Kryonaut - 1 Gram - Extremely High Performance

I recently used Thermal Grizzly Kryonaut (1 Gram) for my CPU repaste, and I’m impressed with the results. This thermal paste is clearly engineered for high-performance applications and demanding systems like gaming PCs, overclocked setups, and even consoles such as PS4, PS5, and Xbox.Application was smooth and straightforward—the paste spreads evenly and has a nice consistency, not too thick or runny. After applying it to my CPU, I noticed a significant temperature drop under load, which gave me peace of mind, especially since I push my system with heavy gaming and mining.✅ Pros:Extremely high-performance thermal conductivityEasy to apply with even spreadNoticeable temperature reduction on CPU & GPUIdeal for overclockers and high-demand builds❌ Cons:A bit pricey for the small 1g tubeBest results only when applied carefully💡 Tips:Clean off old paste thoroughly with isopropyl alcohol before applying.A pea-sized drop in the center usually works best for CPUs.For GPUs or larger dies, spread a thin, even layer for full coverage.Keep an extra tube on hand if you frequently build or repaste.Bottom Line:If you’re serious about system cooling and stability, Thermal Grizzly Kryonaut is worth every penny. It’s one of the best thermal pastes I’ve used, and I’ll definitely stick with it for future repasting jobs.

I bought this paste for 3 different devices: an Asus G20CB desktop, an HP Pavilion desktop, and a 2021 Asus G14 laptop. After verifying that the paste was authentic, application was pretty straightforward and easy since it came with 2 different nib/spatula tips for the syringe of pate.I basically run stock after removing the bloat, no overclocks or anything, but I still wanted to repaste due to improvements to temps. Because of that the 2 desktops didn't see much difference, 3–6-degree Celsius give or take for the CPUs and GPUs. And even now, it is still holding the same temps as it did underload as it did when I 1st repasted it.My G14 however did see a sizeable improvement from what it originally had; CPU saw a 13 degree drop and GPU saw a 5-degree drop. I can't really say if it was because the factory liquid metal application was botched or just old, but this paste does well enough to keep the CPU from going past 85 degrees since before repasting my highs would sometimes reach 100 degrees and prevents my fans from turning into jet engines. It did last a good 13 months before temps are starting to slowly climb, so I will need to repaste soon. Will probably try Hyronaught this time since others reportedly say that it is better for laptop use due to higher idle and heavy load temps.Overall, it is an excellent product (if authentic, BEWARE OF FAKES). Yes, it is expensive, but the performance results do speak for itself and the reputation that it gained as a go-to by known overclockers is warranted; but it is ultimately up to you how much you value that improvement and if it is worth the price. For me however, despite not being an overclocker, it was worth every penny since lowering those operation and idle temps is just another way to have my last longer.

I didn’t think this would make much of a difference but it dropped my temps 8-9c during benchmarking and stress testing my 14700kCons:Have to use the “icing the cake” method and smear it all over for the intel 13 or 14th chips and you barely have enough in the 1 gram tube to get it done. Was kinda sketchy but it worked wellVery small amount but at room temp was easy enough to spreadDropped temps during gaming as well but only by 3-5c which is still great but mostly saw results when pushing the system hard. I have a 360 AIO btwPros:Easy to useWorked well and came with spatulaDelivered overnightAllows me to push my system harder and safer

I’ve used the Arctic MX-6 before, and the Thermal Grizzly Kryonaut feels noticeably different. The consistency and application feel more like a high-performance thermal paste, and it gives me more confidence when using it on a higher-end CPU.It’s easy enough to apply with a little care, and it feels like a product designed for users who are looking to get the most out of their cooling setup.Compared with the MX-6, I would choose Kryonaut when performance is the priority. The Arctic is a very good all-around option, but Kryonaut feels more focused on high-performance applications.

This thermal paste performs well and does its job as expected. Temps improved compared to older paste and it spreads easily during installation.The only downside is the amount included — the tube is very small, so it’s best suited for a single application or quick job. Overall, good quality paste, just not much of it.

