---
product_id: 355735784
title: "Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White"
brand: "leviton"
price: "₪587"
currency: ILS
in_stock: false
reviews_count: 5
url: https://www.desertcart.co.il/products/355735784-leviton-ods10-id-decora-120-277-volt-wall-switch-occupancy
store_origin: IL
region: Israel
---

# Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White

**Brand:** leviton
**Price:** ₪587
**Availability:** ❌ Out of Stock

## Quick Answers

- **What is this?** Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White by leviton
- **How much does it cost?** ₪587 with free shipping
- **Is it available?** Currently out of stock
- **Where can I buy it?** [www.desertcart.co.il](https://www.desertcart.co.il/products/355735784-leviton-ods10-id-decora-120-277-volt-wall-switch-occupancy)

## Best For

- leviton enthusiasts

## Why This Product

- Trusted leviton brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Description

Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White : desertcart.in: Home Improvement

Review: Highly recommended! Works with electronic ballasts! - If you're looking for IR sensor switches to automatically turn on lights when you enter the room, then turn them off when the room is empty, get these sensors and don't hesitate to pay a little extra. They require no neutral wire, but still work flawlessly in 2-way arrangement (two switches controlling the same lights--either sensor turns and keeps lights on when motion is present) as well as with circline and other fluorescent lights with newer electronic ballasts. My first purchase was for sensors found at Home Depot. After installing these, I learned that a small amount of current trickles through the switch to run the infrared sensor, and this low current is enough to cause electronic ballast to try to start--hence the HD sensors caused my fluorescent bulbs to flicker even when no motion was present. My second attempt was my own failure to read the details on Leviton IPP15 and IPP0R sensors. I read the "Manual On" as an infrared sensor with a "manual-on" override switch similar to the ones I bought from HD. These DO indeed work with electronic ballasts, but they ONLY come on via the manual button--then turn off when motion in the room stops. When I bought these ODS10-ID switches, install was a breeze and everything worked the first time. I was very pleased. One very minor disappointment is that the inactivity timeout settings allow for either 30 seconds or 10, 20, or 30 minutes. I'd think a 2 or 5 minute timeout would be ideal, but is not an option. They call the 30 second timeout a "test" mode, which is fine for testing switch operation, but we also found it is ideal for things like a laundry or utility room. You don't stand motionless there and if it doesn't sense movement for 30 seconds, the room is likely empty. We have the 2-way switches set for 10 minutes in the basement. Note: NO NEUTRAL IS NEEDED for these, which is impressive and makes installation a breeze. Somehow, they found a way to run the infrared sensor with a little current without tripping the electronic ballasts. But these sensors are great and my wife smiles at me every time she goes into the basement and laundry room with arms loaded with laundry and the lights greet her without effort.
Review: Bonne qualité - Bonne qualité bon prix très facile à programmer Merveilleux

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B0007N72P6 |
| Actuator Type | Touch Button |
| Brand | Leviton |
| Brand Name | Leviton |
| Circuit Type | 1-way |
| Colour | White |
| Connectivity Protocol | Wi-Fi |
| Connector Type | Screw |
| Contact Type | Normally Open |
| Control Method | Touch |
| Controller Type | Push Button |
| Customer Reviews | 4.3 out of 5 stars 450 Reviews |
| Global Trade Identification Number | 00078477010181 |
| International Protection Rating | IP54 |
| Item Dimensions | 7.3 x 4.8 x 11.8 Centimeters |
| Item Height | 4.63 Inches |
| Material Type | Plastic |
| Model Number | ODS10-IDW |
| Mounting Type | Wall Mount |
| Operating Voltage | 77 Volts |
| Operation Mode | ON-OFF |
| Specification Met | UL |
| Switch Type | Push Button |
| Terminal | Screw |
| UPC | 078477010181 |
| Unit Count | 1.0 Count |
| Wattage | 800 Watts |

## Product Details

- **Operation Mode:** ON-OFF
- **Operating Voltage:** 77 Volts
- **Contact Type:** Normally Open
- **Connector Type:** Screw
- **Brand:** Leviton

## Images

![Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White - Image 1](https://m.media-amazon.com/images/I/31VWDdxRwQL.jpg)
![Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White - Image 2](https://m.media-amazon.com/images/I/51Fu+mDUK7L.jpg)
![Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White - Image 3](https://m.media-amazon.com/images/I/51HAQYjVIrL.jpg)
![Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White - Image 4](https://m.media-amazon.com/images/I/51WvJtdTd3L.jpg)
![Leviton ODS10-ID Decora 120/277-Volt Wall Switch Occupancy Sensor, White - Image 5](https://m.media-amazon.com/images/I/51j3FkH9LqL.jpg)

## Questions & Answers

**Q: Hi, can i use them in 3 way? I need to place one on the top and another one on the bottom of my stairs.**
A: Yes according to the instruction manual here: http://ecx.images-amazon.com/images/I/71rJUsXIQ3S.pdf (link above feedback on Amazon) Connect Black to blacks. Connect the blue wire on each to the black wire going to the light. That will allow both to sense motion at same time. Can also be used with a normal 3 way switch where blue is the carrier wire.

