🔧 Upgrade Your AC Game with Style!
This 5-piece set of high-quality brass and copper access valves is designed for efficient refrigerant charging in air conditioning systems. With a tube size of 6 x 90mm and a sleek gold and copper finish, these valves not only perform well but also enhance the aesthetic of your setup.
| Material Type | Copper |
| Exterior Finish | Brass |
P**N
Better then expected!
I read all of the negative reviews but still decided to buy these. Tube is thin indeed, but it is soft only at the tip where actual service valve is brazed/soldered. Copper will be soft when heated. For one time charge/recharge it is perfect. If you have to use it regularly, this is not for you, as it can be bent if you pull on charge tube or it can be twisted if you tighten charge hose to much. Very good quality for the price. I recommend
C**
Good, but could be made better.
The copper pipe is so thin. Replace with thicket gauge.
J**E
Thin, but works.
As others have mentioned the copper is quite thin, however with that said this is a very economical pack. The valves don't leak. Just use care with installing them, go slow with brazing, and don't man handle the tube.
S**.
Good value. Fridge is up and running. Service ports work as they should.
Copper tube bends easily and will kink/fold easily. Be careful.
E**R
Worked great for recharging a refridgerator that had lost its R134a
After following some youtube video guides, I was confident I could repair an expensive wine cooler fridge that used a mini-fridge style system. I cut off the original crimped fill-tube, de-burred the edges, put some flux on one of these valve tubes, and it fit perfectly inside the diameter of the fridge's piping. Heated up the connection with a torch and brazed it with some solder. After recharging, the fridge works great! Saved hundreds of dollars over hiring a technician to repair it.
M**M
Disappointing
Couldn't bend by hand or with tool without thin soft walls collapsing, crushed 4. The last one I tried to cut to fit so I wouldn't have to bend it and the cutter couldn't get through it without mashing it all out of shape. Huge waste of time. After installed, the valve leaked, too.
P**C
To thin, wall thickness is like paper thin.
Appear good from picture but way to thin walled to be useful. They will bend crease and twist badly when you tighten them. Buy others with thicker walls
S**N
Very thin walls but work...
I did not even look at other reviews before buying such a simple part. And indeed, the copper is very, very thin. While they do work I damaged four of the five just trying to get a small 30 degree bend in them to keep the port higher up. The copper would just suddenly crush in the bender being unable to take any stress.
Trustpilot
1 month ago
1 month ago
