Ultra 16.8w/mk Thermal Putty for VGA GPU IC Processor Rapid Cooling Thermal Pad Replacement Heat Blocking Putty (100g)

i have years of experience refurbrishing cards, this product is very difficult to manage and to apply. online there are some tutorial bun honestly i don't raccomend to spread things everywhere without any minimum of diagnostic with your fingers. Be informed that 20g are not enogh to cover the VRMs and ram chips of a full card. (in my case a 3090) i raccomend to use oven paper and place a specific amount on it and roll them since u don't reach a proper thinkness of each related thermal pads you are going to replace and cut with a cutter the portion that u need (is really time consuming but the final result will be better and without messing the pcb). Spreading the putty without a control is going to cause imperfection causing high pressure spot and bending the pcb, since we don't want to destroy our card pay attention.

Best in class performance at a better value than TG Putty Pro. The putty is easy to apply if you just use your hands (recommend using the finger covers) and apply liberally. The dry nature of the putty also helps when reapplying my thermal paste as it stays put and doesn't drip everywhere when I pull off the heatsink. 5/5 this is my new go to putty for any pad based applications because of performance and value for the amount given.

it is incredible how well it works, best product out there, a year later after installing and the paste is not even close to dry

I got tired of getting worried about buying the right size thickness of replacement pads after buying two XFX RX 7900XTX Merc310 video cards I wanted to repaste with MX-6 on the GPU die. I never trust OEMs on using premium thermal paste or pads, and I was right. One card had too little paste, the other bubble areas from pump out. Forget using the spatula for anything other than just grabbing a bit of this stuff out of the bottle, go for full coverage rubber, nylon, whatever gloves. I learned it's best to start the flattening process yourself with a single finger. Use the spatula to cut off excess, but be ready for this stuff to come apart and get stuck to your gloves when you least expect it. Cleaning the surfaces with 91% or above isopropyl alcohol helped it to stick especially on the VRAM. **One major note. Expect to use 1 full bottle of the larger size of this stuff per graphics card (GPU). Each VRAM row in my card was 8GB, so 3 full rows of VRAM for the 24GB. Add in the capacitors, ICs, other originally covered with pads and I can guarantee you it's best to have a full large bottle versus 1 small bottle per card!!** it was worth it though. The VRAM temps alone from this stuff dropped about 8C without load and almost 10C under load. Was it perfect application..probably not but who cares.

I have a 6600xt and like most 6000 series amd gpus mine ran pretty hot especially on the hot spot which is on the pcb and not the die on these cards. I had tried repasting and repadding twice and no change in temps. I used this putty on the pcb and tg duronaut on the die and my temps dropped 15c on average. As for working with it I recommend gloves as it leaves behind a residue but it was easy to use and did not make a mess.

I was on the fence about buying this since $50 is not exactly cheap for me. I also definitely applied too much as it squeezed between the heatsink pipes but man this paired with PTM7950 my cpu temps dropped by a whopping 20C on average while the gpu dropped 7-10C. I’ll be looking into overclocking now since I have the wiggle room. Use the finger glove things it included since when you take it out the jar its chalky but when you give it shape with your fingers before applying it warms up and is a bit more pasty. What an amazing product!