Corsair Carbide Series 678C Low Noise Tempered Glass ATX Case, Black

I did a new build last month and have been running it since. Running an ASUS MB and have plenty of room for everything. An insane number of cages as well as thoughtful design for access and cabling. By far the best cable management job I have ever done, mostly because of all of the access and many attachment points around the interior. The power supply cage is a little tight for big hands to get in but was very workable. There are plenty of colling access panels and the airflow is great.This is a BIG case but that was ok with me as it aids in cooling.

Pros: Supports e-atx boards while being an atx caseCan have up to 8 3.5 hdd (corsair only include 6 hdd brackets) 3 2.5 hdd mounts in the back and one drive bay at the top for a dvd driveAlot of space to work in for cable managementGood quality pannels and good paint on the white caseFan controler that can control 6 fans powered with a sata cableCons: Vertical mount gpu can be hard in this case if u have a 3 slot card like the ftw3 since it only support 2 slots or have a tall card like the gaming x trio which can kinda get in the way of the hdd cagesFront panel is made of plastic and has no air vents unless u open the frontFor price point kinda expected to see some kind of rgb fans to be includedCan kinda get cramped if u have a long or thick gpu (could just be me since have alot of hard drives)Over all case is great could be better on the pricing though since for near $200 case not really worth it. Wish corsair included the remaing 2 3.5 hdd cages and that the front panel wasnt plastic. Airflow wise make sure u have a lot of top fans pulling air from the top vents if ur gonna have the front closed off.Updated with the tested gpu1. Evga Ftw3 vertical mount is impossible due to the three slotregular mounting no issue but gets really close to the second hdd cage from the bottom2. Msi gaming x trio gpu is very long so have to remove the second hdd cage and or thrid hdd cage to fit in. Vertical mount have to remove up to the thrid hdd cage due to lenght and height of the card3. Gigabyte aorus xtreme gpu fits in with no issue and vertical mount has no issue with hdd cage in the way.4. Asus Matrix have to remove the second hdd cage for it install but removing the third on recomended. Vertical mounting is the same best to remove the thrid hdd cage

This is an excellent case. Even more awesome when you consider how reasonable the price is.This is a clean, conservative case. It does have a glass side-panel/door, so you can show off lighted internals if you wish. All points of air entry have a filter. All panels have sound deadening material applied (except the glass). Even with -9- fans inside, unless I'm really pushing the system (i.e. 4K video rendering +), the system is quiet. When used for just doing office productivity work (Word, Excel, Outlook...) the fans never spin up enough for me to even hear them.Any heat emitted is a function of the electronics placed within. That said, it is far from the hottest box I've ever had.Absolutely love the chassis. Only one nit. Depending on the motherboard used, attempting to fit USB connectors (i.e. MSI Godlike m/board) can conflict with the central ports. My solution, get a $3 right-angle (down) USB adapter. Zero proble.

The side panel on the motherboard side has already been annoying to get back on for me and looks like it will be an issue. So that stinks but the case overall is beautiful and I was paranoid that it wouldn't cool well because of negative reviews talking about this case having issues with cooling. I do not notice any issues with cooling and I have great temperatures in the lower 30s when idle using a wraith cooler on a Ryzen 7 3700x with a MSI B450 Motherboard. The case itself isn't super silent with the top mesh part on but it's not loud either. The temps I'm getting are with the top mesh on and not the solid piece that could and probably would restrict airflow. So to end this review my biggest disappointment with this case is the side panel on the motherboard side because it's already starting to warp on me a little bit. Not happy that they didn't construct it better so you can easily slide it on and off. It's already messing up for me and becoming obnoxious to take off and put back on. I bought this like New condition for 130 on Amazon so not a terrible price for a nice looking case. I am satisfied with it.

Usually when you find a case that says it is quiet, it usually is not as quiet as you would hope. My last case, Antec, was loud enough that I could not hear the ceiling fan spinning. After installing all the parts, including a Corsair Hydro, I thought the sound from the ceiling fan was coming from the case. The case sits on the floor right next to me. Great airflow and plenty of room to work with. I like how the HDD bays are separated out as well as the SSD bays. The 3.5 bay had to be removed to account for the size of the Hydro I got, but in this day and age, CD/DVD burners are not comparing to USB Flash drives. I'm running a Ryzen 7 2700x and RTX 2060 XC in this and haven't heard much come from this case. I bought a second one to run a Plex server and it too is doing a great job. Highly recommend this case!

Gabinete extremamente ventilado, PC rodando liso sem aquecimento nenhum !!

Batalle los últimos 3 años en encontrar un gabinete que albergara todos mis discos duros sin que terminara con una maraña de cables. Este fue el único que me ofreció esa opción. Es muy espacioso, ultra silencioso, y muy cómodo de ensamblar. Lo recomiendo al 100%

This case is awesome. So much room for activities!! All the cables and ssd drives are hidden behind the back panel so it looks neat and clean. Love the giant window on a hinge, dust covers use magnets, high quality fans. It's a beautiful case, worth the money.

Cercavo un case che potesse ospitare almeno 3 dischi da 8 Tb per i miei archivi e mi sono imbattuto in questo spettacolare esemplare che ne potrebbe contenere anche di più. Le ricerche si arenavano su dei cases che in fondo, anche cambiando il disegno, erano tutti uguali e con soli due slot da 3,5" disponibili. Questo ha tutto lo spazio di cui abbiamo bisogno, anche per schede video parecchio lunghe, ha un controller per la gestione di ventole (3 in dotazione) al quale possiamo attaccarne altre, nel mio caso un raffreddamento a liquido che ne ha due con i led. Gli accessori sono completi , anche le prolunghine per raggruppare i led da attaccare alla main board. Non voglio dilungarmi troppo , tanto le caratteristiche sono scritte nella descrizione. Molto Molto soddisfatto

Boitier vraiment très pratique, rien à redire !