**Q: will thsi work in Europe?**
A: all depends on your voltage in Europe. Seems to me if it is 110 to 277 volts there should not be a problem. anything more than that and it probably will not work. best bet would be get ahold of Leviton.

**Q: can i dissable the motion sensor? and just use it as an on/off switch?**
A: On some wall mounted motion sensors there is a switch with OFF-ON-AUTO functions. This is referred to as manual on/off override. It allows you to easily switch between full manual and automatic modes.  This unit is not so equipped.  It can be setup to allow manual on off functions, but this requires gaining access to the setup controls (under the cover). To go back to full automatic operation you once again have to change the internal settings. Not exactly convenient, or practical if you wish to change back and forth on a routine basis.

**Q: Is a neutral line required?**
A: Like most switches, a neutral does not attach to the switch.  This dimmer has 3 wires, hot, load and ground as does a typical single pole light switch. Also, it is not powered through the ground as someone else stated.  Read the user guide if you don't understand this.  The neutral wire runs from the light fixture(s) to the neutral in your load center.  The circuit requires a neutral. If you are replacing a standard single pole switch this device should work fine.  In a 3-way circuit, the switches connect in parallel to the line (hot) and load (fixture) so only 2 wires are required between the switches unlike a typical 3-way circuit which requires 3 wires between the switches, so it you are replacing standard light switches you will have an extra wire.

## Customer Reviews

### ⭐⭐⭐⭐⭐ Highly recommended! Works with electronic ballasts!
*by S***Z on 17 April 2011*

If you're looking for IR sensor switches to automatically turn on lights when you enter the room, then turn them off when the room is empty, get these sensors and don't hesitate to pay a little extra. They require no neutral wire, but still work flawlessly in 2-way arrangement (two switches controlling the same lights--either sensor turns and keeps lights on when motion is present) as well as with circline and other fluorescent lights with newer electronic ballasts. My first purchase was for sensors found at Home Depot. After installing these, I learned that a small amount of current trickles through the switch to run the infrared sensor, and this low current is enough to cause electronic ballast to try to start--hence the HD sensors caused my fluorescent bulbs to flicker even when no motion was present. My second attempt was my own failure to read the details on Leviton IPP15 and IPP0R sensors. I read the "Manual On" as an infrared sensor with a "manual-on" override switch similar to the ones I bought from HD. These DO indeed work with electronic ballasts, but they ONLY come on via the manual button--then turn off when motion in the room stops. When I bought these ODS10-ID switches, install was a breeze and everything worked the first time. I was very pleased. One very minor disappointment is that the inactivity timeout settings allow for either 30 seconds or 10, 20, or 30 minutes. I'd think a 2 or 5 minute timeout would be ideal, but is not an option. They call the 30 second timeout a "test" mode, which is fine for testing switch operation, but we also found it is ideal for things like a laundry or utility room. You don't stand motionless there and if it doesn't sense movement for 30 seconds, the room is likely empty. We have the 2-way switches set for 10 minutes in the basement. Note: NO NEUTRAL IS NEEDED for these, which is impressive and makes installation a breeze. Somehow, they found a way to run the infrared sensor with a little current without tripping the electronic ballasts. But these sensors are great and my wife smiles at me every time she goes into the basement and laundry room with arms loaded with laundry and the lights greet her without effort.

### ⭐⭐⭐⭐⭐ Bonne qualité
*by T***X on 14 November 2023*

Bonne qualité bon prix très facile à programmer Merveilleux

### ⭐⭐⭐⭐⭐ Una maravilla de producto
*by A***R on 23 August 2023*

Lástima que esté descontinuado

## Frequently Bought Together

- Leviton ODS10-IDW Decora 120/277-Volt Wall Switch Occupancy Sensor, White
- Leviton + 80601-W 1-Gang Decora/GFCI Device Wallplate + Midway Size + Thermoset + Device Mount + White

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.co.il/products/355735784-leviton-ods10-id-decora-120-277-volt-wall-switch-occupancy](https://www.desertcart.co.il/products/355735784-leviton-ods10-id-decora-120-277-volt-wall-switch-occupancy)

---

*Product available on Desertcart Israel*
*Store origin: IL*
*Last updated: 2026-02-06*