STANLEY MAXTSEEL Multi-Angle Vice, 1-83-069

This vise is very nice for the price, it's very smell but very sturdy with a solid design. First glance: I noticed the ball joint, threaded rod, and guide pins were quite dry with a very light machine oil applied so I disassembled the unit degreased it then liberally coated the metal on metal contact points, the ball joint, the threaded rods, and the guide pins with moly grease: 1. Unscrewing the threaded rod all the way releases the front jaw half. 2. Using a size 2 slotted screwdriver you can gently pry the circlip from the threaded rod shaft which releases the threaded rod from the jaw assembly. 3. Unscrewing the smaller spring/washer retained bolt and the two larger phillips screws frees the ball joint clamp assembly. There is no bushing or bearing to take the load of the guide pins so i filled the jaw half cavities with moly grease and after assembling the unit i wiped off all the excess that built up and degreased the jaw halfs so now the unit is built more accordingly to last a lot longer. I'm looking into designing some bushings and guide pin bearings to print with my 3d printer to see if i can make the jaws stay aligned and not wobble. Overall its a great vise and i've needed a vise for decades but dont have a proper solid table that would be suited for bolting a big solid vise, this is a hobby vise that is mobile and is perfect for my airsoft gunsmithing. 5/5 would recommend to anyone, I'd also suggest mirroring my actions to degrease clean and grease the unit with a proper grease designed for metal on metal contact that will reduce wear ultimately prolonging the longevity of the vice, I know it's only £22 but a bit of rust or uneven wear or galling would ruin things quickly.

I've had this Stanley multi-angle vice for several years and it has been a really handy tool to have around. The adjustable angles are genuinely useful for awkward jobs where a normal fixed vice would be limiting. It holds things securely and has been reliable through repeated use. The build quality is good and it has stayed tight and functional over time. A very useful addition for DIY and hobby work.

As sturdy as a small vice can be, although the ball mechanism is hard to tighten so it doesn't vibrate loose - it did for me twice when using it to hold a small part while sanding, and the sander vibrated it loose. It is very versatile however, and offers good angles to clamp anything small to medium-sized, especially considering its low price.

Really handy small vice, the angle of the jaws can be adjusted to any degree or plane to give the best working position for the project.

Very honestly, I cannot recommend this vice highly enough. It is relatively small, but has an awesome grip, and is very very versatile. Pros: + Very cheap + Small + Very sturdy + The multi-angle is much more useful that you'd think + If you need a simple stable one instead of a multi-angle, this rests nicely on it's side for a permanent small-ish vice with good grip + The jaws open quite a lot for it's size and you can fit an entire small pcb inside for soldering So and so: * It could have benefited from attached spirit levels to make sure it's level, but honestly I can't complain for the price. Negative: - The jaw pads are very sensitive to high temperatures - The only thing I can think of which isn't ideal, is that if you damage the jaw pads, it would be almost impossible to find replacements. Also, the replacements (if you are so lucky to find any) will probably cost about half the price of a new vice :( Do not let the negative dissuade you from buying this. Just be careful when using the jaw pads, or if what you're going to be holding will heat up, just remove the pads, do your job and replace them. If you damage them, buy some A70 black rubber and some tire glue and make new ones, as this is the cheapest and easiest method to replace them

Versatile Grip: A Review of the STANLEY MAXSTEEL Multi Angle Vice 🔧💪 As a DIY enthusiast and craftsperson, having a reliable, versatile vice is essential for my workspace. When I came across the STANLEY MAXSTEEL Multi Angle Vice, I was immediately intrigued by its claims of 360-degree rotation and locking capabilities. After putting this vice through its paces, I'm ready to share my thoughts. Positives: • The durable, corrosion-resistant cast-iron construction of this vice instills confidence, knowing it can handle a wide range of clamping and holding tasks without fear of damage or wear. 💪 • The patented ball joint design allows for full 360-degree rotation and locking at any angle, making it incredibly versatile and adaptable to my specific needs. This is a game-changer for access and positioning. 🔄 • Many customers, including myself, have praised the compact and lightweight nature of the vice, making it easy to transport and store without sacrificing strength or stability. 🏠 Potential Drawbacks: • While the removable rubber jaw pads protect delicate surfaces, a few users have reported that they can occasionally slip or become dislodged during use. Proper maintenance and care are important. 🧠 • The bright yellow and black color scheme, while visually appealing, may not suit everyone's workshop aesthetic preferences. 🎨 As a customer who has been using the STANLEY MAXSTEEL Multi Angle Vice, I can say that it's a fantastic tool for a wide range of projects. The 360-degree rotation and locking mechanism make it incredibly versatile, allowing me to position the vice exactly where I need it for maximum accessibility and convenience. The cast-iron construction is impressively durable, and the compact size makes it easy to store and transport. While I've occasionally had to readjust the rubber jaw pads, the overall quality and performance of this vice have been excellent. I highly recommend it to anyone in need of a reliable, flexible clamping solution for their workshop or craft space. Overall, the STANLEY MAXSTEEL Multi Angle Vice has proven to be an invaluable addition to my workspace. The impressive range of motion, durable construction, and compact design make it a versatile tool that can handle a wide variety of clamping and holding tasks with ease. 🌟 While the occasional minor issue with the jaw pads is worth noting, the vice's overall performance and capabilities firmly cement it as a top-notch choice for DIY enthusiasts and craftspeople alike.

