PS3 Move Quadruple Port Charging Station

I purchased this charging station due to the great price, even after i read all the bad reviews after all it couldn't be as bad as they all said right? Well it's not that bad, in fact after using it for a week the only thing about it i dislike is the bright lights, but that was easily taken care of by covering then with some thin strips of black electrical tape. Now i hardly see the lights at all.It charges very well as long as yo make sure the controllers are in place correctly, and that is not a hard thing to do. Just place the controller into the charge port and give it a slight turn until they fall into place. Once they are in the correct place they will hardly turn at all and there you have it a correctly docked controller. Not at all that hard to do.My charging station works with all four ports. I am sure things can go wrong during manufacturing that can cause a port to not charge but it obviously doesn't happen on every single charging system like some of the reviews say.In the end the charging station works just as described, charging up to four controllers at a time without to much of a issue and at a great low price.

The quad port charger is awesome looking! a bit bigger than it looks in the pic but no problem there. The lights are bright and appealing to the eye. blue when fully charged, red when charging. Also comes w a DC plug-in as to not use up 1 of your USB slots. having the camera plugged in for the move and a controller or PSP plugged in to charge is VERY handy as u have no slots to spare. The only complaint I have is the move controllers dont sit in real sturdy position or seem to lock down in any way... The motion controller seems to sit a bit better as it seems to have more weight than the navigation controllers do. if u dont get them in JUST RIGHT you can come back later and find out 1 or more of the controllers have leaned into a non-charging position. Seeing as the Sony version of this charger is 25 bucks and has only 2 ports, no cool lights and uses a USB slot instead of DC plug-in makes this item well worth my while and an extra 3 seconds of my life to make sure the controllers are properly sitting in the cradle is no problem to me. 4.5 of 5

Before I got my charger delivered from Amazon, I read the negative reviewshere and the good reviews, and I was a bit nervous who are right, but Ijust got mine and I charged my 2 move controllers and 2 nav controllers andthey are charging perfectly!!the main good feature I like is the nice lights it has around the ports, andwhen its charging its Red and when its done its Blue, I love the idea howthe lights shows you when its finished chargingand here are a few points I would like to point out.1) It is very easy to set the controllers into charger and stay charging,you just simple have to out the Move and Nev controllers in the Port and itscharging perfectly!!2) It charges very fast, and charges much faster than the USB cable, sinceit charges with pins and took me about 2 hours to get a full charge, whichthis is awesome!!3) No need to plug in any cables into the controller, just need to put it inthe Port, like I saw from a other review that its like a Non contact charger4) I like that the base is long rather than 4 in a square type, and its muchnicer.5) and at the end, the best part is the Price which is amazing deal!!So I am not sure why I saw a few bad reviews on this product, even though Isee a lot of good reviews as well, but this product works by me really goodand fast, and Nice!!This product is a Must have for your PS Move controllers

The good:It charges the move and nav controllers just fine.It seems to charge them faster than through the USB port so that is always good.Easy to see (understatement as it is very bright) LED lights to know when charging and when done.I like that the base is long rather than 4 in a square type configuration since that fits better in the space I have reserved for it.The bad:Bright LED lights surrounding the hole. These are blue when a controller is already charged, and red while charging, but always on and blue even when empty as long as the base is plugged in. That is terrible if you have this in a home theater environment since the lights are VERY bright. Which means you'll have to unplug it if you need those lights off. It would have been better if it's fully charged or empty then the lights are off.It is a bit difficult to know if the controller is in properly. Even if the controller is fully charged it will turn red for a moment so you'll know when it makes contact properly. But getting it in properly is a bit of trouble. I tend to slightly and very gently twist the controller to make sure the prongs are in contact. But I am guessing after reading some reviews of others that they are fragile and it won't take much force to break the prongs off. I had no issues doing it but I was exceedingly gentle when I did the twisting motion.No off switch. Since the LEDs are always on when plugged in, there should have been an off switch on the base so you don't have to go and unplug the wall wart all the time.There is a product manual sheet of paper and it is adequate though extremely brief with no explanations at all about controller placement or anything like that.Overall:It's a good price for the charger, and much better IMHO than plugging it into a USB port of a turned on PC or the PS3 console itself. If you don't mind the really bright LEDs or can put it in an area where the light won't bother you then you can just keep it plugged in all the time. Unfortunately for people like myself, I will have to unplug it every time I am done charging at the very least or maybe put it on a power strip that can act as an on off switch since it is in the field of view for my TV.

I swear every once and a while it doesn't charge even though the charging light indicates it is. BUT....It works great otherwise. It cuts down on cords and 95% + of the time I have no issues.

Great charger but easy to knock the controllers off

El producto esta genial. Llego en perfectas condiciones y lo mejor es que puedes poner cualquiera de los dos mandos en cualquier puerto sin importar su tamaño.

No disappointment.

Entendí mal, pensé q eran controles inalámbricos