Question 1

Is there a web site that shows how to install this brand windowtinitng. We am doing this in my home. Is there a side that goes to the glass?

Accepted Answer

Hi

The window tint film do have the adhesive side, you will have to peel off the clean side to apply on the window

Here is the instructions:
Step 1
Clean your windows thoroughly with a mixture of 1 teaspoon baby shampoo to 1 gallon bottled water. It's important that you use a solution of no-tears baby shampoo and bottled water to provide the correct pH and final clarity to your project. Never use any cleaner containing vinegar or ammonia to clean the film or windows, as this could damage the film.
Step 2
Cut a piece of film 1 inch wider and 1 inch longer than the window you plan to cover.
Step 3
Spray the window liberally with the same solution you used to clean the windows. Keep your hands moistened with the solution to prevent leaving fingerprints on the film.
Step 4
Use two pieces of transparent tape to remove the backing from the film. After you have exposed an inch or so of the film's adhesive backing, spray the film with the solution. On large pieces, you'll need a helper to keep from contaminating the film when the backing is removed.
Step 5
Starting at the top, place the adhesive side of the film on the glass and work your way down the window. Position the film so it's centered on the glass and spray with the solution. Squeegee any bubbles to within 2 inches of the edge of the window. Keep the surface of the film wet with the solution so the squeegee will pull across it easily.
Step 6
Use a utility knife to trim the film. Leave a 1/16-inch border between the edge of the film and the window.
Step 7
Respray the surface of the film and squeegee out any bubbles. Bubbles will be able to escape through the space between the film and the edge of the window.
Step 8
The film should begin to stick within 30 minutes and normally cures fully in 1 day

Question 2

is this enough to tint my car front windows only

Accepted Answer

Yes, this product are good enough for front windows, depends on which vehicle you will apply, his might enough for comeplete tint project 2 front 2 rear and back glass

Question 3

Is there enough todo a 05 Silverado extened cab?

Accepted Answer

No get two rolls especially if you've never tinted before

Question 4

What is the best way to clean the tint after applicantion without damage after appication?  I am very happy with the product!

Accepted Answer

I have had no problems so far using plain glass cleaner such as Windex

Manufacturer	MKBROTHER
Brand	Mkbrother
Product Dimensions	91.44 x 2.54 x 2.54 cm; 272 g
Item model number	203610
Manufacturer Part Number	203610
Item Weight	272 g

Mkbrother Uncut Roll Window Tint Film 20% VLT 36" In x 10' Ft Feet Car Home Office Glass

Details

Description

Specifications

Have a Question? See What Others Asked

Common Questions