VIVO Adapter VESA Mount Quick Release Bracket Kit, Stand Attachment and Wall Mount Removable VESA Plate for Easy LCD Monitor and TV Screen Mounting, Stand-VAD2

This mount can be VERY useful to solve unique mounting issues...with some caveats as others have noted....The GOOD to GREAT: Used this mount to fix an HP branded 27" monitor to a Dell-specific 27" stand. As you look at OEM-specific stands, they are generally similar, with the difference being mounting bolt patterns and spacing on the monitor mounting heads...not VESA, but kind-of similar. Typically these are flat metal plates with a variety of holes, tabs, and slots that line up with the specific quick-release mounting plate pattern on the back of their own screens.* I had an extra Dell 27" stand, and using a standard VESA plate as a pattern, I found 2 top holes that lined up with the top 2 holes of a 75mm VESA mount. (Yes you do need to remove the trim plate(s) and remove the center screws that hold the plate to the mounting base top/tilt plate.) I marked 2 additional spots from the 75mm spacing, and and then drilled out, now having 4 holes that matched VESA mount spacing, at 75mm.* Different vendor OEM plates may require some fudging with 75mm and/or 100mm spacing until you can find or create holes that allow fixing of the Vivo VESA mounting adapter "back" plate.* I took off the square plastic Dell trim from the top of the stand, but was able to leave the small circular trim that covers the top tilt plate and spring tension mechanism.* Before reassembling, I sprayed the back of the top plate with some leftover paint, so that it wasn't bare metal...not necessary, but a nicer look.The MEH to MAD: As others have noted there are some manufacturing or quality type issues. Mine was opposite of other reviewers, in that the mounting and VESA adpater plates were so tight I had to use a hammer to initially separate. I tried to bend the grooves and plate around to loosen the fit, but does not easily or reliably release to allow removing the monitor. Once I fully mounted, it essentially froze tight again. It's not the biggest issue, and better than being loose and wobbly, but I would like the option to remove the screen from the stand as intended. Not a deal breaker. But a little discouraging, and reason for 4-star review.This mount is soooo close, but does enough to make it a really useful option for some unusual mounting situations. It's definitely worth trying to see if it works for your needs.*******************************************************************************UPDATE 5/29/25: Despite the issues with the first mount, I purchased 2 additional, for a total of 3. Neither of the newer ones had the binding problem, and appear to cleanly release. I'm upgrading my review to 5 stars.Have now adapted a 2nd Dell stand (24") that required re-drilling all 4 holes for proper alignment/attachment. And, also an older Samsung stand (early 2000s 20.4" 204B)...all 4 holes in the metal bracket aligned with the 100mm holes, and just had to drill out the plastic trim behind the metal mount.VERY useful mounting bracket. Definitely try if you need to mount unlike monitors without buying a new VESA stand.

Works great. Sturdy. Easy to use. Purpose: easy attaching/removal of my gaming monitor to a custom vesa floor stand for non permanent usage on couch when main TV is otherwise occupied. Yes, my monitor had a recessed area. No, I did not use the included hardware on the monitor side of things. It does need extenders that work to counter the recess. Plan to probably buy your own monitor spacers if you have a recessed vesa panel. I had some spacers laying around. Otherwise, this fit the bill perfectly. Monitor comes off for storage and floor stand folds up for storage as well.

Works really well, but the screws didn’t fit my screen so I had to go to Home Depot at get M4x6mm screws instead of the 12mm screws. Other than that, no issues.

I don't know what I did without this slick device. Like another recent reviewer, I use this to quickly hang and unhang a monitor for DJ/Karoke gigs. The receiver plate is secured to a standard VESA mount with four screws, and the quick-mount adapter attached to my monitor with another four screws. The monitor + adapter slides down into a V-shaped channel and clicks and locks into place with a spring clip. Simply push the clip lever to unlock and slide the monitor up to remove. I purchased a 2nd kit so I can quickly swap the monitor for an ipad holder if needed. Well worth the price for speed, ease and coolness.

These quick release mounts are great for when you need to be able to quickly change monitors. I will say that they do add quite a bit of slop to the mount, so if your bothered by your monitors not lining up exactly, these will be a problem. The mount is solid and I'm not concerned with the monitor falling off, just know that it's not going to be as tight as a solid mount.I've used this mount for multiple monitors and it's held up very well. Being able to quickly swap out monitors on the same vesa mount saved me a bunch of time and hassle.

Gets the job done. Yes there are far more elegant solutions with a price 10X of these brackets. Most of the hardware is all you need with the exception of some odd configurations. I have a Dell monitor with a curved back. Using the supplied spacers I was able to clear the monitors built-in release button. I had to make a trip to the hardware store to get some #8 machine screws that were long enough to mount the adaptors but not pierce the monitor's innards. #8 x 1/2 at $.43 each.Still these are a heck of good buy at the price.

The mount works fine - but it comes with a very poor assortment of screws. There are only 2 lengths provided. The shortest length was more than twice as long as what I needed. So I had to go to home depot and spend another $3 on screws.

I have used this quick release mount on at least a half dozen different monitors and TVs (up to 32 inches), and their mounting brackets. This mount does what I expect it to do, it allows me to quickly move a screen from one mounting location to another with easy.If I could change anything I would ask that it be even more sturdy than it already is. I'd love to see the slots and mating tabs moved as far as possible to the outer edges of the brackets. As it is right now, the screens feel a BIT wobbly when moved and give the impression that the monitor can be rotated when, indeed, it can not. This is a good design but I think it could be made even better.Don't get me wrong, these do work very well and I will buy more if needed. The brackets fit well together, for most part, and even my 32 inch monitors feel as though they are secured solidly to the mounts I have them on. I've looked at other quick change mounts (there are a lot available) and this one seems to be the best so far.I certainly recommend these to anyone who is interested in a VESA quick change mount.