Professional Audio Bluetooth Power Amplifier - 2-Channel Rack Mount Bridgeable, LED Indicators, Shockproof Binding Posts, Cooling Fans 1000 Watt - Pyle PTA1000

For the price, this unit is unbeatable. No, you won't get stadium level volume out of this unit, but it gives you more than enough for a small venue, a wedding reception, or a small town festival in the park. Set this up with some 12" Yamaha speakers as a supplement to our flown speaker in our church and it works seamlessly with the volume level set at about 80% for both channels. Easy to use and setup, not too heavy or bulky, and fits easily into a rack if we ever need to go that route. Can't recommend it enough. Only ever had good experiences with Pyle products.

I purchased this item to DJ a small wedding reception. It worked perfectly fine on a pair of 15"s 300w rms speakers. I'm not stupid enough to really try to push 1000 watts out of that amp so with my little setup it worked great with amp power to spare. Im just about to buy one more of these for another gig with a larger amount of space to go with a second pair of 15"s. Before you buy any amp make sure you do your homework and know the difference between rms watts and max watts, make sure you know the differences between 2ohms, 4ohms, 8ohms etc. I mean really, who advertises an amps rms power? So is this really a 1000 watt amp? Yes you can get 1000 watts max out of it, but I don't think you would get to enjoy your amp for long if you push it that hard. This is a great amp for the money if you use it properly. Update!! I bought two more. They're reliable so far. My first one runs flawless over more than a year now so I decided to get two more since I bought a pair of PADH152 double 15 inch Pyle speakers. Hmmm. I run one amp on each bridged. Seems like I have too much power for the crappy speakers. I'm going to replace the woofers with real ones but. oh yeah I'm reviewing the amps. They're great and powerful. Love em. Great amp for the price and simply a great amp all around. I just wish Pyle could simply be honest about their wattage ratings. It seems like they have some third world rating system. To me, 20 American Watts equals 100 Pyle watts.

I am quite impressed with this amplifier for the low price it has. I am currently using it to run a speaker system in my room(for movies, music, and video games). One channel is dedicated to powering an 8" 400 watt subwoofer at 4 ohms and the 500 watts of power is perfect for this. The second channel is used to power 2 JVC satellite speakers for upper frequencies. They are 8 ohm so really the amplifier can go 250 watts max with them. This system sounds very good for movies as the subwoofer can recieve a lot more power(those store-bought surround sound packages generally come with an underpowered subwoofer) thus the bass frequencies are excellent. For music I reccomend using an ipod or pc connected to the amplifier, that way you will be able to pre-amplify the audio signal and get the RMS value just right. I have tried using a flash drive plugged into my xbox 360 connected to the amplifier for music, but the speaker system is way underpowered as you can't pre-amplify the audio using this method. Anyway, this amplifier works great for the application I am using it for. I can imagine it would work great for applications such as live sound, PA speaker power, etc. I almost forgot to say this, for the inputs it accepts either 2 cannon male inputs, or 2 1/4" male mono jack inputs. For outputs you can use either the three conductor speaker jacks, or the 4 binding posts to connect speaker wire directly to the amplifier. This amplifier is bridgable, so you can get 1000 watt max power output by using the middle conductor speaker jack(it is labeled) or by connecting the speaker wire to the 2 positive binding posts(no negative involved). If you need 1000 watts of power for a particular application then this amp is great for the price and I highly recommend it. Hope this review helped.

Update 12/26/18 - Amp died and just makes loud distortion sound. Replacing. I am never sure when i order something that seems below the price point it should be - and in the case of this amp i must take the time to tell anyone else considering a basic amp that i am VERY happy with this one. Seems powerful and gets the job done. Note, I did use a pre amp with it as well to adjust the sound quality, the sound was fine with out the prepamp, but i like it to be a little crisper and deeper base. I am using it for home audio, the input is a itunes airport express. Works great so far. I am going to buy a few more for more zones in our building now that i know it works as good as it does.

