Cooler Master Q300L V2

So this q300l case was released by cooler master in 2018 This Case was q500l 2019-2020 predecessor This case has holes in top, front and bottom I had 5 fan laptop cooler on which this Case is sitting right now, my laptop had fan issues so now it's used for PC case cooling I have attached 2 arctic fans 140mm 1600rpm and 120mm ,1200rpm in front for intake 2 coolermaster fans one for exhaust (xtraflow 1500rpm) backcand one for top ( 200-1000 rpm) 1 circle fan (1000-1200) rpm My PC temp with just one exhaust fan was around 45-55 during normal usage and CPU temp was around 64-74 degrees on normal to heavy load and gpu temps were 50 - 60 degrees CPU fan was spinning at 1500 rpm max After bumping up AMD wraith Cooler fan to max fan speed of 2600 rpm in bios settings, my CPU temps went down to 50 degrees. After installing all the fans, My case temps are 36-39 degrees My CPU temp is at 42 degrees normal and at 57 on load. If your buying this case get at least 2-4 fans You can 140mm fans or radiator in the front only On top only 120mm can be attached properly I could be wrong depends on brand and size of 140mm fan My arctic fan screw holes weren't able to match on top of the case. The magnetic dust filter on top and front can be cleaned easily. The side panel is acrylic, fingerprint magnet. 2 USB 3.0 jacks in front Mic and headphones Jack with HD audio but can only do 5.1 channel not 7.1. I had to attach my 7.1 channel headphone in the back Cable management very good Lot of spaces in the back. If you have radiator then your CPU temps will get better than mine . This case should cost around 3500 rupees But I had no choice but pay up 4500 rupees Cuz it I needed it urgently. This pandemic has really screwed PC enthusiast when it comes to pricing of PC components. 4/5 My PC specs AMD 1300X 3.8ghz (2018) Sapphire pulse RX580 8gb OC lite (2020) 😑 Ballistix red 16gb (2020)😑 Cooler master 550 mwe psu (2018) Acer vgo monitor 144hz LG monitor 75hz

My experience: This cabinet has way too many perforations on top, front and bottom. It's difficult to have positive or negative pressure maintained inside. Cooling is affected. So I cut out black paper of the size of the magnetic panels and sort of sealed the top completely, front partially (open enough for front fan to work) and bottom partially (open enough for SMPS fan to work). And I have an impeller fan at the top rear that throws out the heat. This system works very well for me as my chassis fans are at just 1000RPM and ambient motherboard temp is around 38 degrees C. While gaming, the heat from my RX580 is ejected quite well too. GPU temps reach max 72 degrees C. The LED light is added by me and doesn't come with the case. Cable management inside is decent, but could have been better. It gets a little cramped between the mobo and right panel. You can mount up to four 2.5" or 3.5" drives. Front panel has two USB 3 ports and are as fast as should be. The removable dust filters are very helpful. Overall I'm satisfied with this one.

good

Just received the product today. I needed a small sized cabinet to be kept sideways against the wall and this cabinet size is just right for me. Moreover, i like the modularity of changing the position of the switch on the sides. Build quality is excellent and is light enough to be handled easily. Airflow and heat management is excellent due to the netted structure of the panels; however, it will need frequent cleaning of duats on the inside (im thinking of blocking some parts of the net under the magnetic covers using cardboard as im not a power user and wouldn't heat up much anyway). Wires can be neatly tucked away. Very happy with it!

not recommended to pc gamers or pc stress runners , no heat flow... psu blocks graphics card breathing area... rest all pro gors into drain.. when gpu temps goes up...so i recommend it for showoff ppl... practical its useless...dust collector

So afar so good.i loved it

Compact, yet components fit in easily, excellent design. Not easily available in market.

