E1 Max Electric Screwdriver, 53-in-1 Screwdriver for DIY (Grey)

I have done a few quick tests to see if this is up to my expectations, and wow it it exceed them. Its powerful, compact, has extended bits, and has a very quality feel. I was worried that the bits would not be long enough, its been a problem I have run into even with expensive 100+ piece kits the thin extended bits that this comes with are going to be lifesavers no doubt. I did a quick test disassembling a GameCube controller, it had the tri tip bit I needed and unscrewed everything under its own power. I also tested some flatheads on light sockets, no problem. it put them back tighter than they were by hand lol. honestly this this is a STEAL for 50$ I had my eyes on a cheaper one for a while but I'm SO glad I went with this instead. I likely wouldn't have bought this at full price, but its a no brainer discounted. I only have a few small criticisms. because this thing is nearly perfect. my biggest issue is repairabilty, its why I got this in the first place. I work on LOTS electronics and gagets and 3d printers so being able to do something like replace the battery in the future would be a feature if it was truely perfect. I just remembered that it did my p1s hotend screws with a little effort, which was very nice, no more Allen keys! its possible that the aluminum tube chassis is removable, maybe it needs heat idk. its a problem for the future I guess. the only other thing I would change is really that I'd like more of these extended bits. They are just super nice and I'd like more sizes. oh if it had a bit of grip to it and maybe some texture on the buttons too, they can be a bit hard to find if you can't see. I did test some of my bits from another kit, some of them fit a bit too snug others for fine. none that wouldn't go in, but I had to wiggle them out. I included a video of trying to stop it by hand and it was pretty difficult. it really does have good torque. basically impossible to stop without a little more leverage (high torque setting in the video). I had held off on these for ages, as I had an "electric screwdriver" like 10-15 years ago that was so awful and thought they were all too weak and bulky to be useful. I expected this compact one to have so little torque it would be useless, the opposite is true it has plenty. it unironically has more torque than my brushed "electric screwdriver" I had ages ago, this was about 2.5in dia and 10in tall lol. the tech is there now, and the price is right. I've never jumped to give something a glowing review this fast before.

The Fanttik E1 Max Electric Screwdriver is a great little tool, especially for detailed work like electronics assembly, computer repairs, or even simple tasks like installing light switch covers. It comes with 50 bits across 12 types, so you’ll almost always have the right one on hand. Everything fits neatly into a compact, well-designed case that magnetically holds the handle and bits, making storage and access really convenient. Some people mention that it’s not powerful enough, but that usually comes down to how it’s being used. For best results, you should first loosen the screw slightly by hand, then let the powered function do the rest. When tightening, do the reverse—use the screwdriver to get it in place, then finish by hand. Once you use it this way, you’ll notice it actually delivers impressive torque for its size. Overall, it’s a handy and reliable tool that’s well worth having around.

This electric screwdriver set is extremely convenient for anyone doing electronics repair or precision work. The compact size makes it easy to handle, and the electric torque is just right for small screws without stripping or damaging them. The 50 magnetic bits are well organized in the storage case, and having everything neatly stored makes it easy to find the right bit quickly. The magnetization helps keep screws in place, which is especially useful when working on small devices like laptops or phones. Battery life has been solid so far, lasting through multiple repair sessions before needing a recharge. The controls are simple, and switching between forward and reverse is quick and intuitive. Overall, this is a well-designed and reliable tool kit that feels premium for its size. It’s a great upgrade for anyone who regularly works on electronics or wants a cleaner, faster way to handle small repairs.

