This is solder with flux core. Voltage has nothing to do with it.

معلومات عنا

خدمات العملاء

دعم العملاء

الوصول الإقليمي

القانونية والسياسات

اجتماعي

احصل على التطبيق

قم بتوجيه الكاميرا لتنزيل التطبيق

Customer support

We're available 24/7 to help you!

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm, 50g)

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm, 50g)

Q: What kind of soldiers can work for bikes

This answer is for those who want to solder aluminum tubing, to construct bike frames. The quick answer is no. Maiyum solder is for electronics. The solder you want can be found by searching for this in Amazon: 50 Pieces Aluminum Welding Rods 0.08 x 8 Inch Universal Low Temperature Welding Cored Wire Brazing Rod Tube for Electric Power, Drill Tap Polish and Paint . You will need a torch that can burn MAPP gas, and the proper PPE such as welding gloves and a fixed face shield.

Q: How do you solder. Do you put the solder on the iron than run over the wire or it should just melt on the wire without the iron melting the solder?

Solder follows heat, but it's important not to burn off all of the flux before it gets to where it needs to go (flux removes oxidation, which allows the solder to make a strong molecular bond with the surface). Putting solder on the tip of the iron first is a guaranteed way to burn off the flux in the solder before you put it where it needs to go. I typically touch the iron to where I want the solder to go, heat the connection, and then bring the solder in to either touch the same joint. On wires the iron will touch the opposite side as the solder - so the solder flows through toward the heat of the iron. In some applications the connection is too small, so I touch the solder to the iron as close as possible to the connection. If I ever need to apply solder to the iron first and then bring it over to a connection, I use a flux pen or paste flux to coat the connection before soldering it.

Q: Is this stuff magnetic or will it attract magnet?

This solder wire has no magnetic properties, but since it contains tin it is a paramagnetic material. The attraction to magnets is very low and should pose no problems when used in common electronic applications.

4.6/5

معرّف المنتج: 725857069

معاملة آمنة

يُشترى معًا بشكل متكرر

MAIYUM 63-37 Tin Lead Rosin Core Solder Wire for Electrical Soldering (0.8mm 50g)

SRA Solder 135 Rosin Paste Soldering Flux For Electronics, No Clean Flux Made for Lead and Lead-Free Solder Circuit Boards and Copper Electrical Wire - Safe Clean Residues with No Goopy Mess (2oz Jar)

Liquid Solder Flux Dropper (30 ml/1 Oz.) I RMA Liquid Solder Flux I Soldering Flux I Electrical Solder I No Clean Liquid Flux I Rosin Flux I Soldering Flux for Electronics I Lead Free Liquid Solder I

الوصف

المواصفات

Brand	Jumpbule
Model Number	JF850
Product Dimensions	5.51 x 3 x 5.51 cm; 54.43 g
Are Batteries Included	No
Item Weight	54.4 g

لديك سؤال؟ انظر ماذا طلب الآخرون

What kind of soldiers can work for bikes

How do you solder. Do you put the solder on the iron than run over the wire or it should just melt on the wire without the iron melting the solder?

Is this stuff magnetic or will it attract magnet?

Is it dual voltage?

الأسئلة الشائعة

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

بوجا ر.

خدمة العملاء تجاوزت توقعاتي. مثالي لشراء المنتجات التي يصعب العثور عليها.

منذ أسبوع

أنجالي ك.

جودة المنتج رائعة. بالضبط ما كنت أحتاجه لعملي.

منذ شهر

عرض جميع مراجعات ترست بايلوت

تسوّق عالميًا، ووفّر مع Desertcart

قيمة مقابل المال

أسعار تنافسية على مجموعة واسعة من المنتجات.

تسوّق عالميًا

نخدم أكثر من 300 مليون متسوق في أكثر من 200 دولة.

حماية معززة

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

ضمان العملاء

خيارات دفع موثوقة يحبها المتسوقون في جميع أنحاء العالم.

تطبيق Desertcart

تسوّق أثناء التنقل، في أي وقت وأي مكان.

ترست بايلوت

الثقة 4.5 | 7300+ مراجعات

ميرا ل.

معاملة سلسة ووصل المنتج في حالة مثالية.

منذ 3 أسابيع

فرحان ق.

كان وقت التوصيل ممتازًا، والتغليف كان آمنًا.

منذ شهرين

عرض جميع مراجعات ترست بايلوت