Natural Luster paver sealer from Seal ‘n Lock is a high solids, urethane modified acrylic sealer for brick pavers (with an algae and mold inhibitor) that penetrates the pavers to provide a protective barrier with superior joint stabilization (no need for polymeric sand) resulting in a natural luster. Natural Luster paver coating is user friendly and environmentally safe. Natural Luster is user friendly and environmentally safe. The high solids content of pure urethane wears evenly and lasts longer than solvent based sealers. All Seal ‘n Lock products are made of the most environmentally-friendly products available, and offer excellent weatherability, UV protection, and help prevent algae and mold. All of our cleaning and sealing products and specialty coatings are VOC compliant in all 50 states, and exceeds all hardscape product manufacturers minimum standards guidelines. ESTIMATING GUIDE: Typically, the application rate will vary from 150 to 200 sq. ft. per gallon for this paver coating, although this rate will vary depending on the texture, absorption rate of the surface and the width of the paver joints. DIRECTIONS FOR USE: We recommend wearing protective goggles and latex gloves. For best results, apply Natural Luster at temperatures between 60° F and 90° F. In cooler conditions, the sealer should be warmed to approximately 70° F. Do not apply if surface or ambient temperature s below 50°F. A test for compatibility, penetration and adhesion is recommended. If the temperature is going to drop below freezing (32° F) make sure sealer has time to cure. MIXING: Natural Luster is designed to be diluted with water 1 part water and 1 part sealer with a 2 coat system (flood coat and top coat). Natural Luster requires mixing and stirring (2 minutes) prior to use. DRYING TIME: Natural Luster paver coating will normally dry in sunny areas within approximately 1 hour. For more information visit https://www.thepaversealerstore.com
Trustpilot
5 days ago
3 weeks ago