Viva Decor ABS Sock Stop (2.77 Fl oz, Red) - Fabric Paint for Non-Slip Socks, Bath Mats & More - Latex-Free, Water-Based, Washable - For Grip Socks DIY

I used this product to place vinyl beads and lines on my cold weather official's gloves to add tacification to the palms. Works like a charm and hasn't come off in use or in the laundry. Great product.

At first I didn't think this product worked. The instructions just said to shake well. Shaking well didn't cut it as the solution came out very liquidy. I'm glad I tested it before putting it on the bottom of my slipper. You need to shake this for a good 4-5 minutes until you don't hear anymore liquid moving in the bottle. Then, it comes out thick like it's suppose to and works great! Takes about 5 hours to dry fully, which the directions don't say either.

This has to be the WORST product I have ever purchased on Amazon … maybe even in general. I have ordered this twice, the first time the entire bottle was dried out upon delivery. The second bottle seemed promising at first but after a few squeezes the nozzle seemed to be clogged. I would shake it to dislodge the clog but it kept clogging with each squeeze. And then I squeezed too hard (apparently) and the whole top came off and the product exploded EVERYWHERE it was on my shirt, my pants, my shoes, my phone, my laptop, the wall, the table. There are absolutely no warning labels about the product possibly clogging and what to do if it does. My laptop keys are getting stuck and there’s residue all over the screen. Hopefully when it dries it will peel off but I’m not going to get my hopes up. If not I’m absolutely screwed because I need my laptop for work. This product needs to be redesigned, the bottle needs to be redesigned, and the instructions/warning label need to be redesigned.

I got this for two washable things I have yet to see companies produce with grips to apply to clothing: reusable breastfeeding pads, and reusable menstrual pads. In short, it works decently enough. I did need to apply at least 3 layers (air dried overnight between each layer) for it to be raised enough to not just sink into cushioned material, and I noticed that they fare better air dried after laundering (or tumble/machine dried with no heat). I used it exclusively on tightly woven polyester material and did not notice any leak-through or compromise of the fabric on the reverse side, and appreciated the opportunity to create my own designs and choose placement that works for me. I also liked that I did not notice it created any strange bumps under clothing. Four stars only because though it certainly created comfortable grip and appears to have good durability, it did not eliminate slippage, only reduced it.

This is a great product I love it. I put my grandsons initials on his socks. I purchased iron on dots they didn't work never washed or used they werecoming off. Then I purchased permanent markers horrible had to go over and over and over sucked

I applied this to the bottom of some knit slippers and it's not as sticky/non-slip as I thought it would be. It provides a little bit of traction but not as much as I was wanting. I wouldn't compare it to the non-grip socks that you can buy from the store but it does the job for the price I suppose. Also if you're applying bigger globs of it, it doesn't dry fully transparent. Instead looks kinda white.

I purchased this to try to use like silicon around the leg holes of bike shorts that didn't have any grippers to keep them riding up. It helped, a little, but probably wasn't worth the effort... that isn't it's intended application though, so I'm not holding that against the product. A couple months later I also used it to patch some flexible rubber in a different application, and it worked pretty well for that... again, not the intended application, just something I tried. It seems like it would work well on socks... I will say I haven't had any issues with it separating, hardening, or not working as intended. My tips are to SHAKE IT A LOT before using. Really really shake the bottle first. Then, before putting it on your socks (or whatever) squeeze some out onto a scrap rag. It will come out a little runny at first, but after that it applies thickly. Finally, place a piece of plastic, or maybe cardboard, underneath the fabric... It did bleed through just a little for me but having something on the other side kept it from being too bad and attaching the fabric to itself.

It goes on white but does dry fairly translucent. It was a little stuck in the bottle at first but after I got it open it worked well. I would say I treated 5-6 pairs of socks and have a little bit left. I just let it dry overnight and washed according to directions. You can definitely tell the socks are stickier after I applied it.

Producto es muy bueno. Uso para calcetines y zapatios tejidos. Recomiendo!

Molto utile,l'ho usato sia per ripristinare i gommini delle ciabatte,sia per trasformare le calze in antiscivolo

Didn’t work. Wouldn’t come out of the bottle.

Got this to put grips on my crochet slipper socks. Work perfect

Habe mir das Sock-Stop gekauft, weil meine Aero Rennrad Socken nicht halten und immer runterrutschen. Die Öffnung ist ganz fein, sodass man leicht entweder kleinere oder größere Punkte anbringen kann. Trocknet innerhalb 1-2 Stunden und wird dann komplett transparent (Farbe transparent). Hält super und tut was es soll!