2-Pack 1-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet Pass-Thru Support)

Works well. No issues.

Purchased: Cable Matters 2-Pack 2-Port HDMI Wall Plate in White (4K UHD, ARC, and Ethernet pass-thru support)Review: Works great, looks great, easy to install. Can't speak to 4k/HDR though as we don't have any 4k/HDR media devices.That being said: most bad reviews I see do not specify what cable or length of cable they are using in-wall, so I'm hesitant to say the plate "wouldn't work" for 4k/60FPS. My very short run ended across a bedroom up needing to utilize 35' of cable which will not support 4k @ 60FPS. I think any CL3 cable you are going to find that says it supports 4k @ 60FPS is going to max out at 25' (and it's risky at that length). With the high bandwidth needed for 4k, you really should be trying to place this devices as close as possible to your TV or projector. Even if you were just going up a wall under a TV I'd expect your entire setup to use about 10' of cable. Most recommendations to get 4k/60fps/HDR will say keep the cable length to under 3-6' max so introducing these plates plus three additional cables between all your devices you are already going over (plus lots of connectors to cause problems).TL;DR: It's all about bandwidth. Longer cables cause losses with reduce how much bandwidth you can use (high-frequency losses). I wouldn't recommend wall plates for 4k @ 60FPS unless you are talking about a very short run in-wall. Verify all of your cables are not something you've had lying around since the XBOX 360 days. Above all: always test your setup out before doing an install.

Worked very well. Didn't had any issues after install.Quality are A+

These are nice low cost wall plates with built in HDMI plug / pigtail. The screws supplied have heads too tall to allow the wall plate to sit flush with wall, so you'll need a lower profile screw or to grind the heads of the ones supplied if you're particular about the appearance. Once installed, they are a little weak when pushing in a HDMI connector, and I'm glad they are a permanent installation as I'm not sure they'll survive many cycles of pushing and pulling on them.

It just works!We used this for connecting HDMI inputs to our Teams Room setup. I couldn't be happier with how it turned out.

Son mejor de los que esperaba. Productos muy buenos

Great product for connecting HDMI cables inside a wall. It makes for secure connection and effortless connect-ability.

The cable end did not fit in the white plastic without trimming as you can see from another review's pictures.Instead of using a snap in keystone like most others, this one uses a short cable that needs to be screwed into the plate with some very small screws. Luckily I had a small enough phillips but I doubt most folks would.Insertion of an HDMI cable into the jack was difficult at best. I installed 2 of these and had the same issue with each. Had 12 others ordered and I cancelled my order.Edit: Upon first use, signal kept going in and out. Replaced them with a high quality set. No further problems.