VIVO Electric Height Adjustable 83 x 60 inch Corner Stand Up Desk, 2 Dark Walnut Solid Table Tops, Black Frame, Memory Controller, L-Shaped Workstation, 3E Series, DESK-KIT-3E8D

I've had it set up for a week or so and it's worked well... once I finished getting it set up, which definitely took a while.Motors work well and aren't too loud. Controls are pretty obvious. Desk is huge and very stable. I like it quite a bit, especially given the price.Came in three packages - one for the base and one for each desk segment. I wanted this for upstairs, and the package with the base was incredibly heavy, so much so that it was too heavy to carry upstairs, so I had to take the parts out downstairs and take them up in several trips, which took a while.A couple of the instructions where a bit unclear, which made it take a bit longer.Then, as you may have read in other reviews, you will need to drill holes, as the pre-drilled holes on the desk boards they provide are for other models. They are clearly mixing/matching parts that weren't originally designed for each other, which I knew was the case going in and I was okay with--and it does work out fine--but obviously added additional time to the process.Plan your holes carefully. I recommend positioning the end of the base as close to the edge of the board as possible before drilling; I mistakenly drilled and fastened them a few inches in from the end of the board only to realize my chair wheels hit the desk feet bars, so I had to unfasten, loosen the screws holding the support bars, move the base, drill and then screw in again.All told, the process took quite a bit longer than I expected, even knowing ahead of time that I'd need to do a little bit of manual drilling. In the end, though, the result is a nice, huge, motorized sitting/standing desk that looks decent enough and definitely gets the job done for a very affordable price.If you aren't at least a little bit the DIY type, this may not be for you.

I got the largest size (83x60) and it's pretty massive. Fits dual monitors and printer on one side and laptop, mail holder, and notebook area on the other side, as well as a plant and photos in the corner. Build quality is excellent. Feels very study and the motor lift is smooth.Assembly is not straight forward for large portions of the process. You're free to lengthen the stand as you wish, but there are no markers to tell you whether the lengths are appropriate for the desk size. Prepare to do a lot of measurements yourself if you want it symmetrical in all aspects. There are no useful pre-drilled holes on the desk itself either. You will have to mark and drill themself as well.

This desk was fairly simple to build alone, took a little time to build carefully but truly serves its purpose. Working from home, needing space to spread out, this is a great option. Dual monitors, printer/scanner, laptops, and writing/notebook space. Moves smoothly, quietly. Sturdy and stable.Can be configured any way you like; either side can be the "short", or "long" tabletop. For. Me being right handed, I opted for setting up the table as right-side extended, left side as the short side.Note- you'll need an electric drill precisely because you can configure as you see fit. Punching pilot holes makes this even easier.Concealed cables with included underside 3M sticky cable management ties. They aren't permanent; you can release the ties and re-tighten as you see fit. I'm only using three of the included ties, I believe there's seven in the kit. I'm saving the others.What does NOT come with my order but for the price I believe should: Cable managers, clips to hang things like headphones off the edge,and a piece to turn the 90-degree corner where I sit, into a rounded area. Adding those elements would be a 5-star desk for the price.

I always preferred L shaped desk because of its utility. I got this because it also had stand up option. I was hesitant as L shaped if not designed properly can be wobbly. This ended up being extremely sturdy and has stood the test of time. Very strong! It is mounting 2 curved big monitors and a laptop now without any issues. Overall very pleased. I just wish their assembly could have been more easier. It took 2 people to put this together and took an afternoon. Company should definitely think about making it easier.Despite that, I will buy it again because of the value.

With single touch of a button can go from sitting to standing. I saw several reviews where people said holes didn’t match, but the leg holes completely matched with no issues. Only holes that needed additional pilot holes was control module and corner brackets. Was easy as pie with a 20v Hart cordless drill.Now because size I was worried about flipping it over so I built two halves upside then flipped halves over and slid together and drilled screws in while both sides was at lowest setting. All in all it took only about hour to build. Now I have done plenty furniture building projects in my life so maybe that is why I found it easy to follow and complete.

5 stars for the desk. 1 star for the assembly and instructions. If they're already putting a dozen predrilled holes for other configurations, why not predrill for this one too?I found the cord for the height adjustment controller would not reach the power supply if I installed them both where the instructions said to. Make sure to check for this before drilling those holes.

Quite annoyed with this purchase at the moment. Just finished assembly today… I had read the reviews before purchasing so was prepared for the absolute terrible excuse for instructions that were included. It was still annoying biggest gripe is that the feet are wider then the table top so you can't push it close to a wall.… there's at least a 3 inch gap between the back of the table top and the wall. The instructions were borderline useless… Scan the QR code in The instructions and find the online video for assembly much more helpful it still didn't show anything about installing the table top. On the large L-shaped desk none of the holes lineup so you have to drill all of your own. It says the pre-drilled holes are only for two legged tables not the three. The electric motor operation is very smooth and quiet. A minor annoyance is that the table top are rounded on all corners including where they join together to make the L shape it's not aesthetically pleasing to the eye in my opinion.

This desk is ok but the instructions are terrible and might as well give you nothing. There are no measurements for where to install the frame and it is up to you to figure this out. I did eventually get the desk installed but no thanks to the instructions.