NEIKO 10181A Step Drill Bit Set, 3 Piece, Spiral Grooved for Faster Drilling, Step Bits for Stainless Steel, Metal, Wood, Plastic, Unibit Cone Drill Bits with 31 Step Sizes Total

Quality step bit! Does what it should and seems to be a long lasting product!

Worked great. Good value for price.

Step bits have been great only issue with storage case

Perfect size holes

Should’ve purchased these a long time ago!

I purchased this step drill bit to drill a dash mount hole on my boat. The bit is very sharp and drilled through the fiberglass easily. It is intended for drilling holes in thinner material, otherwise the hole will be tapered (larger hole outside and smaller hole inside). In my case, I drilled the hole to size in my dash but then had to enlarge the back of the hole with a small sander bit. Ideally this bit is probably best for 1/4" thick or less material.

Enlarged four 1" holes to 1 1/8". Worked fine, use oil or cutting fluid. Material was 3/16" thick steel.

I bought this so I could put a new grommet into my Weber Smokey Mountain Smoker. My model was an older model and didn't come with the grommet that allows for temp probes to pass through and monitor the temp of the inside of the smoker and the meat being smoked. When I purchased the grommets (it came 2 to a pack), Amazon recommended this drill bit for making the hole in the smoker to allow for mounting the new grommet. I already have a drill bit like this one from a name brand, BUT it wasn't big enough to accommodate the grommet I was purchasing. So, since I needed this to make my project work and since it was about 25% of what I paid for my other one, I bought it. Also, I factored in that I was probably only going to need to use it once, ever, so it made sense to get this product at the same time of purchase as the grommets. When the grommets and drill bit arrived, I was pleased and excited. I cleaned up the outside of the smoker where I was going to drill and then put some painters tape over the designated spot to try and prevent the enamel from chipping. I then started to drill. The tape seemed like a good idea at the time, but the tape quickly peeled and got stuck in the drill bit. I eventually pulled the tape off completely about 1/3 of the way through for drilling. I needed to make a hole that is 1 and 1/4" in diameter, which was the second to last step on the bit. I was trying not to go too fast 'cause I was worried I would get overzealous and drill the hole too big and then I'd be Really Mad 'cause I would have messed up my smoker. So I took my time and kept on going. When I got about 3/4 of the way through, the bit was not very smooth - not like my other name brand bit. I was getting even more scared that I was going to mess up my smoker and it was making me nervous using this drill bit. However, I had already come this far and there was no turning back at this point. So, I pressed on, but gently. The biggest problem I was encountering was that the bit would catch on the opening it had created with each step that it passed through on the bit and I had to be careful not to cut my fingers, mess up my drill or mess up my smoker. It was frustrating because it wasn't a smooth drilling process at all. However, I eventually got to the stopping point and took the bit out. I could see a nasty burr of sharp metal hanging from the opening I had just created. So I put the drill on the other side of the hole and very gently drilled from that side just long enough to get rid of it and make the opening fairly smooth. Then, I was finally able to install the grommet and breathe a sigh of relief that I had not messed up my smoker. I share all of this with you, the reader, to let you know that this product did work, BUT it was not very smooth and if the name brand bit I had was big enough, I would gladly have used it instead. Knowing what I know now, I would caution you on purchasing this and remember my experience with this drill bit. It Can do the job, but you have to be super careful with it, or you might mess something up that you can't fix later and that would be very, very bad, I would imagine. I give this product 3/5 stars, because it did do the job and the price was nice, but you get what you pay for and you definitely have to be careful with it.

Excellent quality, well priced and delivered on time.

Bu urun çok profesyonel olmayan ev kullanicisi ihtiyaçlarını karsilayacak guzel bir ürün. Ayni amacı karşılayacak uçlar ile uzun süre kullanılır.

I tessted this on a piece of three eight flat bar it cut through easy enough with a little cutting compound J managed to cut a hole the full diameter of the step bit great piece of kit.

Works well. hope it lasts long.

Goes through metal but not as easy as advertised.