Meguiar'sProfessional 6" Soft Buff DA Foam Polishing Disc DFP6 - Foam Pad for Use with a 6" Backing Plate - Light Swirl Removal Pad for Light Cleaning and Polishing

I purchased this years ago and have used this pad with a small orbital buffer to help maintain my car. I have used this with Meguiar's 3-in-1 wax and the results have always been phenomenal (doing polish + wax in one step makes my life much easier, lol). I trust this works with many other brand's polishers as well. I only do a thorough detail of my car seasonally, so the pad has lasted me very long by cleaning it proper.

These pads with an orbital polisher keep my car show car shiney.

All the work was performed on my 2005 E46, which is known to have harder paint when compared to Japanese cars. I prepped the surface my doing a two bucket wash and clay barring after. I did not do a chemical decontamination.This review is coming from someone who got bored during the pandemic and decided to compound and polish his car himself. I was between this pad and the Griot’s orange cutting pad. My main concern was that this was much thinner and it may have a durability issue. From 4.5 hours of compounding, I can say that it held up wonderfully. I cleaned it with a pad brush pretty carelessly and it held up with no tearing of the foam. I used Meguiar’s ultimate compound on both pads. I primed them completely using Apex Detail YouTube videos as my guide and followed his one pass polishing method to see what results I was capable of.The DA polisher used was a Bauer 7.5 AMP DA that you can get from your local Harbor Freight. Vibration with the Griot’s pad was a lot and kind of fatiguing on speed setting of 4-5. While on the Red slim pad, it was almost absent. After getting my technique down, I did half of my hood with the Griot’s and the other half with Meguiar’s.Due to the reduced vibration, I felt as though there was much more control with the Meguiar’s which led to more confidence with adding pressure.I will say that I do believe the pads can probably achieve the same cut, BUT the Griot’s might take more time.The positive about the Griots is that it is more forgiving with mistakes and learning while the Meguiar’s has a bit of a learning curve, although only slightly more than the Griot’s.I got better results with the Meguiar’s and followed it up with an Ultimate Polish.Between the two, I would definitely recommend the Meguiar’s Red Foam DA Cutting pad due to it’s decreased vibration and better cutting performance. It took out swirls, overspray, water etching, and a scratch that looked like someone keyed my car.

good

Couldn't get it at our small town auto or hardware. Looked it up on Amazon and there it was... They work well and glad I found them

After using these for a number of years, I have found their sweet spot.They are versatile in that I can use various polishes, cleaner waxes, and even compounds depending on my desired results and the paint surface.They wash easily, dry quickly, plus the foam and backing material maintain their integrity after dozens of washes.One note: these were designed for shorter throw/orbit dual action polishers and not the longer throw machines.Meguiars designed these to be used with their MT300 DA and similar (Porter Cable, etc).Long throw machines shorten the life of these pads. Let me explain.After using them on my Rupes 21 Mark III I see the foam begin to tear where the edge of the polisher backing plate attaches to the black backing material of the pad. This occurs consistently after the equivalent use of 10 or so complete average size vehicles. The contact surface of the pad is still in tact as is the black backing material.The extra heat and relatively violent rotation with the longer throw machine isn't how these were designed to be used.Even after the tearing I can use the pads for another 5-10 (sometimes more) complete vehicles but it requires being more careful when removing the pad from the backing plate.

I use this pad with my Harbor Freight DA Polisher and it seems to do its job just fine. Don't expect this to eliminate heavy defects but it does well removing light to medium defects. I used it with Meguiar's ultimate compound. Better cutting may be possible with a more intense compound. I have found this pad to last longer than a similar one offered by Chemical Guys. I have the orange hexalogic cutting pad from chemical guys and it heats up very quickly. I had only purchased one and used it pretty heavily one day. As a result, it permanently sunk/shrinked in the middle/center and became somewhat unusable after being used on and off for a few hours. I used this Meguiar's pad in the same manner and it remained much cooler and developed no flaws.

Awesome pads that cut fast.Owning a detail shop we use many different pads but these are our go to foam cutting pads.The pad is flat, no hex design so you get less stalling when using a long throw DA, like a Rupes.The pad never gets hot so the backing never comes apart.They out cut every pad I ever used yet finishes down pretty good, for a cutting pad.You won't find a better foam cutting pads.Pair it up with Meguiars m105 for best results, follow up using their polishing pads along with Meguiars m210.

bon produit

Muy buen marerial y precio, muy recomendado.

funciona muy bien para corte y aplicando el compound quito las marcas de agua y los scratchs, use previamente de otra marca con una pulidora de doble acción, y el pad se empezó a deshacer y romper con 4 piezas del carro este al terminar funciona bien y al lavarlo rápidamente se le quito el residuo

Great buffing pad

bon produit