Rust-Oleum 248904 Automotive High Heat Spray Paint (340 G, Flat Aluminum) - Silver

It's a quality product, really worked. My search is finished.Keep in mind proper rust removal is required before applying this coat.Then Baking as per the instructions given in the can.Worked and it's almost 7 days and there's no sign of any cracks or colour degradation due to temperature even I tested with petrol on dried coating, it couldn't peel off any colour or the coat.It is really a ceramic coating. Thank you Amazon, mrokart and Rust-oleum.

this product is best.. i have applied to the reddish exhaust pipe of my apache rtr..it looks like new and well finished.. following some points to be consider for better result.1-clean all rust and previous paint by sand paper. the clean the surface..repeat it 2 to 3 times.2-hand practice is most necessary..so first apply on any other things then on exhaust pipe..3- keep the nozzle 6 to 8 inch from the work piece.. apply one to two layer of light coat. let it dry for 1-2 hour..other procedures are written on the bottle..but there is no price tag.. so feeling cheated..

I followed the instructions on the can carefully, but I don't possess the skill set to sand the bike well, in spite of that, with only 1 layer of coating the colour has stayed for more than 3 months now with absolutely no signs of wearing off.Used it on RE Thunderbird 350 on the silencer, where most people complain of the paint burning off, this one is truly heat resistant, it has not chipped even a little bit. Great purchase

Finish colour and texture is Awesome best rust oleum product till now. Due to its real matt colour and texture I use it on many other things

Good product.

First of all i got the paint with a broken seal cap, although not a big deal because the paint seemed to be intact and fineNow i have a bike whose exhaust heats a lot and it had to be painted due to scuff marks and scratches , i prepped the surface with some sand paper (400 grit) and cleaned with rubbing alcohol, i sprayed the paint as instructed and tried to bake , the paint bubbled due to high heat but i switched the bike off and let it sit and cleaned the bubbled paint immediately, i let the paint sit overnight and fired up my motorcycle again in the morning, again it bubbled but now from some places , as this was my 1st paint DIY so i am sure that this bubbling is on my part and not on the paint part, i probably made some mistakes in the prepping and spraying of paint , the surface where it was nicely prepped and primed are looking awesome , go for the paint but get the prep done correctly and go for primer before paint , don't buy from here just go to local market and ask a automotive painter to prep and prime the exhaust before you paint

A must for Indian made cars. Especially for Maruti, Hyundai, Tata and Mahindra .. The exhaust manifold will be good when the vehicle Is new . After 1000 to 1500kms, the exhaust manifold will turn redish brown which is not a rust. The metal that is made up of is of that kind. Auto Manufacturer companies should use such kind of paints, which gives a new look. The "RUST OLEUM"paint is so good, which can withstand high temperature and the paint does not peel off. A very good and a must product....!Thanks Amazon and RUST OLEUM

Coming to the product...regarding the color flat black=(matt blackish almost like black powder coating kinda finish)...motorcycle exhaust got pretty ugly so decided to do a DIY project..took the exhaust apart applied.. Rust Remover & Inhibitor (KRUD KUTTER The Must for Rust - Rust Remover & Inhibitor) cleaned it of with sandpaper & petrol...then went almost crazy with the paint ...applied 4 coats..3 is more than enough. and after 24 hours went on 400km trip...came back washed of the dust & now the paint is baked in perfectly. No chips or flakes. It's a buy for sure. Even tried it on the cooking stove another long story, worked perfectly.