معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🔥 Start Strong, Drive Long!
The Zerostart 3100130 Engine Block Heater is designed for Chevrolet and GMC V8 Diesel engines from 2001-2015, ensuring quick winter starts and reduced engine wear. With a powerful 1000 watts and CSA approval, this heater is the perfect solution for cold weather driving.
B**I
Block heater
Works great, would recommend.
A**R
Read the instructions.
Had to replace this heater after only a year. Still worked great, but it leaked out of the retaining bolt. Could have replaced the seal on the bolt, but if you have to take it out, might as well replace it. Not a cheap part. About $80.00. New one works great.
L**S
Heavy Duty - Better than the ones you can get at the auto parts store
Installed this heater after two NAPA heaters failed after 1 season. This cord has an extremely tight fit to plug into the actual heater. When installing on the Duramax block - It's difficult to get into a good position to properly seat the electrical plug. I installed the plug onto the heater BEFORE installing into the block. For easier installation - use a small amount of silicone grease (plumbing section of hardware store) to ease insertion. Be sure to keep the heater fully inserted into the block hole while tightening. If you let it slip and proceed with tightening - it could leak.Very happy with this heater - It is heavier made that other / similar heaters.
C**C
Good enough
Had to clearance the outer edge of the outside lip to allow it to pass the motor mount on install. Functions as designed
C**R
Perfect and works!!!
Awesome heater! Had to have professionally installed due to having a four wheel drive and could t reach it very well. The poor guy who did it caught it for quite some time. Yup, sure paid for it too! But it was worth it. Starts in zero degree weather with NO issues at all.
F**0
Four Stars
Small amount of cutting or grinding required for install on duramax keeps engine above 100 degrees
H**R
Fit 2002 Chevy 2500HD Duramax.
Removing old and installing new is not easy but can be done. New replacement part looked like original.
J**N
Four Stars
Good product at a good price.
G**P
Easy install
Works really good , fit my 2007 Chevy LBZ classic just fine, no leaks , good valve for the money
R**L
Perfect fit and works well
Duramax diesel truck
V**.
You have to drain the entire coolant system on a duramax!
Installed in my 2011 duramax. Fit perfect. Lots of work for such a small piece but well worth it.My old OEM one started to leak and it was time to switch it out.
ترست بايلوت
منذ 3 أيام
منذ يوم واحد