Let me preface this whole things by saying that Kryonaut is a really good thermal paste for cpus. It helped decrease my tdie temps by a massive margin (over 5 degrees), and thermal conductivity is impressive while being easy to apply. But putting it on gpus... let's just say I bought this before I had actually done proper research because I had heard so much good about it. *sigh* time for the long boring essay...**TL;DR: pump out is bad for long term thermals and this has especially bad pump out. anything with IHS (cpu) gooood, anything without (delidded cpu, gpu, socs, laptops, etc.) baaadA lot of people tend to think thermal paste is either all the same or only look at conductivity. However, with this paste, I figured out the hard way that thermal paste is way more than heat dissapation. Pump out occurs through many repeated cycles of rapid heating and cooling and causes the thermal paste to dissipate outwards and leave little to no paste on the core, usually through a long time period (3-10 years, depending on quality). This is more prominent on gpus as those have no ihs and tend to heat and cool more violently than cpus do. Thicker, more viscous thermal pastes are less prone to this. Unfortunately, this thermal paste in particular has especially terrible pump out because it's thin and watery.It worked WONDERS on my cpu as I mentioned earlier. An already great temp of 65c or so fell to 55-60 while gaming in ambient 22-27c. No pump out issues and it stayed like this until I changed coolers.On my gpu, it worked well - at first. 55c with 8 degree delta between hot spot and core. It almost instantly (within a month or two) started to have bad deltas (meaning pump out was causing die to heat up in certain spots more than others). Delta was around 8c, then slowly rose to 15c+ (worst I saw was 20c) and core temp also rose from 55c to 60c to 65c. When I replaced it with a thicker, much more resiliant thermal paste (thermalright tfx), it has been consistently good at ~57-61c and 10-12c delta for the past 3 months.All in all, it's a great paste that has amazing thermal conductivity (although that standard is nonexistent). your cpu temps will drop if you are replacing old or otherwise low quality thermal paste. However, it's a lot of money for the amount of paste you get, and being the way it is, it is not designed for direct die contact, so bear that in mind. Be aware that different thermal pastes have different use cases, and this is not for gpus. If you want that from thermal grizzly, there is hydronaut and liquid metal (though I have not used either). I personally just recommend arctic mx5 and tfx and maybe noctua nt-h2.

Edit - I added some images above to show the contents of the package. I have purchased this paste several times now. Best non-conductive paste on the market hands down. (End Edit). I replaced MX2 thermal paste with this, temps went down from 18C idle 32-36c under load on FX6300 with a GTX 1060 on Hyper 212 Evo to 15C idle and 30-34C while gaming. Prime95 before hit 42C now it tops out around 38 hit 40C one time for a second. My 212 Evo has Duel fans in push/pull config. Great paste. Bought it just to try it out before using it on new build I7 7700K and MSI Z270 Gaming M7 motherboard is on the way. Edit 9/2020 - Many years later and this is still the best non-conductive Thermal Paste you can buy. I’ve since got really big into PC gaming and building PCs for people/clients. I currently have new full tubes of Cooler Master Masterpro Gel Nano, Noctua NT-H1, and Artic Silver 5 which is the only one of the bunch that requires a setting time. These are all great pastes. Most people would say the Noctua NT-H1 is the best but from my experience out of the ones listed the Masterpro Nano performs just a touch better but isn’t as easy to apply. I recently upgraded my system. Ryzen 3800XT, RTX 3080 on the way to replace RTX 2070 Super, 32GB G.Skill 3600mhz CL 16 ram, Asus Prime X570-Pro board, several ssds, two NVMe drives one Gen 3 and one Gen 4, a single 500GB Western Digital Black HDD I’ve had since 2013 to use to store backups and gaming videos/pics, a EVGA G3 Supernova 850 watt 80+ Gold Fully Modular PSU, an internal WiFi/BT 5.0 PCIe card all in a Cooler Master Masterbox NR600 Mid Tower airflow focused mesh case with a glass side panel. My case has all PWM premium Noctua Chromax fans. 3x120mm front intake, 2x140mm top exhaust, and 1x120mm rear exhaust. My CPU cooler is Noctua N-DH15S replaced with duel 140mm Noctua Chromax Black/Blue fans, and the Noctua Chromax Black/Blue heatsink covers to make it look nice. Overall I’d say I have a pretty upper mid/high end sustem. I game at 1440p max settings 100+ FPS regardless of the game. I have all these pastes here and I STILL ordered another tube of Thermal Grizzly for my processor. Nothing wrong with the pastes I listed but this pastenhere is amazing and out performs them all. This is in tons of benchmarks just hit up google. It requires no curing/setting time, is non-conductive, easy to apply, and will give you on average an extra 2-4 degrees lower temps on your cpu. That might not sound like much but when you overclock everything and your system draws a lot of power over the course of months, years, and long gaming sessions having a processor that runs cooler is always better. Not only does it allow it to potentially overclock higher as well as boost higher and for longer. But it also if you run your cpu stock allows your cpu cooler to have an easier time cooling it thus your fans can spin at a lower rpm for the same results which equals less power and a silent system. Overall it’s a bunch of minor things that depending on the user might make a nice difference in their setup. For me spending 8-9 dollars to have the best possible paste I can buy is a no brained. A single 1 gram tube is enough to do 3 applications easily. With my mentioned system above using my case which has great airflow with my Noctua N-DH15S in push/pull my CPU runs in the lower 30c idle, around 50-55C in games maxed out no matter how long I play, and using Prime95 max power max heat stress test after 20 mins which is enough time to hit its top out point it peaks at 68C. That’s on a Ryzen 3800XT that’s set to run wide open with all I could get out of it. You will not fine a better non-conductive Thermal Paste so if the best is what you’re after proceed to hit the buy button.

