Professional Pull Press Sleeve Kit 28 pcs Remove Bushes Bushing Bearings Seals

Great product they work good saved my butt that’s for sure. Buy it.

Box was damaged a lithe but no effect to anything. Seems really good quality and everything was there.Update— used to press in subframe bushings and bent 2 rods doing so. It still technically works but be warned on tough jobs

I needed to replace the lower control arm bushings on my 2005 Dodge Ram 1500 4x4. The lower control arm has a forward bushing that is pressed into the control arm and rear ward bushings that is pressed into the frame. This bushings tool kit worked out perfectly! With all the cups and seat caps provided in the kit I was able to fit the exact cup to the bushing size and it popped out with ease. I recommend this seller and this product. It was definitely worth the price and made my project much easier to complete. I saved $700, minus the price of this tool, in taking my truck to a mechanic to have this work done.

After lots of effort removing the first bushing and the lots of effort to get it pressed straight. I could not get a second bushing removed as the sleeve kept going in at an angle. I eventually figured out it was because the spindle bent fairly badly. So it was helpful, but next time think I will use a hydraulic press and the sleeves might help for that. Also bought a new better m16 all thread, maybe that will work for bushings in parts I can’t remove and place in press.

I haven't had a chance to use this yet but it seems like it should work. Looks to have everything I'll need to remove and install the upper control arm bushing in my ZJ.My set was missing the 12mm bar, nuts and washers, it did have an extra 10mm threaded rod but not the nuts and washers. Not a big deal for me since I don't need the 12mm and having an extra 10mm threaded rod around is never a bad thing.

Saved my a** when putting polyurethane control arm bushing in my 2017 tundra. The brand that this is copied from is well over 400$. And yeah sure you can go to and source all the tube's in the sizes that are in the kits but at less than a Ben Franklin you have the whole set up sent to your door in 24 hours.

you need a 23mm wrench and a deep deep deep socketquality parts, very heavyhad every size for the big bushings but to big for the small bushings . i used an small impact socket as the pusher

I bought this to press out some suspension bushings and was surprised how well it actually worked. It isn't compact when assembled to work, so don't think you are getting it into tight spaces. I needed 4-6" both sides of the bush being removed.For the amateur mechanic that doesn't use the tool all that often, this was a good buy.