Question 1

I got this for my wayne dalton 3016 classic drive door and it will not pair. anyone have any luck with this?

Accepted Answer

Once I found the correct instructions for these, I was able to pair them to my older Wayne Dalton Quantum 3212. Someone had posted them in their review and they worked! Basically, press and hold the button on the remote until it begins flashing. Release and press/hold the button again until the green light flashes. Then, go ahead and pair it to your opener following the instructions that came with it.

Reprinted here for anyone having trouble:

fter countless hour to research finally found the right instructions! Thanks me later after you try this on the model 3212 or 3213. The motorhead are so old, it's such pain in the button to program a new remote .

Changing the Transmitter Code
1. Press and hold the button on the transmitter that you want to change. The GREEN LED will flash once and then turn off.
2. Continue to hold the button until the GREEN LED begins to flash (approx. 10 seconds).
3. When the GREEN LED flashes, immediately release the button and then immediately press and hold the same button again. The GREEN LED will now come on steady.
4. Continue to hold the button until the GREEN LED begins to flash (approx. 5 seconds).
5. When the GREEN LED flashes, immediately release the button.
6. The code for this button has now been changed to a new randomly generated code. Do not push the button again until instructed in "Programming Transmitter to Power Head Unit".
7. You must now re-program this transmitter to the motor head unit. See "Programming Transmitter to Power Head Unit".
Programming Transmitter to Power Head Unit
1. Press the PROGRAM button located on the garage door motor head unit once. The PROGRAM STATUS light on the motor head unit will turn on and remain lit for one minute, indicating that it is ready to learn the Transmitter code.
2. Press the same button on transmitter as you did in "Changing Transmitter's Code" above. The PROGRAM STATUS light will turn off indicating a successful learn.
3. Press the same button on the Transmitter once more to operate the door.
4. If you are unsuccessful in programming the transmitter to the motor head unit of if the button does not operate the door or if you wish to program another button to operate a different door, you must change the transmitter's code.
Battery
If the LED does not turn on when button is pressed, replace battery.

Question 2

Will this with 297134??  Opener is from mid 80?

Accepted Answer

We could not get it to work. Very unhappy. We had a remote in the house for the door. We wanted one for our vehicle. This garage is not connected to the house. While trying to get it to connect it did something to the remote in the house we use and now that remote no longer works. So now we have the door button on the outside of the garage. We have to open and close the door from the outside. If we forget to close it at night we have to go out there to close the door. Our opener is from the 90s. It is a Wayne Dalton opener.

Question 3

will this work on a wayne dalton model 02-3047-2buh ?

Accepted Answer

I had no success in getting either remote to work as advertised. I had knowledgeable techs working with me and again no success. I'm not sure why we never got the expected results I just changed my opener to another manufacturer's brand.

Question 4

Are these remotes Compatible with other brands

Accepted Answer

I don't remember if they were advertised to work with other brands, my opener is a Wayne Dalton.

Manufacturer	Garage Stop
Country of Origin	USA
Item model number	784-69340
Package Dimensions	14 x 11.4 x 5.99 cm; 181 g
ASIN	B08M68M9RK

About Us

Customer Services

Customer Support

Regional Access

Legal & Policies

Social

Get the App

2 Garage Door Opener Remote for Wayne Dalton Wayne Dalton 309884 3910 297132 303 mhz

Description

Specifications

Have a Question? See What Others Asked

Common Questions