SUPULSELiPo Charger Lipo Battery Charger (Without Adapter) S6 10A 150W DC 1-6S LCD RC Charger Battery Capacity Checker RC Car Battery Charger Discharger for Li-Po Li-Hv Li-Ion Li-Fe NiMH Li-ion Pb

This is a very nice 6s battery charger, my only complaint is that they don’t provide the power cable for the DC input

This is a rebranded toolkit RC m6 v1 running 1.3 firmware. There are several things that make this an unsafe charger.1) factory voltage calibration is way way off. Outputs almost 1 volt higher then what is set in configuration and displayed for voltage. e.g. if end voltage is set for 4.1 volts its actually outputting 4.8 ~ 5.1 volts.2) factory current calibration is off by 500ma ~ 1A. e.g if you set configuration to charge at 1 amp it will show on the display its charging at 1A but with a bench meter connected it shows the m6 charger is actually charging at 1.5A ~ 2A.3) Even after manually recalibrating the m6 voltage and current it does not charge properly within the range set in the battery profile configuration. Yes its is closer to being within tolerances but the way the manufacture has the PID configured prevents this charger from being a viable option.4) In power supply mode constant current does not function properly. e.g if you set voltage to 5V and 1A. Once it goes into constant current voltage drops as expected but the current increases to 3A. This should never allow the current to go above the set amperage.I recently found out that tool kit RC (OEM for supulse s6) has released a version 2 of this charger that has an updated main board an running different firmware.I’ve returned this supluse and ordered the actual toolkitrc m6 V2 to see if in fact they have fixed or improved on any of these issues. If I discover that the m6 V2 does function better I’ll update this review to help other be better informed.I didn't know that it was posable to upload video reviews until after retuning the supulse otherwise I would have posted video show these faults.Edit 2-3-21I received a m6 version 2( not the v1 that this seller is selling).Ive went through the all the same calibration procedures with the V2 and it far superior than the v1. The V2 does not have the over voltage or over current issues that the V1 has. From my understanding these issues were fixed with a combination of hardware and software upgrades. So V2 firmware (2.x) will not run on a V1 charger running 1.x firmware.So to determine if you have a V1 PCB or a V2 PCB check the firmware revision in bottom right corner of the splash screen when the charger is first powered up.If the firmware number starts with 1 then you have a v1 circuit board (dont use it with any type of lithium battery).If the firmware number starts with 2 then you have a v2 circuit board. From my extensive testing V2 should be safe to charge any kind of rechargeable battery, lithium, nickel metal hydride, or lead acid.

I use this as my portable charger. It travels well and I use it with a 12v plug. Easy to use and will store three battery profiles.

This is a nice Smart Charger and can charge different kinds of batteries. And it is very versatile and portable. It has a lot of features and I use it a lot to charge my LiPo and Li-Ion RC batteries.

This thing is awesome. Super compact and very versatile. I love it

No power source included

Item did not power on.

Did not work