Value for money

グラボやCPUクーラーの制限がほぼ無いMicroATXケースの中で比較的小型というのが選んだ理由です。 奥行きと高さがほぼ同じなので横から見ると正方形に見える感じです。 海外レビュー等では冷えないケースと言われてるようですが、わざわざ小さめなこのケースでハイエンド構成にする理由もないのではと思います。 前面に12cmファン二つ追加して（14cm2個付けれます）5700XとRTX3060のミドル構成で組みましたが、メッシュなだけあって冷却にはまったく問題ありません。 気になった点としては、元々付いている後部ファンが３ピンのものでPWM制御ができない点、それと前面や上面はメッシュですが、取り外しできる構造ではないので作業性が悪い点です。 それ以外は電源ケーブルの取り回し（裏配線）等もやりやすく簡単に組み立てることができました。 メッシュケースではASUSのAP201という強いライバルがありますが、あちらより一回り小さいという点、電源を標準的な後部取付にする点がいいところだと思います。 十分に満足できるケースでした。

1) Cable management that does not suck, that's a big advantage 2) Can be placed under the monitor on the desktop, rubber pieces on the long side 3) With 3 PWM-driven chassis coolers it is a silent beauty 4) Overclocked graphics card temperature is below 65°, that's very nice airflow 5) The side panel is acrylic, not glass, which is so so, but pretty fine for a budget setup 6) Buttons and USBs can be rebased at any side, but I just kept them as-is 7) Very careful and lovely use manual, showing all necessary addons for different setups 8) Loved the included rubber pieces for easy placing of the SSDs Would definitely recommend it!

Goede kast met aardig wat mogelijkheden! Had zelf een kast nodig die niet te veel ruimte innam en niet al te duur was. Ik ben positief verrast.

O gabinete é ótimo e super bonito, o que mais me chamou atenção dele foi o design super compacto e a versatilidade de usar, mas apenas de ser bonito, ele tem os seus defeitos. O acrílico é super fácil de arranhar, enquanto eu estava mudando as peças do meu antigo gabinete para esse, eu deixei o acrílico encima da minha cama com todo o cuidado do mundo, porém, quando eu fui fechar o gabinete com o acrílico, eu vi um pequeno arranhão no canto inferior direito, de início eu não dei muita importância, mas com o reflexo da lâmpada do meu quarto eu achei vários e vários pequenos arranhões que só podem ser vistos na luz, eu simplesmente não entendi o que causou aquilo, já que eu tive o máximo de cuidado possível, mas para quem vai comprar esse gabinete, cuidem do acrílico! E de resto ele me agradou muito, acho incrível como a Cooler Master consegue fazer excelentes gabinetes com preços incríveis. Apesar de ser um gabinete M-ATX, tem como você colocar até 6 fans de 120mm nele que eu achei super top e bacana. Recomendo d+.

Ottimo case, non pensavo che spendendo poco più di 60 euro potessi avere un gioiellino simile, le dimensioni sono ridotte ma l'airflow è eccellente a patto di acquistare qualche ventola aggiuntiva in quanto abbiamo solo una 120 sul posteriore che fa comunque egregiamente il suo dovere. Supporta schede madri mini-itx e micro-atx (il mio caso) e dentro ci sta tutto. Come si vede dalla foto ho installato una GPU bella grossa, una asus dual 6700xt lunga 30 cm e un dissipatore bello generoso, un cooler master 212 alto 16 cm (ci va a pelo quindi controllate bene l'altezza del vostro dissi prima dell'acquisto).Il cable management è abbastanza agevole soprattutto in relazione alle dimensioni ridotte. Per quanto riguarda la PSU ci va un normalissimo ATX mentre per i dischi entrano tranquillamente due ssd da 2.5" e un HD da 3.5" ma il suo posizionamento sul fianco destro del case non mi convince appieno per motivi di mancanza di areazione. Due filtri a calamita con una bella trama a nido d'ape sono posti sul front e sul top mentre un terzo e posto alla base. L'unica pecca a mio avvisono è la "placchetta" dei pulsanti di accensione/reset e delle prese usb che sembra essere un pò fragilino ma posizionabile su tutti e 4 i lati del pannello.Il pannello laterale è in plastica, fosse stato in vetro temperato sarebbe stato veramente il top anche se a questo prezzo forse sarebbe stato pretendere troppo. Se cercate un case bello esteticamente esteticamente e curato nei dettagli non posso che consigliarlo.