zu Raum schleppen, schnell aus dem Weg geschoben ist er aber.Andere Mängel:Ich hätte mir gern gewünscht, etwas mehr dämpfung in den Shifter Mount zu haben, da dieser ganz schön wackelt, wenn man mit etwas mehr "liebe" schaltet, das fühlt man dann auch an den Füßen, da es den gesamten rig zum wackeln bringt.Ebenfalls würde ich den Shifter etwas weiter rechts montieren, da ich bei mir konstant mit dem Stuhl gegen den Halter des Shifters stoße, das ist aber auch teilweise ein Problem meines Stuhls, da dieser ein normaler Bürosessel mit rollen ist, Rollen, welche man sperren kann, sind hier empfehlenswert.Um ehrlich zu sein würde ich dem ganzen keine vollen 5 Sterne geben, es gibt noch eine menge Verbesserungspotential (z.b. einen "knick" in den Shifter Mount zu machen, damit er etwas weiter rechts ist, und diesen weiter nach hinten gehen lassen), aber ich denke für 120€ ist dieser Mount sehr gut, daher gebe ich dem ganzen 4.5 Sterne, aufgerundet auf 5, da Amazon keine halben Sterne erlaubt.

Simplemente de 10. Bien hecho, bien embalado, materiales buenos, detalles 100 Ajustable, sólido, no pesa mucho, muy contento. Por 95€ muy buena calidad precio. Además trae soportes para palanca y otra para freno, etc... Casi montado y 100% compatible con logi 920. Recomendado

solido cone na roccia facile da montare con tutti i buchi possibili per tutti i volanti in comercio che permettono l'aggancio ad esso unica cosa un po ballerino con il cambio th8a trustmaster montato alcune volte muovendo il cambio si muove la struttura e mi falsa liserimento delle marce ma risolto con il montaggip della parte optionale verticale che la reso un chiodo e anche con le cambiate cattive non si muove piu complimenti gt omega

Je suis très content de mon achat qui a été livré très rapidement en 3 jours.C'est un support robuste et de qualité.Je l'ai acheté pour y fixer un Thrusmaster T300RS.Seuls 2 vis permettent de le fixer et la bordure du volant qui sert a le caler sur un bureau n'est pas en contact avec la plaque du support mais les 2 vis bien serrés permettent cependant de le fixer sans qu'il ne bouge. Des trous houblon un peu plus grand aurait pu régler ce problème.

I'm using a Thrustmaster T150 with this GT Omega Steering Wheel stand. I was trying to find some good information about this stand before I purchased it but information was sparse. I'll tell you what you need to know if you are using Thrustmaster T150.The pedals that come with the T150 can be mounted with the screws that come with this wheel stand. There are 2 holes about 10" from the bottom of the stand that will line up perfectly to attack your pedals. Look at the pictures I have provided and you will see that the pedals are bolted from the bottom. You do not have to use the bar that locks them in place.The steering wheel has to be clamped on to the steering wheel table. I was hoping I would be able to bolt it down but it's not possible. The good news is that the clamp works great. When the steering wheel was on my desk the clamp had issues, now that it is clamped onto the steering wheel stand it is as stable as can be.They don't tell you this on Amazon but GT Omega sends you 2 free gear shifter mounts along with your wheel stand. If you go on their website they are advertising the 2 free gear-shifter stands, but on Amazon there is no word about it. I will definitely be getting a shifter at some point so I'm glad these were included.The stand itself is awesome. I already had a $400.00 racing seat so I just needed a good stand to attach my wheel and pedals. I looked at the Wheel Stand Pro before I found this one by GT Omega. The Wheel Stand Pro that fit my wheel, the mid-range T150, is $179.95 and then they want $23 dollars for shipping. That is over 200 dollars for a simple wheel stand. Also the Wheel Stand Pro has the bar in the middle that just seems wrong. The GT Omega is open and with 2 braces give you better stability.The GT Omega Wheel stand didn't come with any directions but you can just look at the box if you need to. It is almost put-together when you pull it out of the box. The wheel stand is sturdy. I didn't think it would be as sturdy as my solid wood desk but somehow it is.I'm using this wheel to play Project Cars with my Oculus Rift and it is mind blowing!!!!