ARCTIC MX-6 (8 g) - Ultimate Performance Thermal Paste for CPU, Consoles, Graphics Cards, laptops, Very high Thermal Conductivity, Long Durability, Non-Conductive

Best product I have used for keeping CPU and GPU cool. Replaced factory AMD thermal great with this. The performance gain was immediate due to better cooling. Would buy again!

Great thermal paste. Easy to apply and spreads well. I used it on my CPU and immediately noticed better temperatures and stable performance. Very good quality for the price. Highly recommend.

Easy to spread, and temps are always perfect. It's also got a certain stickiness to it so when it does spill over if on accident, it sticks super well to paper towel or qtips. So far temps are running good on my cpu that runs hot - Ryzen 7 5800XT. DO BUY

I picked up the ARCTIC MX-6 (8g) to repaste multiple CPUs and GPUs, and it did exactly what I wanted: solid thermal performance with a clean, low-stress application. The consistency is easy to work with, thick enough to stay put, but it spreads nicely once you mount the cooler, so you don’t have to fight it or worry about it running. ARCTIC also states it reaches peak performance right away (no “burn-in” period), which is a nice plus when you just want to build/repaste and be done. What I appreciate most is the safety factor: MX-6 is non-electrically conductive and non-capacitive, so there’s less anxiety if you’re not a pro at perfectly clean paste lines. It’s also positioned as a long-lasting option with anti-drying / anti-bleeding properties for consistent performance over time. Pros: Easy to apply/spread; no curing/burn-in needed Non-conductive + non-capacitive (safer for beginners) Works across CPUs/GPUs/consoles/laptops Cons: A little thicker than some pastes (not a “watery” spread) Bottom line: If you want a reliable, no-drama thermal paste for a build or repaste, MX-6 is an easy recommendation.

The products does exactly what it is made for. Cooled my MAC down …and I mean way down. The fans almost never kick on. I think this is the best paste I have used yet.

Does what it should do! Quality product for the price. My CPU temps paired with the ProArt 420 Liquid Cooler for the Intel i9 13900k is consistently between 32-37C. Previously, I used a Corsair H150i Capellix LCD XT 360mm AIO which kept temps between 32-58C. Since upgrading to ProArt 420 Liquid Cooler with Noctua's industrial 3000 rpm fans and new thermal, my machine runs like-new. So great. Love ARTIC MX-6 compared to Grizzly since it's cheaper too.

I’ve used MX-6 on a couple builds now, and it’s one of those products that just works without any drama. It’s not flashy, but it delivers solid, consistent results where it matters. The first thing you notice is how easy it is to apply. It’s a bit thicker than older pastes like MX-4, which actually helps with control—you don’t get it running everywhere, and it spreads nicely once pressure is applied. There’s no cure time either, so you get full performance right away. Cooling performance is strong for a non-premium paste. Temps dropped a few degrees compared to older or stock paste, and it holds up well under load. It’s especially good for everyday systems, gaming PCs, and even moderately overclocked setups without needing something extreme.

I needed a cpu upgrade for my computer so i need some thermal paste and I chose an 8 g tube of Arctic MX-6 so i would have extra on hand. Let me tell you for the price and size its a value. Its thickness and consistency for my cooler was spot on and the temps so far have been great. i upgraded from a 3800x to a 5800x and plan on using mx-6 for repasting my other computers as well since i got the 8 g tube

Rien à signaler. Fonctionne parfaitement, aucun soucis. Honnêtement, 8g de pâte thermique aussi bien pour ce prix, c'est donné.

Fajne ale troche cieszko sie smaruje

Soy un feliz cliente de la marca Artic, llevo años usando la mx-4 siendo una pasta térmica exelente que permanece en buen estado tras 2 o 3 años de haber sido aplicada, en el equipo con mejor duración de pasta térmica que eh tenido a sido una PC con 4 años desde que se aplico la pasta mx-4 y al hacer mantenimiento la pasta seguía con buena viscosidad,por lo que doy fe de que esta marca es de las mejores. Ahora bien está Mx-6 es un upgrade interesante ya que disminuye las temperaturas entre 4 a 7 grados respecto a la mx-4, dependerá de la refrigeración que uno tenga pero si es mejor conductora térmicamente hablado, es mucho más espesa y difícil de aplicar, por lo que recomiendo sumergir la jeringa con su tapa puesta en un vaso o recipiente con agua tibia unos 5 minutos para que así el contenido se suavice y sea más fácil aplicar y trabajar con el. Viniendo de la mx-4 teniendo esa grata experiencia de que es una solución de calidad y muy fiable, no me queda la menor duda de que está mx-6 me dará una experiencia similar. Ahora solo queda ver qué durabilidad obtendre de esta mx-6. Si tienen la posibilidad elijan la opción de 8g ya que es muy durable y siempre viene bien tener de sobra para hacer los mantenimientos o si tienen consolas o laptops les puede servir para el mantenimiento y cambio de pasta térmica. Además que por el costó si la encuentran barata no tendrán que comprar pasta térmica en un buen rato.

Almost like silly putty but for my application it's a good thing, heat sink for a ebike hub motor or as they are called Hub Sink, but not for a normal ebike, off road 5,000/10,000 watt ebike. The Hub sink fits in the centre of the motor so working around the spokes is a pain in buttocks.... but this stuff stuck em in place, 6 of them, no problem and no slipping while bolting together. Been using Artic products for a long time but artic silver 5 not suitable for this application, too thin and would have ended up everywhere.

Best and easy to work with. I could replace thermal paste for my 3 pcs with it. And still some of it is left.