Pros: Low Price Rack mountable Decent sound Balanced inputs Bridge mode Ground lift Cons: Overstated wattage Extremely loud fans Comments: I bought this unit primarily for the case (a bare rackmount case is well over the price of this amp) and particularly because it is so easy to retrofit with other components. It is a dual-mono design with amp modules and heatsinks on either side and a 33/33 toroidal transformer in the center with the power supply unit (PSU). First thing, the fans are NOISY!! If you've heard the expression "howl like a banshee", in comparison to this amp, the banshee would be near silent. Fortunately, the design of this amp is a single 2SC5198/2SA1941 pair for each amp and generates about as much heat as a 5 watt bulb under the worst conditions so unplugging the fans turns it into (... wait for it....) a very nice sounding 70w/ch amp. Speaking of 70w/ch, I put it on my test bench with an 8ohm dummy load and got 70w/ch before clipping set in. Quite an accomplishment. Bridge mode was not so great yielding only 107 watts but as with many amps in this price range, the small power supply capability hampers them. So how does it sound?? Well, pretty much like any other slow A/B solid state amp. It does not turn in a memorable performance with any music and in fact is quite undramatic. Perfect for background music. The Toshiba transistor pair is very common in a lot of low end equipment and for good reason. Now the bad. For me, I did not intend to use this amp for much other than a parts bin. In parts alone, this amp is worth three times the selling price but for those keeping it be aware that it is hampered by poor build quality. The amp modules are of low grade single layer construction and notably, already bowed despite being mounted on their side. The power supply board fares much better. Although did not remove it for a closer look, it is clearly of better quality than the amp boards. The best part is that the rear input/output board is monolithic and connected to the front panel so the amp modules have only power, speaker and pre-in leads. Perfect for a project amp! One last thing. The meter lights might have been useful but they're calibrated to light when it's too late. Once the signal light flashes, that's peak output before distortion rears it's ugly head. If you see the "vu" meter lights, it's distortion city. Since this chassis is used for other models, I suspect, they're not calibrated for the bottom end amp (which this one is). So that's it. I posted a photo of the internals for the hobbyists (hopefully, they didn't delete it). Hope you find this info helpful.

The cheapest most cost effective amp of which I am aware. Hint it's not a 90 pound 1980s model crown macro tech that'll run a stadium speaker. If you have a peavey sp2g with black widow drivers you should know better than to approach that speaker with this amplifier. What are you thinking. But, the way they have modern stadiums with smaller speakers in the bleachers. Oh yeah this amp could work with those. Never let subwoofer enter your pretty little head with this amp. Think 1970s Honda civic. Just not made to be a truck truck. It's light inexpensive and You could lift it out of a tight parking space so whenever it was big enough to carry what you need it's the go to. I use mine for: Monitors Blown powered speaker- I drop in a passive crossover and a jack plate and use one of these amps. Tops to the main system when using a high crossover point. Like you want the subs carrying the lows and low mids if you're aiming this amp to the audience. This amplifier is little light and darn near disposable. I have several of these. I send these if I'm loaning out a regular pa speaker. You can run one ok pa speaker ok with this amp. Not stellar but pretty good. I've got a DJ using one of these right now. I've got a keyboard player without an amp. I've got plenty of extra passive speakers. He gets this amp and a speaker for his keyboard amp and he's happy as a clam. I make it a point to run one of these whenever its powerful enough. I carry one of these extra for whenever I need to engage unplanned for speaker at an event. I usually run more powerful amplifier as this isn't enough for my mains or subs and I run to many monitors most gigs for this to handle. To put this amplifier into my main system I have to change the load. Like working with smaller people. They'll work just can't carry what big people carry. It's not a powerful amplifier. It's good for what it's good for at an excellent price.

well when i got it i noticed a dent on the bottom that goes down the middle to the back. the lights on channel A dont work but channel B works but you get no sound. so one channel is dead. im using it with a line 6 pod x3 pro preamp for playing guitar live. thats not what its meant for but this was the cheapest amp i could find. this gets very loud and is pretty awesome with my 460 watt cab. it gets the job done for my needs just wish it had no problms otherwise it would of been a perfect amp. i do plan on buying another to see if i can get one thats in mint condition and use this one as a back up. if your considering this just give it a shot and see what happens. amazons returns are easy so yeah. EDIT: i sent it back. what was i thinking keeping a broken amp?

I bought this to run as a PA for our hard/rock/metal band. I use it to run all instruments and vocals out of a pair of 10" floor minitors (8 ohms each). Sound is great, simplicity of operation is terrific, and it suits our needs perfectly. There are two main selling points for me: Price and size. The power capability and sound quality of this unit are amazing given the cost. Item arrived indamaged, perfectly packed, and ready to fire up. I plugged it in to run both a pair of floor monitors, and then to run my pair of twin 15" JBL main speakers. It performed flawlessly both times. The size was also a pleasant surprise. My main PA is a Mackie 1400W unit, and the Pyle amp is half as deep in the rack and half the weight. This amp has delivered for us each jam session, 5 hours straight each time our band rehearses. No overheating, no distortion, no problem.

Buena calidad y sonido. Único inconveniente el cable de alimentación. No es de tipo europeo. Es modelo inglés. Por lo demás bien

Fantastic sound and value for money.

1000w出力に惹かれて購入しましたが、８Ωだと250w×2だった…('д｀|||) 狭い会場では問題なく使えてます(^-^ゞ

Es un equipo muy completo aparte por el bluetooth que trae lo puedes manejar puedes mandar directo la señal y muy efectivo para la casa

Compre um modelo y me mandaron otro modelo ... el anuncio trae entrada usb, tarjeta de memoria, pantalla digital, pero me llegó un modelo totalmente diferente...