I bought this vice to cut keys and for the price at well under £20 I have not been disappointed. It took a little time to unpack the unit, without being brutal with the packing, but it came without paint blemishes. The only difficulty I did experienced at this stage was placing the vice jaws upright as the ball joint was very tight. I was attaching the unit to the kitchen table. I applied a little grease to the ball and this solved the problem. However, I did wipe as much grease as possible from the ball once I got it moving in case this might effect stability later. The screw operating the jaws worked very smoothly and after extracting the movable jaw completely I did insert a standard 10mm bolt to see how well it performed in the threads. A standard 10mm bolt operated perfectly through the threads so there does not appear to be any current problems with the cut of the threads preventing the jaws moving smoothly. The jaws are 70mm wide, without their rubber covers, and the capacity would appear to be 75mm. The unit did not attract my magnet, so I assume the vice is made from aluminium. The movable jaw does jiggle slightly but I found that this was an advantage when aligning the v grooves in the jaws to hold tubular objects. One could easily align the tops of the jaws so they were level. The top part of the table clamp has a protective rubber cover to prevent damage to the table surface. However, the underneath has no protection and if there is one mod I would like it would be a greater surface to the cup underneath. I think the underneath small cup/clamp might move in time without a bigger cup area. All in all I feel the vice is well designed, very flexible in its positioning and excellent value for money as a hobby unit.

This vice is just excellent. But a bit of context first: I need a vice for modest woodworking jobs, scale modelling and the like, and so I purchased one of the other offerings here on Amazon. Specifically, the DAKFOOK 80mm Table Vice Clamp for £20.99. It seemed pretty good when it arrived, but I noticed soon that the lever that locks the vice to prevent it swiveling around would not lock tight, meaning that relatively little force would cause the unit to rotate around the desk-/bench-clamp. In addition, closing and opening the jaws started making a grinding sound, which came from the clip that keeps the one half of the jaws assembly where it should be. Duly, I decided to return it for a refund and started shopping for something else. I noticed however that a great many of the vices available from Amazon (at the low end of the price range, same as this vice) are obviously constructed using essentially the same castings. That is, there is probably some principal supplier for the companies that sell these vices, which manufactures the castings to which the vice companies apply paint etc. and do a little assembly. Clearly, there was no point in my purchasing one of the competitors to the DAKFOOK as I would be purchasing a replica essentially that would yield only the same or similar problems all over again. So I looked at the Stanley vice, bought it (for just one pound more than the DAFOOK) and I am now one very happy bunny. This is an excellent product - high quality castings, everything tightens and loosens as it should, things align as expected; a sound impression of professionalism - there are no apparent problems at all. In particular, I was concerned about the lockable ball-socket feature, but my fears went unrealized. That is very good indeed, giving an excellent range of movement (three degrees of freedom) and it locks rock steady. It seems unlikely that you would get away with trying seriously heavy-duty wood-/metal-working with this vice. After all, it clamps to your table/workbench rather than being screwed down (note: the bench clamp is very good, like everything else with this product), but it is not really intended for that. It suits someone with my lower-scale requirements down to a tee - I should have got one of these years ago. A final point: I read pretty much all the other reviews here for this product and I must say I had no issues with chipped paint and the like that those reviews mention. The paintwork on the item I received is just fine, so it seems fair to say that those items to which those other reviews refer were simply oddities that fell below the quality control threshold. This is an excellent, inexpensive product of very competent construction. Stuff the competition in this price bracket, get yourself one of these.

I have another portable table vice that I bought years ago, some no-brand low quality product which was OK but disappointed on a few things. I wanted something better and I'm very happy with this Stanley product. It exceeded my expectations. It holds work very firmly and is stable. It maintains tension in the ball joint when you loosen it so it doesn't flop about, which is a good touch. My only criticism is that the rubber guards on the mouth come off rather easily, and I expect they could get lost. But that's not a huge issue. I recommend this product.

Purchased the vice at an amazing price for a brand tool of this versatility, functionality & performance. Adjustable to a large range of positions, grips securely & comes with rubber jaw covers. Very satisfied.

Súper práctico y versátil, muy útil además de bonito.

Dobrze wykonane imadło, zapewniające stabilizację obrabianego przedmiotu. Wystarczająco szeroki rozstaw szczęk, super opcja pracy pod dowolnym kątem. No i ładne to jest. Da się przykrecić wszędzie. Polecam.

I am very impressed with the quality of this little vice. It clamps well. When ordering, I was worried about swivel clamping, I was expecting it to have some play, but it clamps well and doesn't move.