New Microsoft Surface Dock Triple Displays Dual HDMI+VGA with Power Adapter,12 in 1 Surface Docking Station for Microsoft Surface Pro 12/11/10/9/8/X/7/6/5/4/3,Surface Laptop 7/6/5/4/3/2/1,Book Go

Needed an additional usb f header on my motherboard for a network card. Works well and now shares the mobo usb header with Bluetooth from network card and corsair rgb hub. Plug and play

It basically does what it says on the tin!!

I neede to add a usb slot to the motherboard to power the case front usb 2.0 slots. This solved the issue. Simply plug into one usb2 slot on mb and connect the two headers to it.

Needed to install a new WiFi PCIe card that included Bluetooth which required an internal 9pin USB connection. Had to unplug an existing usb connector to get this plugged in its place and reconnect the USB and the extra Bluetooth cable from the WiFi card. Was pretty straightforward and I only had a couple of issues with the WiFi/Bluetooth card, not this connector. Had a little sticky pad on the underside in order to secure it so I stuck it to the bottom of my PC casing.

I was initially happy with the purchase but 8 months later it is beginning to fail and works with an old surface pro 3 but has stopped working on a newer snapdragon surface pro 12 It has turned out to be a bad buy and hence cannot be recommended

It works , I use it for my fan controllers. However it has a bright blue LED that stays lit even when power is switched off so have to turn off at the plug to get the light off.

Returned and refunded by amazon. Vendor contacted me an offered a free replacement and that works perfectly.

Pcb is an internal USB extender, giving you a few extra slots if you ran out. Works fine, no issues, the blue light on the board can get annoying if you can't hide the board somewhere

Avendo un Mac con solamente 2 slot USB, avevo bisogno di un HUB di espansione, ed ho optato per questo.Qualità di costruzione buona, è di plastica ma è abbastanza robusto. Il cavo è lungo, quindi è possibile metterlo dove più comodo. Quattro slot USB 3.0 ad alta velocità per attaccarci ogni dispositivo si voglia.Alla baste trovate quattro buchi per fissarlo tramite viti alla scrivania, al muro, volendo anche al PC o dove vi serve per mantenerlo più stabile.Il dispositivo funziona molto bene, fa egregiamente il suo lavoro, non surriscalda ed è abbastanza contenuto nelle dimensioni, per cui si può posizionare ovunque.Nel complesso un ottimo prodotto se avete bisogno di un HUB di espansione per le vostre USB, buon compromesso qualità prezzo.

Simple y práctico. Fácil de instalar y sin necesidad de configuración.

Aus der etwas konfusen Beschreibung wird vielleicht nicht für jeden sofort klar, was dieses Teil eigentlich genau macht.Es ist einfach ein USB Hub, welche einen USB Eingang auf 4 USB Ausgänge verteilt, allerdings intern im PC Gehäuse. Die Anschlüsse sind dabei so ausgelegt, dass der Eingang mit einem USB 2.0 Anschluss auf dem Computer Mainboard verbunden wird, die beiden anderen Anschlüsse sind für USB Ports am PC Gehäuse. Pro Ausgangsverbinder können zwei USB Ports am Gehäuse angeschlossen werden, also insgesamt vier.Gedacht war das Gerät für einen 4-fach USB Anschluss am PC Gehäuse. Auf dem Mainboard war nur noch ein Anschluss für zwei Ports frei, somit funktionierten zwei USB Anschlüsse am Compter nicht. Über dieses Gerät können nun alle 4 Gehäuseanschlüsse belegt werden.Das Gerät funktionierte sofort so, wie es soll. Der Hub wird von Windows 11 sofort erkannt, alle zum Test angeschlossenen USB Geräte funktionierten einwandfrei. Also alles so, wie es sein soll.Man muss natürlich auch die Grenzen kennen, es ist nur USB 2,0 und es kann auch keine leistungshungrigen USB Geräte versorgen, dafür ist es nicht gedacht. Geeignet für Mäuse, Tastaturen und andere USB Geräte mit kleiner Leistungsaufnahme und max. USB 2.0 Geschwindigkeit.

I have an Asus b550-e mainboard installed in a Cougar MX331 Mesh case. I have 4 RGB fans, a fan controller, plus the CPU fan which also has RGB lights. With all these controllers, the mainboard was 1 USB header short of what I needed to connect everything. I had initially left the front panel USB 2.0 ports disconnected because I didn't have enough USB headers.I found this handy-dandy Internal USB splitter on-line and purchased it. It was exactly what I needed! I plugged the short, included cable to a USB header on the mainboard, then plugged my fan controller and the cord leading to the front panel USB 2.0 jacks into the splitter. It worked like a champ! The splitter came with a peel-off "sitcky pad" which allowed me to easily attach it to the inside, rear of the case. The splitter has a blue LED indicator which lights up, to show that it has power. I highly recommend this product! Shipping was very quick and efficient.

Prodotto fatto molto bene in maniera semplice con adesivo per fissaggio. Mi ha risolto un problema per il collegamento alla scheda madre con dissipatore NZHT e ventole Corsair con controller. Consigliato