Pros: The battery lasts a good while. It has plenty of torque for most small electronics devices. I use it at work to repair Chromebooks and laptops. It has plenty of torque to remove screws, and just enough not to over torque screws when putting them back in. Chrome book bottom covers tend to crack if you over torque the screws. The magnetization on the bits are great for tiny screws. You don't loose them after they come out as easy, and putting them back is so much faster with a magnetized screwdriver bit. This case has a spot to magnetize and demagnetize the tips. This is probably my 3rd or 4th power mini screwdriver and so far I like it the best. It out preforms all others I've tried. Also it all fits in the tiny little aluminum container. The bits are kept on via magnets too, so they are easier to take off and put back away after use. None of those plastic sleeves that you need pliers to remove the bits. Cons: The whole case is aluminum, and the bits are held on with magnets. You need to watch out what you set it down next to. The magnets will erase magnetic strips on credit cards, and hotel room door key cards. If you set it down next to a laptop, it could trigger the monitor shut off, or hibernation feature on your laptop or chrome book. The screwdriver will not slide out unless you press on the outer edges to release the whole thing. This is great when carrying it, but if you want to just use the screwdriver and not the bits for a flashlight, or anything else, you have to be careful pulling it out. Also, be careful taking it out because if you turn it over and let gravity take it out, the bits will let go of the magnets and go everywhere. Just try not to drop it when it's open. One last gotcha, it has a magnetizer on it, but it doesn't work at all. I had to use my own magnetizer.

⭐⭐⭐⭐⭐ Very impressed with this compact screwdriver set. The quality feels premium, the bits are well organized, and it works perfectly for small electronics repairs and detailed projects. A very useful tool to have at home or in the workshop. Great value and highly recommended!

Additional Edit: The company sent me their larger, but still conveniently small drill to test. It was hands down the best non-pro drill I have used. I will be creating a review for it, but this company has some GREAT customer service! EDIT: Upon review, I believe the mistake is mine. The description I see today is as below: " Ideal for tablet computers, mobile phones, watches, electronic bracelets, cameras, precision instruments, etc." Which does NOT list Personal Computers, who have much larger screws and are much more difficult to get out. In fact, the device states it is for work with delicate electronics, and I would definitely not place the PC's I work on as delicate. On top of that, the company contacted me almost immediately and responded to my problems, offering to replace the screwdriver at no additional cost. I believe that type of commitment is worth its weight in gold. Please note the company did NOT ask for a positive review in exchange for a newer product. As such, I have edited my review from the original to be more accurate. PROs - This is a neat unit and design idea. It got a lot of compliments. - Battery life is good, I tended to just leave it on the charger overnight when it ran down. It then went for weeks of intermittent or 2-3 days of frequent use. A day or just under for (my) constant use. - Materials are quality. It feels good, bits are solid. - The storage and bit choice is excellent. There are a lot of different bits and several tools in the case. My old sausage fingers found them relatively easy to pop in and out. Bit storage slides easily in and out of the case. I dropped it once or twice and a few bits fell out but most remained in the case. CONS - The only real CON is easily solved with a small carry bag or case. I forget if they come with one, but make sure you keep it if they do. The screwdriver pops out of the case , but if you free carry this, it can pop out if brushed up against and disappear between some car seats [for a totally random example]. Again, easily user-solvable, but something to be aware of. I kept my work tool in the box it came in. The only other possible con is that it is not magnetic, so putting screws in can be tricky. That being said, you don't always want to have a magnetic screwdriver around some electronics, so it's not really a negative. I would suggest an upsell of some magnetized tips for glasses or small craft work. OVERALL Like I stated, a great company, obviously looking to protect their brand by actually helping customers and attempting to solve their problems. I'd recommend buying whatever you're interesting in from these guys. Work with them if it's not meeting your need.