Love it, temps came down a bit. But the paste being in this tube made it super easy to put on the cpu with the spreader tool

Ich habe die Thermal Grizzly Kryonaut zusammen mit meiner neuen ARCTIC Liquid Freezer III Pro 240 A-RGB für einen Ryzen 7 7700 verwendet. Wer Wert auf niedrige Temperaturen legt, kommt an dieser Paste eigentlich kaum vorbei.Anwendung & Konsistenz: Ich habe die klassische Punkt-Methode angewendet. Die Paste lässt sich am Anfang sehr gut dosieren. Ein kleiner Tipp: Wenn die Spritze fast leer ist, wird es etwas kniffliger, da die Paste eine recht hohe Viskosität hat und dann gerne mal an der Tube "kleben" bleibt. Mit ein bisschen Geduld ist das aber kein Problem. Ein Spatel liegt übrigens bei, falls man sie lieber verstreichen möchte – ich habe ihn jedoch nicht benötigt.Ergiebigkeit: Die 1-Gramm-Spritze ist zwar klein, aber ergiebiger als man denkt. Ich konnte damit zweimal eine CPU bestreichen und habe immer noch einen kleinen Rest als Reserve übrig. Für den normalen Gebrauch reicht diese Größe also völlig aus.Performance: In Kombination mit einem guten Kühler liefert die Kryonaut ab. Ich habe im Vergleich zu meinem alten Setup (Luftkühler + Standardpaste) massive Temperaturverbesserungen erzielt. Die Paste trägt definitiv ihren Teil dazu bei, dass die Hitze schnell und effizient an den Kühler abgegeben wird.Fazit: Ja, die Kryonaut ist etwas teurer als herkömmliche Pasten, aber für mich ist der Aufpreis absolut gerechtfertigt. Wer ein System für Gaming oder Overclocking baut, sollte an den paar Euro für die Wärmeleitpaste nicht sparen. Klare Empfehlung!

super produit

Detta är den i särklass bästa kylpastan jag använt. Sänkte temperaturen ett par grader mer än motsvarande kylpasta som köpts från Inet.Rekommenderas.

Es la mejor pasta térmica en el mundo!! Me logro bajar 12°c, vale totalmente la pena el costo, ahora mi procesador anda muy fresco. Comprenla, es lo mejor en el mercado.

I expected nothing less10/10 cooling for liquid or air coolersGreat for overclocking with reasonable tempsPrice is a bit high thoThe Market itself selles it 100 pound cheaper