LEDURD2 Motorcycle Auxiliary Lights Kit Spot LED Driving Fog Lights with Switch Wiring Harness Kit for BMW R1200GS F800GS K1600 KTM Universal Motorcycle Fog Light Pods 36W 6000K

The lights come complete with jnstall kit. Just BE CAREFUL when tightening the screws that hold the lights to the highway bars as these can strip easily when an impact wrench is used. Hand tighten only and not too much. I took these on a 3,200 mile road trip and they handled well except when outside temp got down to 10 degrees farenheit. The button would turn off and would not allow me to push it in and work. It was very irritating to have this problem at such low temperature with snow falling and low visibility but hopefully the manufacturer will see this review and improve the button. I will see if i can switch the button to a more robust one soon. The button worked well once i got to area where the average temperature was in the mid 80s.

The media could not be loaded. Had the product on the bike for 3 months and they stopped working. Customer service responded to me within 24 hours. Working with them now. Will update as i continue. I received a notification from the seller that they had already shipped a new product. That means that they shipped a replacement product within 48 hours of my initial complaint to them. I think that is pretty solid customer service.

I bought these to mount on my '06 KTM 950 Adventure. They definitely light up the dark places that I couldn't really see before. They don't turn night into day, but they do enough to see what's on the side of the road. I like that they are easy to adjust and the wiring kit is a big plus. I just mounted the lights, routed the wires, mounted the switch and attached to the battery, very easy.Dislike: the red light on the on/off button died the very first day. But the lights themselves work fine.

Mounting brackets are cheap cast aluminum. Screw stripped with barely any tension. Clamp size not accurate. Cannot keep them in position. Rode three times and now they don’t work. Would not recommend. Nothing but a pain so far!

I bought these to replace a set of Nilight leds as I preferred the mounting option of these ledur lights; (edit 12/27)* the mounting solution is the best thing about these lights and why i still have them*. After getting them, there are several flaws that make the $80 price a bit high. These same lights are 40-50 on "other" websites. They are bright to look at, and will make you seen however they do not throw light far at all. The nilights i had before were at least 50% brighter and further, AND half the price including brackets, harness (with a RELAY). I already had wiring in place so I just spliced the harness in. The other huge let down is that there is no grippy surface on the part that mounts to the bar, or the pivot that the light sits on (up and down). You cannot tighten the pivot enough to keep it in place before it cracks. You have to add rubber straps, and I ended up dabbing plastic binder to keep the pivot from moving.. againfor $80 not acceptable. These are being returned and I'm going back to my old set up, I wil just mount the lights elsewhere.**Update 12/27 ended up keeping these because I couldn't find an alternative way to mount the rectangle lights without risking body damage. Removing the grille helps the light output quite a bit, it's not designed for this light at all. However the price is still too high. Also something to consider for offroad use- every mounting arm and surface, with the exception of the light body and the grille is plastic...

Bought 3 different light kits before tbis one. This is the only one that came with everything out of the box. Installation took less than 20m (no instructions included...)Seem durable enough. Mounting brackets are really flexible on how you can adjust. My onky complaint is that the mounts only fit a certain rube diameter, it does not come with multiple size spacers/rubbers, only a plastic insert. If you're tube size is larger or smaller you'll have to figure it out.Best bang for my buck in amazon, especially for ease of installation.

Installed this lights for my Can- Am Ryker and I love them!! Packaged extremely well and very easy to install. There were no cutting wires, just simply plug and play.The lights are very bright and satisfied my need for how they look as well. They’re aggressive looking which makes my bike look even better.I’d buy this product again if I had too.Thanks :).

The lights themselves are great, the supports are cheaply made. In addition to this, the washers in the instructions are missing. The washers supplied do not fit any of the bolts. One of the bar clamps was missing the connector nut, which makes it completely useless. Spend a little more and find a better product. Totally unsatisfactory.

This is third set of these( 3 different motorcycle)And I think they are the best value out there for AUX motorcycle lights

I received damage

Lights are decently bright, The included wiring harness is well put together and made install very easy.. the mounts seem a little cheap and left a bit to be desired for mounting options on my dr 650. Over all pretty happy with the lights

I like the lights, the work well and look good. My issue is, while adjusting the lights and setting them where I wanted them, one of the threads inside the mount stripped and now I can’t tighten it. I don’t see any way to contact the seller to get a replacement. So 1 star for crappy mounts.Edit: 4 months later, still waiting for seller to send me a replacement mount. Very frustrating experience.

First off, do not expect $250 quality out of a $89 product. They serve the purpose. Wiring is simple if you connect directly to battery. Downside, lights can be turned on when vehicle is turned off. You are better to use a relay or a power source from a circuit that is only alive when ignition is turned on. I went with a relay. Lights are heavy, two thirds of light assembly is finned aluminum. Mounting was frustrating as there was no instructions provided. The shields are a bit to much, I install the shields but hate the look so I will be removing them. For the price, I would purchase them again.