eSUN ABS+ Filament 1.75mm 3D Printer Filament ABS Plus Dimensional Accuracy +/- 0.05mm 1kg Spool (2.2lbs) 3D Printing Filament Light Blue

I've used a variety of eSun filaments at this point, mostly PLA and PLA plus, this is the first ABS I've gotten from them and the first ABS I've ever printed with and let me tell you, this company really has their filaments down pat. Everything I've ever printed with eSun filaments has turned out phenomenally. And with this ABS, I truly expected a fight. Its supposed to be more difficult to print with due to warping and all that good stuff, but this ABS+ formula has everything you could desire for the perfect print. Its strong, has a beautiful matte sort of finish that makes it soooo much nicer looking than black PLA, its temperature resistant, AND holy cow is it easy to print with! I ran basically default profiles for everything in Orca and didnt have the slightest problem. Even printing without a brim, raft, or skirts, my first few prints went off without a hitch, which truly surprised me after fighting SOOOO hard with PETG right before this. I will say that ABS is traditionally considered to have some hydroscopic tendencies from what I've read, although not nearly as much a PETG for instance. I can't really say I experienced that with this filament. To be entirely honest, I threw it in the drier before hand anyway. But with PETG it seemed like if I didnt keep the drier cranked on full blast 24/7, it was so wet by the time you came back to print it was basically unprintable (depending on the brand). With this ABS, I forgot to turn the drier on a couple different times and never really saw a huge difference at all. On some layers it would seem to get a little flakey, if that makes sense. Almost as if it weren't laying down in a perfect layer or something. But it was, check out the photos for proof. It truly resulted in nothing but fantastic results on every print despite my observation of the strange flake that seemed to come off some of the solid infill layers as it printed. As I said, I'm rather new to this, so maybe all ABS just does that. I did have to add a brim to one print that warped a bit because it had such a small footprint on the buildplate AND because that side of the plate ended up slightly out of level when I checked it. I re-leveled the bed, added a small brim, and the next print went off without a hitch. Finally, ABS has a reputation for smelling horrid... Though while this filament does give off a faint "burnt plastic" kinda smell after you've been printing it legit all day, to me the smell wasnt potent enough to bother me in the least. Then again, my nose may be screwy, cause I can inhale resin fumes like its going out of style too without the slightest side effect. For the time being at least... lol. (I do use PPE while handling resin, Im just pointing out that my nose doesnt seem to be quite as sensitive to it as other people's does.) For the newbs out there like myself who have never printed in ABS before, I have added my basic slicer settings via screenshot, but if your working in Orca particularly, your basically fine to go with the default ABS profile and the default for your printer and nozzle. I would suggest turning the speed down just a hair, but it prints fine at full speed too! And MAKE SURE your cooling settings are dialed in or you risk cooling too much and causing warpage. Same goes for printing with an enclosure, it is ABSOLUTLE NECESSARY with ABS to avoid warpage. I would also recommend using a PEI plate for great adhesion, personally I used a textured PEI plate and had amazing results with minimal failure. I for one will be purchasing ABS from eSun again in the very near future, and in all honesty, I don't believe I'll go back to printing black in PLA at all unless I just need something with a gloss finish to it. This matte finish on the ABS from eSun is amazing, and I love it, and I want more of it. Haha.

Good value, nice colors, no clogs or tangles. Works great with my prints,

Mała kurczliwość

Ich bin komplett zufrieden mit dem eSUN ABS+ Filament. Ich nutze es auf einem Bambu Lab A1 in einem selbstgebauten Gehäuse, gesliced mit Bambu Studio – und es läuft absolut problemlos. ✅ Hervorragende Druckqualität – saubere Layer, sehr gute Haftung, kaum Warping. ✅ Einfach zu verarbeiten – auch bei größeren oder längeren Druckaufträgen stabil. ✅ Material ist robuster und weniger spröde als normales ABS. ✅ Lässt sich gut schleifen, kleben und nachbearbeiten. ✅ Spule kommt ordentlich aufgewickelt und trocken verpackt. Ein rundum zuverlässiges Filament für funktionale Bauteile – ich werde es auf jeden Fall wieder bestellen. --- Title (English): Reliable ABS+ Filament – Prints flawlessly with Bambu Lab A1 (English): I'm completely satisfied with the eSUN ABS+ filament. I'm using it with a Bambu Lab A1 in a custom-built enclosure, sliced with Bambu Studio – and it works flawlessly. ✅ Excellent print quality – clean layers, strong adhesion, almost no warping. ✅ Easy to handle – stable even with large or long prints. ✅ Stronger and less brittle than regular ABS. ✅ Great for sanding, gluing, and post-processing. ✅ Spool arrives neatly wound and well packaged. A truly reliable filament for functional parts – I’ll definitely buy it again.

printed at 40m/s, 250 degrees. Plate at 105 degrees. Unbelievable result. My printer was Troodon 400 semi pro level.