DEFTInterior Clear Wood Finish Gloss Lacquer, 12.25-Ounce Aerosol Spray

Good stuff

Yep, it's great. The easiest, fastest high-gloss wood finish I know of. Application doesn't require any special care (although you want to seal pores with dewaxed shellac first) and compared to polyurethanes, the result is almost always defect-free. Sanding between coats is not necessary, but if you need to fix any issues, it can be attempted within 30-60 minutes without taking any risk. After the final coat, the project can be handled within 30-60 minutes, too.Compare this to having to wait between 6 and 72 hours when using most polyurethanes.The end result typically exhibits high gloss without any special buffing, but if necessary, it polishes and buffs very easily - more so than most poly coats.There are just two trade-offs. First of all, the lacquer is solvent-based and uses some fairly aggressive and harmful solvents, so it stinks to high heaven; work outside. Secondly, nitrocellulose finish, although fairly tough, is more vulnerable to abrasion, alcohol, acids, and water than polyurethane or epoxies. In practical terms, this means that it's a good choice for cabinets, boxes, and perhaps some lightly-used salad or fruit bowls. It is a markedly poor choice for kitchen tables, kitchen countertops, and other high-use surfaces.I attached a photo of a pencil case finished with this lacquer.

I have been using this lacquer on many projects and all you need to do is PUT ON LIGHT COATS!If you MISS a spot or think you did not get enough on a spot-DO NOT try to spray RIGHT ON IT!JUST come BACK with your SECOND spray and make sure to go over that missed area!after you do 2 coats --LET IT SIT, for about 20 minutes( if it is tacky to the touch- just wait 5 more minutes)Then-- take a piece of a brown PAPER bag-- and rub( yes- brown paper bag piece)-- let this sit and then, spray 1 more coat (this coat is OPTIONAL)!JUST don't stand and FLOOD a spot, because you missed that spot! Remember to keep moving and lite coats!Deft Dries SO MUCH BETTER and MUCH quicker than ANY other lacquer I used!After you are done, look at your project over next few days-- it WILL have a a harder, clean, bright look( i used GLOSS)!Deft looks BETTER WITH TIME, and NO POOLING, as it does self level!Make SURE to WEAR A FULL MASK and goggles( safety first)This was used ONLY on OIL and SOLVENT based projects-- this is OIL based Lacquer and I have not used it on ACRYLIC paint!

Sure - this is a nice deep gloss finish. Not high gloss, but a great, classic wet wood finish. Just like you will see on any Gibson or Fender today.A single can will easily cover a LP style guitar from rough wood to finished product and this is multiple coats with sand downs between coats. Just make sure you use a wood sealer first and Deft makes a great sealer as well.But the absolute best feature of this product is the spray nozzle; the best I have ever used in an off the shelf spray can. Good consistent results, no spits, no clogs. All the way down to empty. Just remember to always invert and clean between applications and you will get a consistent 3" fan. Same results with multiple cans now.

Always works the way laquer should. Good stuff.

I was using this to clear-coat an electric guitar finish, but abandoned it after 3-4 coats. The product itself is fine, but after the first two uses I couldn't get an even spray despite cleaning the spray head after use (as directed). Instead of a fine, even spray, I got a fine spray mixed with random globs of finish. Switched to Behlen and never looked back. Maybe my can was a lemon, but I plan to steer clear in the future.

This product leaves a nice hard finish which has a little depth after 3 coats. I was able to spray the coats about 45 minutes apart with no sanding in between, even in damp weather. I found that it took a few more days to really harden though. It took me 3 cans to spray 3 coats on 5 degree-sized picture frames. I'm giving 4 stars because the finish becomes much less even with little bubbles when you get about 2/3 into a can. So I was unable to use the full can. Overall, I would recommend this product and will buy more to use again. Just make sure to really shake it for a minute (no marble) and turn upside down and clear the nozzle as instructed before spraying.

I woodwork. I don’t spray finish. I really don’t like finishing so I watched a million videos and Deft seemed to be a ‘go to’ for a lotta people so I got some. And I’m glad I did. Easy to apply. Easy to use and a fantastic finish that will last.