Thermaltake Core V21 SPCC Micro ATX, Mini ITX Cube Gaming Computer Case Chassis, Small Form Factor Builds, 200mm Front Fan Pre-installed, CA-1D5-00S1WN-00 Black

I want to build my own Media Server so looking for a small casing. Its micro atx, but i think its a full casing. Shot in height but width wise its good enough to have 3 fans GPU and AIO. Very good air flow, almost from 4 sides.

it's so easy to install components and designed for use in either a vertical or horizontal orientation.

which motherboard can fit inside itry three type off bu failed to fit in

good job

Bast case

The glass broke in the same day i finished installing my pc, suddenly i touch the corner of the glass, got broke and made disaster

Tutto ok

Muy buena caja para montar un servidor para el salon

okay i normally don't write reviews but when i was looking for a pc case, i wish someone gave the info and review i am about to give. To start off, i have been using this pc case for over a month now and i have been in love with it since the very first time i have booted it up. the case itself is very nice looking and has a sleek design. the extra big side window is awesome as you can literally see everything in the case. what i really like on this case is the option buttons you get. two of the buttons determine if you want to run the fans on high or low. one of my main concerns for a case when i was searching for them was for it to have a ton of airflow while being silent. this case is definitely doing both of those jobs amazingly. even when you have the fans running at the high option there are pretty silent. if your room is completely silent you can still barely hear the fans running unless you put your ears to them. on low mode its just completely silent. because this case comes with three 200mm fans and a 140mm exhaust fan it moves a ton of air flow!!! especially with the size of this case which is another amazing factor about it. this is probably one of the largest full tower you can get. thermaltake did a amazing job making sure you have all the space you need for your computer needs. you can literally fit anything in this beast. i also really love the led on/off switch. these fans have beautiful bright blue l.e.d's which light up the whole inside part of the case. i highly recommend this case to anyone looking to upgrade. it wont disappoint! pros: - LOTS OF SPACE (MORE THEN PROBABLY NEED) - Lots of air flow - silent fans - the amount of hdd bays - easy assembly - high quality parts - dust filters - usb 3.0s - dust filters - the case itself is good looking Cons: - i haven't found any at the moment (will update when i do find one) my build with this case: - AMD FX-8320 FX-Series 8-Core Black Edition Processor - Cooler Master Hyper 212 EVO 120mm fan - Corsair CX750 Builder Series ATX 80 PLUS Bronze Certified Power Supply - ASUS M5A99FX PRO R2.0 AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Motherboard - Corsair Vengeance Pro 16GB 2x8GB DDR3 2400MHz - EVGA GeForce GTX 760 Super Clocked ACX 2GB GDDR5 - 2 Seagate Barracuda 3.5 Inch 2Tb 7200 Rpm 64Mb 6Gb/S Internal Sata Drive this runs like a beast. will upgrade to new graphics card soon.

Está torre es conocida por poder encontrarse en el mueble de Ikea expedit y/o clones. El montaje lleva un poco más de tiempo que la típica caja de torre o sobremesa, pero luego queda totalmente ordenado. Dispone un sistema modular para colocar unidades de 2,5", y luego la típica bahía para unidades de 3,5. Queda muy ordenado por dentro

For the price, you really can't go wrong with this case. It has practically everything you could ask for and then some. I was looking for a good, rather inexpensive case for a new build and settled on the Thermaltake V31 after reading all the reviews and watching several reviews on Youtube. I liked what a saw, a lot. This was probably the easiest case I've ever used for easy cable management. There are cut outs and grommets just about everywhere. Routing cables was never easier with the V31 and I ended up with a very tidy build. I opted to give water cooling a try for the first time and it was easier than expected. With the radiator installed at the back of the case, there's plenty of room to use a regular case fan directly above it. On some cases, there's not enough room to do this. I particularly like the magnetic air filter on top of the case. What a great idea! I'm also glad there's room for two drive bays in front of the case. I always like to have an optical drive and card reader on my computers. I'm trying to think of some negatives but they are few and far between. The plastic window on the side seems a little fragile so I recommend using caution and not bump it and get it scratched. There were a few remarks about cheap thumbscrews.. but they seem to be fine and do what they're supposed to. The included screws didn't seem to be the right thread for the standoffs so I used some that I had left over from previous builds. I didn't want to strip anything or damage the mobo when attaching it to the case. The mesh design on the front of the case is very classy-looking and I like it. If you like fans, there's room for a ton of them and then some! I really think Thermaltake gives you a lot for your money in this under $100 case, so I'm extremely satisfied.