FEZIBO Monitor Arm Desk Mount - Premium Aluminum Single Monitor Stand Gas Spring Articulating Full Motion Computer VESA Mount, Extra Height Adjustable with Extension Pole | Holds Screen Up to 17.6 lbs

Stability: ExcellentVertical, horizontal, rotation tension: ExcellentTilt tensions: PoorValue: GoodThis otherwise excellent and very affordable product is hindered by a difficult-to-adjust tilt tension, which is a big deal for me given that my ultra-wide monitor is close to the max weight listed in the specs. I also tested the tilt functionality with a lighter, 23" monitor with similar results. The tilt is weak. After some fiddling (and a somewhat stripped out hex nut), I am able to keep my monitor from tilting down, but I am not able to tilt it up at all and have it stay in place.The vertical lift is no problem, but took quite a lot of turns to get the tension adjusted correctly. Once proper tension is achieved, the gas-filled action works like a charm and stays in place as expected.The desk clamp is also excellent and makes the arm very stable. It is more stable than the original stand that came with the monitor.

As an Engineer and Computer Professional I was impressed with this monitor arm, especially for the low price. I bought 2 of these monitor arms, each one for a 16.5 pound 32" monitor. The arms are holding my monitors without sagging or bending in spite of the weight and the very long (20") maximum arm extension. The arm is sturdy, attractive and easy to assemble / adjust. It is very easy to mount the monitor on the assembled arm. Many monitor arms require the monitor to be bolted to the stand with 4 separate bolts, by holding the monitor in the air while bolting the screws. This is difficult for one person to do alone. With this FEZIBO monitor arm, you first bolt the VESA plate to the back of the monitor, while it's is lying flat on a table, and then you just pick up the monitor, and slide it on to the arm. Very easy for one person to do alone. A very nice touch is that the base of the arm has a caddie for the (supplied) wrenches, so that you don't misplace them or have to go looking for them. The cable management channels (for the power and video cables) are attractive and look like an integral part of the monitor arm.

First off, I sit sideways to my desk. I wanted something that would bring out my main monitor into my normal field of view and so I could see my TV same time. I did not test the clamp on style base. In my old desk I drilled a 3/8" hole for the bolt since I was getting rid of it in a few weeks. That worked well. This new desk had a hole for LED lights cableing that I wasn't going to use, so I used that hole. It's super sturdy this way. You can tighten up most of the range of motion bolts to make it easier or impossible to move.My only gripe, but it wasn't enough to knock a star off (maybe .25 stars) is that the up and down motion of the end arm is not. It's either all the way up locked in or all the way down. You get vertical movement by moving the entire arm on the pole up or down. I think it would be better to create the same locking bolt so you could have even more adjustment on that arm. However, since I keep it at 1 height when I'm using and resting on my desk when not, it wasn't enough for me to get upset about. I put it up and adjusted entire arm on the pole for my viewing pleasure. The part that monitor sits on can rotate up and down angle as well a bit. So you can have it higher then your eye level but angled down at you. That can be adjusted as well tightness wise.Overall an excellent monitor arm.

This monitor mount is awesome. Its very sturdy and beats the others Ive used in the past. I know it will hold at least 18lbs. I have my Dell Alienware AW3418DW 34" Ultrawide 16.10lb monitor mounted to it with ease. This mount comes with everything to mount on the back of your desk or in the middle with drilling a small hole. I have mine mounted in the middle of my desk. I put a 5lb weight on top of it and the arm still held up. The joints are nice and solid, no squeaks and it can rotate any direction and can reach out very far or push back pretty flush. It also has 2 channels to route and hide your cables. I have the power cable, very thick DP cable and USB cable ran through it with no problems. I spent a lot of time looking for a monitor arm and landed on this one. Its just as good as ones 2x-3x the price. I highly recommend this mount.

On black Friday I almost purchased one that was supposed to be on sale for like $70 dollars. Then I searched and found this, for $30 dollars !!! I was expecting a plastic trying to look like a metal kind of thing, but no, this is a real metallic material. So I was happily surprised. Then I saw so many pieces, to assemble that I thought that was the catch... but everything is perfectly labeled. And the instruction are clear as water. Most of the pieces are becuase the offer different ways of attaching it to your desk, I used the clamp option, but you can tie with screws if you want, and they provide all the pieces if you go that route. So when I finished and attached tne arm I was really surprised of how nice it looks and works.... can't go wrong with this one... if you find a better deal please let me know, but I doubt it.

At first, I was pretty happy with these monitor arms. They were packaged well, attractive, and quite sturdy looking. Once I actually tried to use them, however, I found that some of the pivot points would not hold my monitors in place, no matter how much I tighten the tension screws (I purchased two monitor arms - they both have the same issue). I'd seen some other folks' reviews complaining about the same thing. I wish I'd heeded those. Knowing what I know now, I would not purchase these monitor arms again.

I was concerned whether this mount is going to work for my 29" AOC monitor or not. After the installation, the monitor kept falling down (AOC weighs around 15lb). I had to tighten the screw counter clockwise to adjust the tension and now it holds the monitor in place. I am pleased with the extra room and countless number of adjustment available with this mount. The base of the mount is large and supports my large monitor really well.