If you're searching for a versatile and handy electric screwdriver, look no further than the Fanttik E1 Max 3.7V Mini Electric Screwdriver. This precision tool boasts a sleek design and a range of features that make it a must-have addition to any toolbox. First and foremost, the compact size of the Fanttik E1 Max makes it incredibly convenient to use. Whether you're assembling kids' toys at Christmas or tackling DIY projects around the house, this electric screwdriver is up to the task. Its small size allows for precise maneuvering in tight spaces, making even the trickiest of jobs a breeze. One of the standout features of the Fanttik E1 Max is its 50-in-1 magnetic bits, which cover a wide range of screw types and sizes. With this comprehensive set of bits included, you'll never find yourself scrambling to locate the right tool for the job. Everything you need is conveniently stored in one place, saving you time and frustration. Furthermore, the Fanttik E1 Max is not only practical but also aesthetically pleasing. Its sleek design and compact form factor make it a joy to use, while its efficient storage system ensures that your workspace remains clutter-free. As someone who frequently relies on their tools, I can confidently say that the Fanttik E1 Max has become my go-to screwdriver set. Its reliability and convenience make it an indispensable addition to my toolkit, and I find myself reaching for it time and time again. Additionally, its versatility makes it an excellent gift choice for any occasion. Whether it's Christmas, a birthday, or Father's Day, the Fanttik E1 Max is sure to be appreciated by anyone who receives it. And if the y come out with a pink version, I will buy another one as mom's gift. In conclusion, the Fanttik E1 Max 3.7V Mini Electric Screwdriver is a standout product that delivers on both performance and convenience. Its compact size, comprehensive bit set, and sleek design make it a joy to use for a wide range of tasks. Whether you're a DIY enthusiast or simply someone who appreciates well-designed tools, the Fanttik E1 Max is sure to impress.

Comes in handy when needed. Battery life is great, little bit of retention but in my opinion still worth it for little things.

Ich bin absolut begeistert von diesem Präzisions-Schraubendreher-Set. Die Verarbeitung ist hochwertig, der elektrische Schraubendreher liegt perfekt in der Hand und die zwei Drehmomentstufen sind für feine Arbeiten ideal. Die magnetischen Bits halten sicher und die große Auswahl deckt nahezu jede Reparatur ab – egal ob Smartphone, Laptop, Brille oder Uhr. Besonders gefällt mir das kompakte und elegante Aufbewahrungsetui, in dem alles ordentlich verstaut ist. Der Akku hält lange und macht das Arbeiten deutlich komfortabler als mit einem normalen Schraubendreher. Für Hobbybastler und Technikfans eine klare Kaufempfehlung – das Set ist jeden Cent wert!

I had to pick this up after my previous precision screwdriver from another brand wouldn't charge. Right out of the box, this one feels solid and well-made. No issues with charging for this Fanttik, and it seems to have plenty of power for lighter tasks. I'm really looking forward to putting it to use on my upcoming small DIY projects and electronics repairs! My first few uses have gone by really well. The click in and out of the case is satisfyingly fun.

Wow what an awesome driver. I bought it for my Axial SCX 6 Jeep and with all the different drivers I have plenty that fit. Enough power to unscrew and screw up. Good torx power. Magnetic adition works good. Batter lasts awhile and charges quick. Made with quality aluminium and feels good.

スタイリッシュで機能も最高使いやすい

Les Plus : • superbe finition • rangement astucieux et surtout pratique • taille et ergonomie du tournevis idéales • 2 modes de fonctionnement (+ de couple ou + de vitesse) très bien calibrés • chargement relativement rapide (avec une brique 25W non fournie) • pléthore d'embouts pour toutes les applications, très costauds en plus ! • autonomie suffisante Les moins : • la loupiote anecdotique au mieux car insuffisante • Pas de chargeur livré avec Conclusion : vraiment d'une qualité surprenante à tous les niveaux. Très complet question des embouts livrés qui sont eux même d'une excellente qualité, mais attention à toujours débloquer une vis à la main avant dévissage sinon on peut très facilement ruiner une empreinte tant ces embouts sont durs. Pas trop grave pour l'absence de brique de charge, dans la mesure où de nos jours on en a tous quelques unes qui trainent à la maison, en revanche la petite LED à l'avant aurait pu être une bonne idée, mais malheureusement elle est bien trop insuffisante pour être d'une quelconque efficacité, dommage. Pour le reste je recommande à 100% !