Fireplace Blower for Osburn, Nordica Fireplace, Valley Comfort, Pacific; Rotom Replacement

Installs perfectly in a Regency F2100 wood stove. It has the same exact footprint as the original blower/fan.The original complete blower/fan assembly P/N 486-515Regency blower/fan P/N 910-157/PThe blower came without the (3) spade lugs terminals attached to the (3) wires, however the lugs were in a bag along with 3 wire nut connectors. The photo on the Amazon page is in error showing them crimped on. Just make sure to strip the wires back and use a crimping tool or pliers. Make sure the wires are securely crimped by tugging on them.I used (2) of the spade lugs for the RED (high speed)) & the BLACK (low speed) wires.Since the incoming WHITE (neutral) had (2) wires connected to the auto/manual switch I had to cut the WHITE wire going to the bottom switch and use a wire nut and connect that wire with the new WHITE wire going to the motor.Note: There were (2) wires on the bottom terminal lug of the auto/manual switch.Also the supplied (3) wire nut connectors are too small to get (2) wires in them. I used one that I had laying around. The orange one in the photo.Also there was no way to connect the GREEN (ground wire) since the blower mounting bracket was welded on instead of screwed on.I connected it to the mounting screw/nut on the blower. I probably should have used more star washers to make a better ground connection since it is powder coated.Testing:At first the blower noise was hardly noticable on high speed but after using for a few days it became more hissing sounding, which is considered normal.At least there is no metal grinding noise as it was before. The low speed is very quiet compared to high speed.Overall I consider it a good purchase, I actually bought another one as a spare.I noticed all the other replacement blowers do not have the correct mounting brackets, although they may work since they may magnetically attach to the metal enclosure. I can see L shaped brackets on the motor.

I ordered this Rotom R7-RB167 blower earlier this month from MN Warehouse, and received it 4 days later, and installed it the next day. Fast turnaround and decent packaging and it works well. I don't know if Rotom is OEM supplier for my Regency Hampton I300, but it fit, and works well. I wish it had metal fan blades, as I'm replacing one that had melted! For about $100 I will keep a spare on hand - the nearby Regency service dept wanted about $550 to supply and install a replacement ($350 for fan alone) so I'm ahead...Update: Feb 2018 - After 1 year in service, the blower functioned flawlessly last winter, and over half way thru winter / rainy season in the Northwest it has run about 18 hours/day x 7 days a week for months on end. I bought another spare because my fireplace & insert are primary heat source in the front of the house, and can't afford another melt-down of the plastic fans if embers get sucked into the blower chamber *again*. on low speed you can hear it, but its fairly quiet, on high speed, it is loud enough to turn up the TV volume or move to another room for a phone call. Decent price, reliable, and seems to be 98% equiv to Regency insert. Fit perfectly in I300 model.

I bought this blower to replace my Regency Hampton HI300 blower.Pros: It looks exactly the same and fit well in its place. It comes with three female connectors and 3 ceramic wing-nuts. The holes lined up, but you do have to move the grommets in the feet out in order to make it work. At first, I thought the holes weren’t lining up and then realized the grommets could slide.Cons: One of the feet of the blower was bent and we had to pry it back into place, and one of the wing nuts was shattered. We had to go purchase a male connector for the white wire. There was not a hole drilled for the ground wire so we had to drill one. When we turn the blower on high, it sometimes take a minute or two for the blower to get up to full speed.Conclusion: for the price, assuming it lasts, its worth it.

Very well made fan, powerful output. Kit comes complete with supporting wiring harness and adjustable switch. Put it into a Lennox wood burning insert that had insufficient heat circulation due to the squirrel cage blowers they included. This one will operate with the air output being either in the horizontal or vertical position. In my case I used this to push more air horizontally to the squirrel cages, which has amped-up the air volume coming from the fireplace considerably. Comes with velcro patches on one base side, rubber grommets on the other--you will have no problem with horizontal or vertical placement.Placement note--don't despair if it looks like it will not fit below your insert when you open the box and see how large it is. Your fireplace probably has (like mine) a corner on the lower right side that is a bit larger and allows you to slide this in lengthwise and turn to position the right way.

This product fit perfectly into my Regency wood burning insert when the old motor became noisy after 5+ years. Installation was a breeze and the unit operates like new - and very quietly too. Unlike some replacement motors this one has the proper orientation for the Regency straight out of the box, no need to take apart and re-position the motor/exhaust orientation. Comes with connectors, delivery was fast. Highly recommend this product.

So, the blower fan on our Regency wood stove insert had been showing signs of age for a while, getting increasingly noisy and rattling. When it finally stopped working entirely, I was wasn't sure I'd be able to find a replacement, since the stove itself is nearly twenty years old. Luckily, my search lead me to this item, which was indicated as fitting my wood stove model. It turned out to be an extremely easy installation, and the new blower is remarkably quiet and pushes a lot of warm air out into the room. A far better deal than having to replace the entire stove!

The fan fit right onto the old mounts with the exception of two of the holes which I had to drill. Moves lots of air and runs very quietly, Very pleased so far. I see there are lots of less expensive models out there and am not sure how they would compare.

It worked just like the original, maybe better, received in a quickly manner.

Until is much quieter than the original. Highly recommended..

pour $33.73 de livraison très longue et l orientation de le souffleurie n'est pas indiquer

It blows air and was a direct replacement for y wood insert. Will buy again.