Master Lock TUO0105T Tulip Door Knob with Lock, Antique Brass, Pack of 2

Looks great and easy to install!

If you're using a power driver - Start everything by hand. Don't over-tighten the bolts, it may cause the body of the knob to tighten unevenly resulting in sticky operation (latch won't snap back).Also remember to use lower speed to move the bolts and be careful not to nick the doorknob with the driver bit during installation -- it helps to have a magnetic driver extension to get into the bolts diagonally, if you will, with respect to the axis of the knob.Doorknob : be careful not to install the latch upside down, it has an up designation.Also, I found that the latchset fits better with the 'floating sleeve' on it, and fits snugly.Latch : However, during one installation, I accidentally moved the spindle cam somehow and may have misaligned the latch hardware, because as I was inserting the latch I depressed the strike, and as the latch was moving past the floating sleeve into the 1" (horizontal) hole in the door, the floating sleeve became misaligned ( there is a small groove in it that allows the insertion ) and moved one of the levers as I forced it past the sleeve. Hrrmmmph. The handle wouldn't turn all the way left from the outside. The strike didn't come all the way out. I had to disassemble it.Once I disassembled it - back to the directions - I was able to work the backset directions to adjust backset distance a couple of times and work the spindle cam as i depressed the srike, to try to fix the spindle cam which had the misalignment. Messing with the backset distance and the cam fixed it. Reassembled and installed as usual perfectly.So be careful when installing the set, that you don't make my mistake, and make a faulty installation. Don't touch the backset or the spindle cam during insertion.Deadbolt : as long as you insert the torque blade horizontally you should be good to go (once again follow directions).Strikeplate : on one installation, the door was so misaligned, that I couldn't use the new strikeplate, the hole was too small. I had to keep the old one which was a larger hole.Directions provided for this item were good.Remove the key code label from the packaging so you can order duplicates, and to protect security.Shipping was On Time - Arrived at 5:30pm the Day of Delivery

This entry door lock was easy to install. After many months it still looks great and works very well!

I needed to replace my old lock because the deadbolt was sluggish and I didn't want to have two separate keys (so I ordered this whole set).The Master Lock TUCO0605 came in many pieces in a hard shell plastic packaging. To my surprise the manufacturer included 4 keys (all the same).Installation was quite simple and took me about 20-30 minutes. Tools needed: Screwdriver, Phillips screwdriver and a tongue. Maybe you don't need the tongue but my lock had a steel frame/plate on the outside with a hole for the old doorknob (which had two 'noses' that didn't fit the two screw-stems of the new one so I had to bend them inwards). If you don't have this metal plate on your door - forget about the tongue.The deadbolt has a key side and a lever to turn around (lock/unlock) on the other side (the side you can not see in the official product photos). You can actually reverse the two sides so it doesn't matter in which direction your door opens.The doorknob unit also has a key side and a lever (lock/unlock) on the other side. Same as with the deadbolt, you can reverse it.The key works the following way on the doorknob unit (same with the lever on the inside - just reverse):* Turn the key 90° clockwise and the doorknob is locked. You cannot turn it anymore. If you close the door now you could lock yourself out.* Turn the key 90° counterclockwise and the doorknob is unlocked. Now you can turn it. In this mode you can open and close the door without a key.* Turn the key ~180° counterclockwise and the doorknob is unlocked and the door opens as if you would turn the doorknob.[* directions assuming the hinges are on your right when standing outside looking at the door]QUALITY: Pretty good for ~$25. It's solid and about the same quality feel of every other doorknob I have ever used. I guess you could buy better quality with more money for an even smoother key fit/movement, but I'm totally satisfied. The doorknob is a tiny bit loose (you can rattle it a bit if you like), but for that price I don't expect it to be precisely crafted as a Swiss watch.

Okay - I needed to replace the deadbolt and doorknob on my front door and this looked like the perfect replacement.First of all, the lock and deadbolt are solid and I don't have any complaints about the locks and mechanisms. My big complaint is that these do not fit all sized doors as stated. In my case, when I took off the old door knob to put the new one on, the hole in the door to accept the new knob mechanism was too small for this knob. The knob cover on the key side of the mechanism has a lip on the inside that faces the door hole. You can't see it in the product photo because it faces away from you in the photo. It sticks out about 1/8-inches. The door hole has to be at least 2-inches in diameter to accept this lip or the keyhole cover won't fit flush to the door. My door had a 1.5-inch keyhole so the knob cover lip would not go into the hole. The lock mechanism fit in fine, but the cover would not come up flush but stood out from the door a good 1/8 inch. I did not have a keyhole bit for my drill that was 2-inches in diameter, so I had to hire someone with the right tools to come and drill the hole out and install the product.The deadbolt cover did not have that lip on the inside, so it fit the old 1.5-inch deadbolt key hole in the door just fine.Once the hole in the hole was widened, the doorknob fit fine and works fine and I have no complaints about it's operation. It just cost me an extra $20 to have someone with the right tool come over to my house and make the hole bigger. This is just a warning to all to make sure your door has at least a 2-inch key hole in order to accommodate this knob and mechanism.

Easy To Install , Sturdy at Low Price

Great quality & value

nice product. i bought it for my bedroom door and it works good.. nice appearance too.. the only thing is that i need too widen the hole in my door because i think its designed to my old door knob which has smaller hole..but overall its great and would recommend it..

I bought two packs of the twin pack to use indoor. The two sets of keys (eight keys in all) are identical and compatible with all four locks which is great since I do not have to carry keys around and no need to copy any for additional confusion!!! However, the locks do not appear to stand outdoor tough jobs or high security jobs.

Item as described. Easy install as just replacing a lock that broke. Great product at great price. Fast 2 day delivery and a happy customer!