Condor PSTK-6400 Pit-Stop/Trailer-Stop and Adapter Kit

This stand is delivered complete and requires only simple assembly and adjustment to match front wheel size. It works perfectly with my 2012 Victory Cross Roads. In operation, you just drive onto the stand and step off your bike, which is held securely in the upright position. To exit the stand, just pull up an back on the bars and roll off. Nonslip pads on stabilizer bar prevent slippage on floor, so it does not require any fastening to the floor. Included is hardware required to fasten it to a trailer deck if desired. All material and design appear to well exceed safe use and storage requirements. Easy on, easy off, secure, and the bike stays in the full upright position making for great work access and reduces storage space requirement. I wold purchase this again, but doubt that I will ever have to.

Needed two wheel chocks to use in my garage as well as on my trailer. One for a Honda Shadow (750) and another for a Kawasaki Voyager (1700). I picked up one from my local Harbor Freight store for $59. Quality was ok but getting the Honda on and off the chock was very difficult to say the least. The chock slid all over my garage floor while trying to load and unload the bike, it turned into a two person job. The Voyager would not fit, The front tire is 130mm and the Harbor Freight only holds up to a 127mm width. Ordered a Condor, and after taking all of 5 minutes to assemble I rolled the Voyager right up on it with no slipping at all. It came off the Condor just as easy. The construction and design is much better than the Harbor Freight chock. I'm going to return the Harbor Freight one and order a second Condor. The Condor is well worth the price difference just for the ease of moving it from the garage to the trailer using the quick release mounting not to mention it's a much better design.

Ordered on a Sunday and it arrived on the following Wednesday, well before the estimated ship/arrival date. I had purchased a similar less expensive version from a local national chain prior to ordering this but was not so much impressed by the quality of the product and felt uncomfortable putting a $28K motorcycle into it. I read the reviews for this one and decided to take the chance. It was mostly put together straight out of the box and after reading the instructions on which position to adjust the cradle for my front tire size, I tested the chock out and it was spot-on. The bike securely locked into position the first attempt without much effort at all and it took just a moderate pull on the bike to remove it from the cradle. This chock is far superior and sturdier than the first chock I purchased and I feel it is well worth the money spent! I would caution anyone who had after-market fenders or lowered front fenders to beware and check the measurement before putting the bike into it. The rear of my front fender (2017 Harley Road Glide Special) didn't have much room to spare when clearing the cradle when locking in.

I bought the chock for my trailer and also for in the garage for cleaning bike. After mounting the trailer part on and installing the main chock I was wandering if the chock should be mounted using the other four holes. After contacting the service department about the need to mount further i was assured that was all I needed to mount down. This chock worked just excellent for towing the motorcycle on the trailer. After we returned home I could wait to try it in the garage. I worked great there also, especially for cleaning the grime and tar off the bike. I have a lift bar that I bought at Harley for lifting either the front or the back of the bike for cleaning the wheels. This was always kind of scary because I had to hold the bike by one handle bar while pushing down on the lift bar to lift the bike. With the Condor holding the motorcycle straight I can make sure the lift bar is where I want it and lift either the front or the back without having to hold the handle bar. I can also slide the Condor out so I can clean and rotate the front wheel and install it back under to let the motorcycle down. One product to do both jobs. Again EXCELLENT PRODUCT!!!

This thing does what it claims! Very well constructed. A little expensive, though.Works in the trailer. In the garage; dirt bikes are no problem, but trying to put the Harley in it; it scoots on the garage floor, instead.If not for the price and the Harley problem; would be 5 stars, easy.

Likes:*Not as heavy as it looks.*Easy to move from trailer to garage floor (especially with included adapter)*Definitely does its job and kerps the bike upright.*Adds piece of mind if nervous about transporting bike on trailer like i was.Dislikes:*Bolts that slide into the quick connect adaper needed to be backed out a bit of the unit in order to slide in. This boggled my mind a bit but it all still seems to work fine and the bolts still seem like they are threaded enough to be plenty effective. But something to be aware of.Still give it five stars. Very well thought out and something you shouldnt ever have to purchase again!

Fantastic and easy to use. This is the same chock Harley sells with their sticker on it.I took a trip with my bike, Harley Electra Glide, on a trailer. The trailer mount was easy to install and is hardly noticeable. I had the bike on the trailer with only 2 straps. I drove for over 2000 miles without any problems and the bike never moved. I even hit a few big bumps.Well worth the money for the ease of use and peace of mind.It can be a bit of a challenge to get the bike out if you are not a big guy/gal. I adjusted the bottom forward one notch to make it easier.

How oh how did I ever live without these? Got two - one for my Honda Jury and another for my Goldwing. Both bikes stay in place. The trailer stops make throwing these bad boys on and taking them off my flatbed aluminum trailer a breeze. Pulled them behind a rented RV from Denver to Sturgess without incident. And, again, taking them off takes seconds. Great product. I cannot recommend them highly enough! I also recommend the RHINO USA Ratchet Straps to use with these. Between the two, loading, unloading, and transporting my two hefty bikes is a piece of cake!

Solid, easy assemble and install, excellent quality!

👍

Très solide et très pratique

OEM ONE, GOOD QUALITY PRODUCT

It is so well made